Runaway 2 Stroke Detroit Diesel and Ethered Cummins Engine Tear Down

Рет қаралды 661,447

Күн бұрын

Tearing down the runaway 8V71 two stroke Detroit Diesel and the ethered 855 Cummins from previous videos and showing the failures.

Пікірлер: 942

@KT3406E 3 жыл бұрын

Link to runaway 8V71 Detroit video: kzfaq.info/get/bejne/sNZpbMiou9zVlX0.html Link to 855 Cummins ether video: kzfaq.info/get/bejne/mbaYabF326innpc.html

@JJ-jv1gu 3 жыл бұрын

KT3406E you got yourself quite a playground invite me over all bring food, beer, etc....

@michaelcuff5780 3 жыл бұрын

I had a 300 Mack engine do this too. Valve broke off and beat the crap outta the piston. Then pieces of the valve moved to other cylinders and beat on them too. What a mess.

@iBackshift 3 жыл бұрын

Can you set up another "Viking funeral" with a random big liter diesel, sucking in a balloon full of Tannerite? Like say having a tube plumbed to the intake. Trap-door-drop a sausage shape balloon full of tannerite into the intake of an 8v71 or turbo of a 4-stroke. Yeah, that would be great to see what happens.

@billbergen9169 3 жыл бұрын

When charging a dead battery aren't you supposed to charge at low amps?

@billbergen9169 3 жыл бұрын

Make a store where you sell your engine parts.

@JasonTheMunicipalMechanic 3 жыл бұрын

Gotta say I laughed when you drove away the second time and the tow strap was on the ground.

@LukeMitchley 3 жыл бұрын

Like some mechanical Charlie Chaplin scene.

@noahkeebler 3 жыл бұрын

I did too because I know it pissed him off lol

@25aspooner 3 жыл бұрын

Gave a thumbs up because I’ve done the same thing before.

@horrorman9 3 жыл бұрын

That shit was classic!😁

@johnsipes4422 3 жыл бұрын

I was laughing hard ASF

@wiedietie 3 жыл бұрын

My engine thinks it’s a comedian, but I don’t like knock knock jokes..

@chubbysumo2230 3 жыл бұрын

Its the knock knock joke no one likes to hear.

@hunterpero2959 3 жыл бұрын

@@chubbysumo2230 haha good one man

@david197407 3 жыл бұрын

knock knock, who's there, rod, rod who, rod knock lol

@tyboss0025 3 жыл бұрын

Haha

@7rixee 3 жыл бұрын

Dropping one liners is also annoying.

@gac914 3 жыл бұрын

As a mechanic that started out in the mid-70's, I worked for a nation-wide trucking company that, (at that time,) was 100% 6 and 8V-71s. Oil leaks? If you didn't add a gallon every time you got fuel, you started to worry something was wrong. You didn't mention them, but each side of the block had "air-box drains," which were tubing that allowed the excess oil shoved though the whole system go drip, and drip they did. A driver that idled an engine for any decent period of time wound up with two 6 inch or better circles of oil underneath, and going down the road slathered the underside of the truck all the way to the rear axles! California eventually outlawed them, which was the demise of Detroit Diesels as highway trucks. Thanks for this! A walk down memory lane. . .!!!

@DieselDoc78 3 жыл бұрын

gac914 The old timer I worked with referred to them as “Green Leakers”. I’ve only worked on a few, but the memorable one that sticks out was a Roadway truck with a 6V-71. Like you said, it was POURING oil out the air box drains and the scale bitched at them to get it fixed. They brought it to us and we told them it was wore the hell out, but they weren’t having it. We were directed by them to install a ball valve in the drain tubes in no uncertain terms. Did as instructed, and a week later that poor bastard looked like a duck covered in crude from the Exxon Valdez oil spill. It promptly became their yard dog for moving trailers........But the sound of those damn things-- PURE SEX.

@gac914 3 жыл бұрын

@@DieselDoc78 Yeah, and they were pretty fast on acceleration, too! The other thing I remembered after writing the first one was, it was definitely possible to run them "backwards," and doing so they would start sucking the engine oil out and run on that. How do I know?? I had it happen to me once, and the only way in those days to tell was they had mechanical tachometers and while the engine would run, the tach wouldn't. They would run backwards if you didn't give it enough throttle while on a slight incline, and it would reverse the direction. REALLY bad if you didn't catch it right away -- fortunately I realized it quickly and dumped the clutch while holding the brake to stall it!! Fun days, for sure!! (BTW, I can't believe they'd have you guys install shut-offs on the box drains -- there was a management decision by someone who didn't know what they were doing, for sure!!! :-)

@DieselDoc78 3 жыл бұрын

gac914 Typical Roadway management. Pencil jockey that looked at numbers and knew nothing about trucks.......At this point in my life I just need my pops to teach me how to row a pair of sticks before he’s gone. That and I really need to retrofit a 4-53T into one of my pickups.

@gravelydon7072 3 жыл бұрын

There was a way to prevent the oil problem. Airsep made units that went on them to pull the fumes out of the crankcases. We ran ours with a restricted filter so that it put the crankcase under a vacuum. Then the only place the oil could go was out the exhausts. After it was burned in the engine. Still you needed to add 2 quarts of oil every 24 hours of running. We changed the oil every 300 hours of operation.

@gravelydon7072 3 жыл бұрын

@Harry. B. Renner. jr. We ran ours at 1800 RPM normally and not less than 1400 RPM under load in stationary use. If they ran under load at 1200 RPM, you would see unburnt fuel in the exhaust pipes. We actually saw it drip out of the plugs on the bottom of our mufflers so we restricted them to 1400 RPM or above. The overspeeds were set to trip at 1900 RPM so we did have a little fudge factor if needed but then we had to worry about prop cavitation.

@chubbysumo2230 3 жыл бұрын

so, those holes in the head and block, were actually there on purpose! Those were the holes that were used to mate two blocks and heads together when they wanted more than 8 cylinders. The 16v71. Since the 2 stroke cycle does not care about engine rotation direction, they would bolt the front of 2 blocks together, and the front block would turn backwards. They could make V6, V8, V12, V16, and V24 units to order. Many had long joined camshafts that were just turned around to match the new rotation direction. The V12 was a pair of V6's bolted together. The V16 and V24 were V8 blocks bolted together. These were the first truly Modular engines, and only died due to emissions.

@sourbrothers73 3 жыл бұрын

Really? That's pretty mind blowing, thanks for sharing!

@jdlawless_fuel1416 3 жыл бұрын

@@sourbrothers73 not exactly all true but close, the 12v71 is a true v12 block same with the 12v53 I believe. The 92 series is 2 v6s bolted together

@sammybrasch4926 3 жыл бұрын

There was no production 24v71, nor was there a 20v71, but there was a 16v71 which was 2 V8 blocks. The 12v71 was a true 12 cylinder block. In the 149 series, there was a 20 cylinder, and it was two V6s on either end of a V8 block

@werta5000 3 жыл бұрын

The Cleveland and Electro Motive Diesel engines are almost the exact same layout as the Detroit's. of course they dont part for part change over, but they are the same 2 stroke system. Intake ports, 4 exhaust valves, cam shaft controlled injectors. EMD has shaft driven turbos for the forced induction engines, as well as because the EMD motors have assembled blocks instead of cast. So they just build the block with more cylinders, 8, 12, 16, 20

@Deroach 3 жыл бұрын

and if you wanna see one ( twin block DD ) get sent to heaven ... head over to DEBOSS Garage's channel and check it out.

@kcgibbs 3 жыл бұрын

“I am usually trying to create an emergency when dealing with these rather than trying to prevent one.” Beautifully put.

@blainemiller8533 3 жыл бұрын

*water drains for a good minute* "there's the oil" 🤣

@gkft 3 жыл бұрын

"usually I'm trying to cause an emergency when I'm dealing with one of these, not prevent one" 😂 You've got yourself a new subscriber.

@mwestberg1 3 жыл бұрын

Love the explanation of the governor. "bunch of flyweights going around doing crazy S%&t" . I had a 6v71 generator runaway once, I will say you simulated a runaway perfectly.

@y.a.dproductions6819 3 жыл бұрын

Im in the generator field but check the ol rack

@gravelydon7072 3 жыл бұрын

Yep, the governor has to foul up to have it run away unless you don't change the oil like you should. You ought to see what happens when one of the internal fuel lines to the injectors breaks. It can launch the dipstick across a 25 ft wide room. And the engine just keeps on running. Took three oil changes to get the smell of the Diesel fuel out of the crankcase oil.

@jamesanderton344 3 жыл бұрын

@@gravelydon7072 they say a Detroit never runs away....the mechanic does.

@gravelydon7072 3 жыл бұрын

@@jamesanderton344 I liked ours. 14,000 hours on one before an overhaul. By the time I left, there was another with 16,000 hours on it after we did the overhaul at 12,000 hours. And it was still running fine. I set everything to the bare minimum tolerances when doing the rebuild. Our coupling between the PTO and the gearbox allowed for .060" runout. We were unhappy if we couldn't get them to .003" at the max on the dial indicator. That is how close we set things. The head to cylinder liner difference was no more than .001" over the whole head as I shimmed the liners to get them that way.

@megalops87 2 жыл бұрын

I was looking for this comment. LOL!

@LextechLighting 3 жыл бұрын

You can’t complain about how that old White runs. She starts right up and revs like a champ. 💯

@PhuckktheJew 3 жыл бұрын

They don't make anymore great motors anymore sadly

@bobsmith2637 3 жыл бұрын

What's cooler than a 2-stroke Detroit? The big 2-stroke locomotive engines made by GM's Electro-Motive Division, the EMD 567, 645, and 710 (that's CI displacement per cylinder, just like Detroits). The 567 was also developed in the late 1930s by the same engineering team, and is twice the bore and twice the stroke of a Detroit Series 71. EMD engines have fabricated (welded) blocks, and individual cylinders (power assemblies) can be removed and replaced fairly easily. Unlike Detroits, turbocharged EMDs do not have roots blowers, instead the turbo has a clutch and receives an assist from the geartrain when idling or at lower speeds. The clutch disengages once there is enough exhaust pressure for the turbo to start freewheeling. EMDs are all 45 degree V engines, with power outputs ranging from the 600 HP roots-blown 6-567 all the way up to the 5500 HP turbocharged 20-710. The 567 is a legend in the railroad world, as it more than anything else is what killed the steam locomotive. EMD is now owned by Caterpillar and the 710 engine is still in new production today, being used in locomotives, ships and stationary generators all over the world. Unfortunately it failed to meet the EPA's Tier IV emissions standards, so has not been used in new U.S. market locomotives built after December 2014.

@sourbrothers73 3 жыл бұрын

I love KT3's comments section. Everybody's got something worthwhile to contribute.

@jdlawless_fuel1416 3 жыл бұрын

They also had a company called Cleveland diesel I believe

@jbthestoner5504 3 жыл бұрын

That's amazing, I've never really learned about anything railroad related before. Glad I saw this comment 👍

@seamuspillsbury866 3 жыл бұрын

CAT buys a lot of companies and incorporates them but EMD has their market cornered so well they basically left it alone after buying it.

@ColtaineCrows 3 жыл бұрын

General Electrics basically redesigned the EMD engines, not sure if they owned the patent or owned EMD for a while, refined the powerpack concept to make the 30k hour overhaul a lot faster. Welded liner to the head, common rail injection(or at least something very similar), new turbo, It's been a while but that's some of the things I remember from when I was over in Eerie PA taking a V250 engine class. Never really got to put any of it into practice as my boss ended the contract with GE not long after I was over there. Did a bunch of work on a few old EMD's though, marine application, those things were hellish to do bottom end bearings on due to the tiny crank case hatches and a sloppy as fuck special tool for the main bearing nuts. I remember always getting a laugh outta the manual telling you to tip the block over on its side. Replacing the spring drive for the turbo was also always a fun one, that rear timing cover is pretty unwieldy, not to mention the exhaust plumbing _never_ lining up properly. At least adjusting the valves was super quick, turn down until the adjuster touches, 1.5 rotation back and set. Adjusting the injector racks took a bit more finagling but was manageable. Anyway, ancient history by now, not even sure if any of those old barges still float or got recycled yet.

@scottcupp8129 3 жыл бұрын

Recalling my high school days ( Some years ago that's all I say ) I lived out in a census designated place out in Kern county. Miles away from the high school. About 16 miles in to town. Well, I was fortunate enough to ride an old crown school bus. It was a tandem axle. It had one of these 8v71. Well one day after school, we would all tell our bus driver "Home James!!!" Yeah his name was James. He was a good guy and an old diesel mechanic. Well one day after school, he was struggling to get it to start. it WOULD NOT start to save its life. I was one of the back of the bus rowdies even though I was a freshman. Well he cranked on it and cranked on it and CRANKED on it some more. Went it cranked up, it had a stuck rack...We were all on the bus. That sucker starts to wind up!.. All we heard was BWAAAAAAAAAAAAA! James calmly grabbed the CO2 extinguisher and opened the engine bay and snuffed it out till it died. I was in auto class... One of our projects was to remove the engine and check it for defects and free the rack up. Got to rebuild the engine and the city mechanics put the engine back in the bus... Good times!!!

@natedude161 3 жыл бұрын

i love this dudes dry sense of humor, keep up the great content!

@jaredlazaron8414 3 жыл бұрын

I love the way you went through step by step and told all of the idiots that they were wrong, and why they were wrong. Cool and calm can make a person feel WAY stupider than just calling them a moron. Perfect!!

@Deroach 3 жыл бұрын

2:40 I'm getting flashbacks of Old Peg Leg putting er in the ketchup trying to get his concrete truck out.....MINT!

@zachlee7734 3 жыл бұрын

Mint!

@Deroach 3 жыл бұрын

For those who found themselves on this thread and don’t know what I’m talking about ... head over to “ Zip Ties and Bias Plies “ channel. Watch his concrete truck Rez erection and cold start. I like how he mentions to Whistling Diesel what a COLD START actually is lol.

@haydona1845 3 жыл бұрын

@@Deroach Im just gonna fuckin give'r ehh...she'll do just fine. MINT

@chuckisaacs3893 3 жыл бұрын

But now peg has been bleeped out . and it sucks now. I loved ziptie

@chuckisaacs3893 3 жыл бұрын

Need to blow a cat up. That way we can see how each one died

@jordanbartgis3107 3 жыл бұрын

Now rebuild the ole Detroit to show just how tough they really are, a full rebuild would be proper but a new kit for that one cylinder and four new valves she’d likely fire back up..

@jessehackett4983 3 жыл бұрын

why dont u fuckin do it? stupidest idea ive ever heard in my life lmfao

@lawnmowerdude 3 жыл бұрын

Jesse Hackett that’s the stupidest?!

@dh-_1011 3 жыл бұрын

@Jordan Bartgis You ain’t lying. Those engines are tough as they come.

@charlesangell_bulmtl 3 жыл бұрын

I wish he had that much INTEGRITY...but DETROIT DIESEL hatred oozed from him

@whodahellru8124 3 жыл бұрын

Once he found out which cylinder had died, he could have removed the loose pieces put it back together and it would have ran just fine. I got _story time_ with an old navy or marine mechanic and he said those engines don't like to quit as they were heftily built. He said they'd run those engines to the gates of hell and if it busted a piston they'd just unbolt that rod and keep on going with one less cylinder. He said when you're in a hot zone, you did what you had to do to survive _and those old Detroit Diesels didn't give up easily!_

@brianschneir2158 3 жыл бұрын

1982 to 1986 worked with a fleet of dd 6v-53, 8-71 and Cummins big cam 400's. At the end of the day the drivers knew to put a small pan under all the detroit motor's..... Your video brings back memories.

@frankwallace5174 3 жыл бұрын

i gotta tell ya the only thing that matches your level of expertise is your smart assed comments👍👍🤣🤣 you rule!! keep up the great videos man👍👍

@mikehillstrom8987 3 жыл бұрын

Great video, I had the privilege of working on a ship with a 6-71, 8V-71, and two 16V-71. They were designed to be able to take a bullet to the block and if you could keep dumping water in it would keep running.

@charlesatwell6658 3 жыл бұрын

I would hate to be one of your trucks! But I do appreciate you taking the time to tear them down and letting us at least see what fails when something is abused beyond belief!

@HeadRush2002 3 жыл бұрын

Thanks for teardown and explaining everything thats going on. Its really interesting to see the inside of one of these!

@edwardcalvert 3 жыл бұрын

Okay. Thanks. Now that you have done a video where you did teardown and failure analysis of the 8V71 that you allowed to run away. That turns the whole thing into something educational and it changes everything. I appreciate it and thanks to you I have gotten some more good learning. Again well done.

@billythegreat5616 2 жыл бұрын

For a young man you know more about diesels than most who claim to be diesel mechanics. I started working on heavy equipment with my older brother before I was 12. My brother drug me along to his classes when I was 11 or 12 years old he used to tell me learn to work on diesel and heavy equipment and you will always have a decent paying job and he was right I always had a skill set to fall back on.

@TP-xi7ri 3 жыл бұрын

You have such a gentle touch with all of your equipment.

@kellyblack4897 3 жыл бұрын

Been waiting for this! Thanks KT! You’re a brilliant young man, and i very much enjoy the channel!!

@MrRoberoni117 3 жыл бұрын

Love this channel - just wish there were more time-lapsed videos of tear downs and rebuilds.

@LumpyFPV 3 жыл бұрын

...There's third graders that know that..." LMAO. Your videos are all pure gold my man, thanks for the quality content. ♥️

@LumpyFPV 3 жыл бұрын

@Ronald Norman wot m8

@isfeldt34 3 жыл бұрын

Always Loved These teardown / instructional videos. Quite fascinating

@bill8by5 2 жыл бұрын

Love that look on your face when you quick-stepped away from that left side head removal - priceless!! Thanks for doing a teardown on that motor. I suppose looking at it as a science experiment makes it a bit more acceptable. Keep 'em comin' KT. Always enjoy watching and listening to what you are up to.

@haroldbenton979 3 жыл бұрын

This should give you an idea of how tough a Cummins motor is. In April of 97 my mom had a heart attack while I was an OTR driver. I found out at the Kentucky Tennessee line on I 24. I told my boss let Illinois know what was going on and that I was coming in hot. My boss routinely gave around 10k a year to the local state police station for their charity's and other things they asked for donations for. I was driving an 88 IH with a mildly boosted 444 underneath the hood turning a 13 double overdrive transmission with a .5 final with 3.55 rears on 11r24.5 rubber. I literally couldn't go into 13th gear below 70 mph without lugging the motor. Well I pretty much flew across Kentucky get to Illinois and I see 2 Illinois state troopers in the median they see my truck and say driver we are your escorts to get you home faster. You can set the pace and go as fast as necessary to get home. I dropped the hammer on the go pedal and didn't lift until I got home. Motor wasn't happy with me by the end. 3 hours of 2200 run out of 2400 possible rpm and I was demanding every single pony she had. I dropped the wagon bobtIled to the yard and she was sounding like a bucket of bolts in the crankcase by the end. This was Saturday. By Monday morning they had pulled the engine apart and gave me the news; I had burned #2 completely thru and swallowed 4 intake and exhaust Valles total. Yet she got me home. She was overhauled with the right parts for massive hp. I'm talking 850 minimum under full load. Today she's still around hauling grain and other stuff for a close friend of mine. She's got over 2 million on her clock and he has no plans to retire her.

@simonhanlon7518 3 жыл бұрын

Amazing story 👏

@andrewnardo1021 3 жыл бұрын

One of my peeves is when people say that the Detroit 2 strokes are super charged. Then they rebuttal with “well my (insert small 2 stroke gas engine) doesn’t need a blower to run”, then you have to explain to them how a basic 2 stroke engine works to begin with, and why you have the oil mixed with the gas, then you have to explain the Detroit (or any large 2 stroke diesel) and how it works and by that point they just got mad because they can’t wrap their heads around it.

@refusefntk 3 жыл бұрын

I love this channel ❤️ i never thought to look for something like this but i like it.

@litefoot900 3 жыл бұрын

One of the best builders and takers apart on the net great channel!

@lauramildon-clews7850 2 жыл бұрын

My background is in marine engineering. We had a lot of Detroits in all sorts of vessels. They almost ran forever, almost. You are so right about them leaking oil, that for us was a constant concern. I have spent almost 50 years working on Detroits from 6 71s up to EMD 20s. Also, yes I am a female marine engineer, also retired as chief engineer. Interesting video but not unexpected, regards, LJ

@theq4602 Жыл бұрын

if you can give me links or etc to manuals and literature for these detroits I would appreciate it. I need everything I can get my hands on.

@melodienaber3238 6 ай бұрын

Thank you for your service 🙏 ❤

@ralphadams4478 3 жыл бұрын

I use to drive a bunch of 8/71 318 detriots they leaked oil like no tommorrow but were kind of fun to drive you had to run em like a race car ,i miss dat todays engines are whimps no trills

@tinkmarshino 3 жыл бұрын

very interesting.. thanks for the tear down and look at both of those little fun experiments..

@jeffcanyafixiy 3 жыл бұрын

Dude you are a trip. Enjoy the casual disposition and dry sense of humor. GREAT work!! Wish I knew half of what you've forgot about these Detroit's.

@leaderspeakusa 3 жыл бұрын

Amazing how good of shape that engine was internally. Who knows how many more miles she might have driven?

@briantruck2284 3 жыл бұрын

True

@scrotiemcboogerballs1981 3 жыл бұрын

I've been wondering what you were doing buddy I really love those old engines

@SuperMarkbrewer 3 жыл бұрын

Great video and made me smile a lot thank you for your time and trouble to make these videos For us mortal folks it provides hrs of enjoyment

@oby-1607 3 жыл бұрын

What an interesting history lesson on these diesels.All it takes is a runaway fuel rack and some ether. Good teardown.

@CamelGarage 3 жыл бұрын

Thank you! Idk how many people argued that fact. the Detroit with blower only is considered naturally aspirated. If it had a turbo then we’re talking forced induction or boosted stuffs

@jam9297 3 жыл бұрын

He said that with the blower it is considered naturally aspirated...

@seanraymond5590 3 жыл бұрын

It’s def from Detroit “nat aspersed” old school long ago its positive pressure stroke

@redmesa2975 3 жыл бұрын

The blower is for scavenging. IE : moving air, to purge exhaust gases. Add a turbo on top of the blower, then it's a boosted engine.

@CamelGarage 3 жыл бұрын

jam9297 that is what I ment to say

@mr7badass 3 жыл бұрын

I mean theres third graders that know that. Lmfao! Thanks, I needed this video after a looong week kt!!

@patmac 3 ай бұрын

Great videos. Tx for putting in the time to create.

@gethinjones1348 3 жыл бұрын

Great video mate!, full of detailed information about these engines, thanks for sharing man 👍

@KPearce57 3 жыл бұрын

We had 8V92 with twin turbos in the early M-113 APCs, that's why I can't hear anymore.

@tonyunderwood9678 3 жыл бұрын

Uh wut? The early M-113 had a Chrysler 361ci gasoline engine. That was 60 years ago so it's about as early as an M-113 can get. The 361 Mopar bigblock got replaced in the mid/late 60s with 6V53 Detroit V6 diesels although a few M-113s still served with the Mopar V8 through 1970. No turbos on M-113s or M-113A1s until the A3 version which did have a turbocharger on its 6V53 diesel. Maybe you're thinking about something else...

@willmeldrum5052 3 жыл бұрын

One thing that you got to give thees old 2 stroke Detroit is there get up and go is fantastic I am a volunteer in my hometown and we have a firetruck with a 2 stroke Detroit in it and it won't get over 50 however we don't need it to go much faster then that what we need it to do is get up to 50 quick and it can do that.

@jlo13800 3 жыл бұрын

2 strokes respond to load better than 4 joke crap: finally cummins offers a 2 stroke with high hp to weight ratio:mart.cummins.com/imagelibrary/data/assetfiles/0058689.pdf?fbclid=IwAR3PWM1vZs8JxpuZMoJO5Y0YFoF9pV9fuGEhbyiGgxIP0r6sxzhqo5_P9oY. I got a 2 stroke v8 small block and silver 8v92 and they pick up load quick. i hope to repower my f-250 with a 2 stroke detroit so i just dump the gutless 7.3 4 joke in out up front so some kid can take it away. i have the sound of it anyways. you spend a lot on a new car or truck just get a louse 4 joke POS motor in it that compicated and every buying these ugly 4 joke outboards! Atleast rotax in skidoo and lightning are 2 strokes!

@ichbindarren 3 жыл бұрын

I love your videos. They are funny and informative. Keep up the great work

@ryankovaly3927 3 жыл бұрын

I was looking forward to this lol . Thanks for another video!

@f_for_freedom2492 3 жыл бұрын

5:05 There's oil in your water Chief

@marktrujillo6667 3 жыл бұрын

It's been slightly reduced 😂

@kerrygleeson4409 3 жыл бұрын

Always very interesting thanks for sharing your knowledge

@mh-tn3ic 3 жыл бұрын

I love these videos . You may be one of the craziest SOB I know but I learn a lot .

@damonens9478 3 жыл бұрын

Gotta carry a jug of oil with you everywhere with those engines haha

@Eric-dz2rt 3 жыл бұрын

That looked like ziptiesandbiasplies yanking on the frame and doing a burnout. Lol.

@93Martin 3 жыл бұрын

Glad to see you're putting up new videos. I enjoy watching anyone work who knows what the f they're doing, and you definitely fall into that category. And the crazy bull is fun too. Keep them coming! I won't be unsubscribing anytime soon

@krazziee2000 3 жыл бұрын

wow, nothing smells like an old 71 series either.. I have had a couple and a 92 series.. 6v92 TT and you are right about the history, lots of history there.

@teamidris 3 жыл бұрын

Very difficult to hate an engine that can rev that much and only melt a piston :o) It’s hard to believe now, but we really didn’t care about oil leaks. It was simply the way of things.

@mjlmbl 3 жыл бұрын

I wish i had a neighbor like you.

@paulbeavin3026 3 жыл бұрын

Excellent videos! Thanks so much--keep 'em coming!

@ziggassedup 3 жыл бұрын

I love your method of disassembly.

@Jacweninger 3 жыл бұрын

A detroit is the best way to turn diesel into noise

@siliquaesid703 3 жыл бұрын

Hell yeah, but WHAT a noise!

@gb4408 3 жыл бұрын

Considering the abject abuse the engine suffered, it suffered very little damage, no coolant, designed with intent to be a runaway. I'd say your criticism of the engine bears little. Cheers

@martinhawkes2823 3 жыл бұрын

Your right, the guy is a total fuckwitt, he say's he knows nothing about them which is an understatement then critisizes it after all its been through plus probably a million miles on it before this cretin got hold of it.

@samthesr20man 3 жыл бұрын

"low power, high fuel and oil consumption" anyone that knows detroits knows these statements are true...

@ozzyrios.560 3 жыл бұрын

Love your vids man can’t wait to be able to overhaul an engine

@heavymachinery2843 3 жыл бұрын

Always learning something from you good Informationen

@3rdfarmer86 3 жыл бұрын

the funny thing is that after all of the mistreatment its seen, that cummins could still be overhauled and rebuilt into a running, useable engine. just goes to show that those oldies really were built to last

@proluxelectronics7419 3 жыл бұрын

This guy is a diesel magician, When he says it's F'ed its F'ed....Watch his rebuilds...

@thedunebuggyboi 3 жыл бұрын

I can’t like your videos enough times man. Bad ass shit! Super good quality builds and good content!

@smithschubert3255 3 жыл бұрын

I love all the videos that you are filming and posting, you give more indept details on engine rebuild and I feel sick everytime you're not posting a new video, Please try your best and film more videos cause some of us out here really learn from you, especially me.

@jefffaubell5271 3 жыл бұрын

I am amazed that Detroit only had real damage to 1 cylinder. I believe that engine could be rebuilt and used again if one were so inclined to do so.

@jdlawless_fuel1416 3 жыл бұрын

If I had the money it would be mine. I'm a teen getting into this but alas have no cash

@jefffaubell5271 3 жыл бұрын

@@jdlawless_fuel1416 been there done that! This kind of project started me into a career that lasted 42 years. Took an old engine got it running and built a pickup around it, was my daily driver in school. When I started working, got enough money together to rebuild it.

@ironmatic1 3 жыл бұрын

“stuff in there that spins around does some crazy shit” I love the detailed explanation 😂

@edwinharvie6174 3 жыл бұрын

Love the way you warmed up the white truck!

@wth82 3 жыл бұрын

Man you have so much fun I love the sound of a v8 detroit

@rfortier1615 3 жыл бұрын

Save the old Detroit’s. Bad things are coming

@mikecorleone6797 3 жыл бұрын

R Fortier after that chinese EMP strike and everyone’s vehicles are fkd i’ll be laughing and headed towards the hills with my 671 detroit diesel crown bus..

@y.a.dproductions6819 3 жыл бұрын

We have a 271 671 692 871 892 1271 just for emp puposes

@mikecorleone6797 3 жыл бұрын

Quirin M. I do have a new ford ranger but i also have a 1970 f100 with a mercedes turbo diesel engine all mechanical engine. This thing runs on whatever i dump in the tank.. diesel, kerosene, jet 1-A, motor oil, waste oil, food grade oils, hydraulic fluids, transmission fluids, brake fluid, bbq lighter fluid... I’ve tried it all lol kzfaq.info/get/bejne/fMCkdpukvMfUd40.html

@jlo13800 3 жыл бұрын

Have you tried 93 octane unleaded with castor oil 2 stroke in it. I not only filled a 6-71 with quicksilver TCW3 syntheic 2 stroke oil. i dumped in some old gas/oil outboord mix in to fuel tank ofor this winch motor. it stared easier, ran better and oil stayed cleaner! there was a guy who bult a 2 stroke out of a 5 cylinder mercedes diesel om617 and ran it on regular gas! It was a poppet valved 2 stroke and is that what you did on yours?

@nathankirschbaum3856 3 жыл бұрын

I do like the videos. Keep them coming.

@deanwhite9575 3 жыл бұрын

Bro” your channel is intense...POP’s always told me if you drive truck you also need to be a mechanic and you skill is next level..bravo👏🏼👏🏼👏🏼👏🏼

@backcountryrider2643 3 жыл бұрын

So... if I pay shipping can I have the blower? Lol

@josephbugaj8149 3 жыл бұрын

Can probably slap it on a car or truck.

@mechanicalking 3 жыл бұрын

That blower is crazy loose judging how easy it was for him to spin it

@josephbugaj8149 3 жыл бұрын

Could be that easy to spin.

@willbrown4600 3 жыл бұрын

@@josephbugaj8149 probably

@matthewtaylor3308 3 жыл бұрын

Was gonna ask the same thing...

@michaelbenoit248 3 жыл бұрын

Before the tear down starts I can tell you exactly what happened, the rack got stuck & got set on full/run away mode. It’s a travesty you let the engine go, it could’ve had another 40yrs left in it.

@scottglennen5498 3 жыл бұрын

please don't stop making videos. this shit is pure gold

@danielpullum1907 Жыл бұрын

I enjoy seeing a man who enjoys his work!!!

@75Bird455 3 жыл бұрын

Look, it's a baby EMD!

@jlo13800 3 жыл бұрын

What does this have to do with an EMD. they are both 2 strokes though.

@grahamefreestone5309 3 жыл бұрын

22:58 my first pee after a multivitamin.. 😂😂

@lorriecarrel9962 Жыл бұрын

This fellow learned and picked up quick in life,good job man

@davesmith5914 3 жыл бұрын

Great video. Thanks for your efforts.

@thundermite1241 3 жыл бұрын

Id like to see the detroit swapped into a k5 blazer

@stanleykendziorski7964 3 жыл бұрын

An 8v71 weighs 2400lbs buddy

@jdlawless_fuel1416 3 жыл бұрын

@@stanleykendziorski7964 aint gonna fit anyways. Best chance is a 6v53 into a built k30, but you could use a smaller 3-4 cylinders

@wyattlewis8671 3 жыл бұрын

@@jdlawless_fuel1416 even the 3 cylinder version is almost as heavy as a 6bt Cummins. The 6v53 is somewhere around 1700 lbs. I'm sure you could make a 1 ton pickup handle that fine, but it's never really going to be good at anything other than sounding cool.

@ryotaryuu 3 жыл бұрын

Nothing sounds like a 2 stroke diesel either.

@jlo13800 3 жыл бұрын

Have you ever heard the OMC v8 small block 2 strokes, they sound good to they can make insane power per CID and dont need an external blower to run it. Monte racing mounted an 8v71 blower to make well over 850 hp out of 244 CID!

@KARR 3 жыл бұрын

Thanks for showing us the outcome!

@rickburton72 2 жыл бұрын

Man i really enjoy your videos

@bradleysmith6442 3 жыл бұрын

Those old Detroit were a great industrial engine.

@carltonlane8931 3 жыл бұрын

My god I’m spitting feathers,do you know now hard it is to get white roadcomander parts,I’m renovating a cab over,parts so difficult,and in,the USA take a jcb to um,shit,I spat my tea out.

@wraithette01 3 жыл бұрын

Thank you for another excellent video!

@willywgb 3 жыл бұрын

Fun Video. I had a International DT466 runaway on me right after an in-frame. If you want to over fuel a Cummins, plug the return line. I remember the older mechanics saying you should keep the engine manual handy to place over the intake if you had a runaway. Or use a Co2 fire extinguisher to displace the oxygen. And the best one, keep a hammer close and start breaking off the fuel line fittings. Cheers Willy

@Masterkill45588 3 жыл бұрын

I was mostly surprised that Detroit is actually still rebuildable and the block wasn't destroyed

@aviator97msncom 3 жыл бұрын

That was a overreved or ungoverned engine. A run away is a diesel that is fueling itself with its own oil.

@davidstjames_ 3 жыл бұрын

Yes, I agree. Judging from the number of likes for this video, there are plenty of people that know as little as he knows about engines. I just unsubscribed. Have a great day!

@declanvanarkel9094 3 жыл бұрын

My thoughts exactly, runs away on oil vapour not an ungoverned injection. Youd expect lack of lubrication to sieze the engine up proper

@pettttson 3 жыл бұрын

Stuck injector runaways are more common with detroit's. Though I do agree with your statement. But since most of them don't have turbos, you'd have to greatly overfill the crankcase oil for it to run away

@darylmorse 3 жыл бұрын

@@davidstjames_ Lighten up. If you watch any of his videos about rebuilding CAT engines, you can see from his attention to detail that he knows them very well.

@allensnook7760 3 жыл бұрын

Such carnage that was narly,but enjoyable,glad you tore apart for our viewing pleasure,snookie pa.

@whiskerbiscuit6209 3 жыл бұрын

i remember the massive butthurt from that original video and laughed so hard. thanks for making this followup video because i learn a LOT from you showing the innards and explaining things so thank you. I subscribed a long time ago because firstly you educate me with engine knowledge but you also tear shit up which is entertaining.

@terryjackybishop8995 3 жыл бұрын

No way would a cat or Cummins last as long as that Detroit did running away.

@jlo13800 3 жыл бұрын

no 4 joke would, 2 strokes are tougher and designed that way. I had a my ccw 440 snowmobile run away and it just broke some rings, It was a jdx8 snowmobile. i rebuilt it and it ran fine. How would this chevy 2 stroke sound :www.4btswaps.com/attachments/2cyclesbc-jpg.6839/

@wallysworkin823 3 жыл бұрын

Only good thing about the Detroit is the sound, that’s it.

@jdlawless_fuel1416 3 жыл бұрын

Never ran one then bud it's a solid motor decent power and built well

@shawnbirt4161 3 жыл бұрын

You cant argue that they were incredibly well built. All the major diesel engines makers have great engines ( Cat, Cummins, Detroit, Mack) but Detroit was definitely the king of 2 strokes and they could just about run forever.

@lisajohnson8566 Жыл бұрын

Well the education continues - Thank you! While I mentioned before I wasn't a diesel mechanic but a mechanic I am. I used to volunteer for a railroad museum and got my hands dirty a lot on locomotive engine. I would be shown how to do a task and off I went. With that said General Motors Locomotives had two strokes in them and I thought that the "blower" was like a turbo with a diffent drive. Little did I realize that the purpose for that blower was for the two stroke air exchange. Again thank you for the education!! Love your video's.................

@JMART887 Жыл бұрын

Pretty impressive the materials held up except really 1 cylinder fail. That thing was cooooking and each piston looks fair for what they went through. Thx from Australia mate!