I am impressed with the suction. I bought mine for cleaning the gutters, but I use it for all sorts of jobs around the workshop too. :-)

My gutters regularly block and end up full of water and leaves Brian. I usually get a bucket and a set of step ladders then take all of the leaves out by hand. I needed a way of dealing with leaves and water. :-)

Yes, I'm a Hull lad! The fence is there to keep the dog safe. The garden carries on after the fence! :-)

Glad I could help! :-)

Glad I could help Chris! :-)

It copes well with wet leaves, it is small twigs that occasionally cause a blockage, but this is easily cleared. I used the vacuum to remove a large amount of wet leaves from the swimming pool cover and was impressed at how well it dealt with them. The issue I had with the pool was the cover being sucked into the nozzle and blocking it. The leaf blower must be a nightmare Mark! :-)

@@RussellPlatten Yup. I enjoy your videos.

Thank you Mark! :-)

:-)

The car floor carpet will contain lots of fine dust and will definitely need the dry filters. It is a powerful vacuum and will probably be great for detailing. Swapping over from dry to wet is easy, and the tank is easy to empty and clean. I rinsed mine when I finished each task. It is easy to dry the tank if you rinse it. The only issue as far as I can see is the hose. If you use it for wet applications it takes a long time to dry out due to the ridges. You can get a spare hose easily power-spares.co.uk/hyvi10030-genuine-replacement-hose/ and use one hose for wet work, the other for dry. Another alternative is to use a seperate cheaper vacuum for wet work. One thing you need to be aware of is that the crevis tool and the brush do not fit the steel tubing and need to be attached to the end of the hose. I hope this helps! :-)

@@RussellPlatten i see thanks for the information, as far as i am aware HEPA filters should be watertight, so might experiment with the HEPA filter without the bag, see if its dry on the inside after use, if so i don't mind using it and drying it after use instead of changing modes in the middle of a detail. and save the spare for true dry applications. as my current shop vac is 3 years old and has been jet washed on the filter and never seen any issues with the HEPA filter letting anything get past it.

@@MorganJoe I have a another vacuum where the flter is washable. It isn't a HEPA filter, but you may be ok. :-)

@@RussellPlatten some experimenting will be done before going full throttle, I've never filled a 8L bucket with water in my old shop vac so i doubt this will see much more, hopefully it works. if not ill be testing the customer support of Hyundai for us both. obviously if I ever need it for purely wet, ill use the sponge filter, just cant see the issue with hoovering 1000ml of chemical out of the carpets of a car with the hepa.

@@MorganJoe Let me know how you get on! :-)

With an extension tube! :-)

@@RussellPlatten ok pal thanks alot for replying to me

That's what I'm looking at one for and I think it's definitely powerful enough, I'm gonna save some money compared to a more expensive brand but I've been told not to cheap out on poles as ally ones can get heavy when doing hours of constant work which I very much believe 🤣 go carbon invest in your body