Rust & Paint Removal dump truck I nearly made a schoolboy error

Рет қаралды 28,188

7 ай бұрын

Grit blasting a Truck bed if you enjoyed the video press the like and drop a comment would be nice to hear from you :)
Please be kind and respect the fact these videos are a hobby for me if you want to see more content press the subscribe and ding the bell then you will be notified of my next uploads see what els I blast.
As always thanks for watching much appreciated!
Hard doing for easy viewing :)
If you are a blaster and require help please drop me a message on here. Please don't email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos :)
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting

Пікірлер: 71

@davidschank956 7 ай бұрын

Ya. I love seeing the cran after it got painted it looked brand new.! You should do that more wear before and After photos people love it.! And it could help your bisness too.! You know The quality of the sandblasting work that got it to look so good.!

@Mobileblaster 7 ай бұрын

I would love to film the painting and hand over back to the customer fully finished but that's not my job I've to keep working if I could take time off to film I would but bills etc come 1st unfortunately 👌👍

@phenogen8125 7 ай бұрын

Another first class job; loved seeing the painted crane.

@Mobileblaster 7 ай бұрын

😊👌👍

@wcsd9577 7 ай бұрын

Nice job, looks like it came off nice and cleanly. You do great work!

@Mobileblaster 7 ай бұрын

😊👌👍

@philglover2973 7 ай бұрын

Awesome video Mick very much appreciated top job 🇬🇧👍😎

@Mobileblaster 7 ай бұрын

Thank you 😊 👌👍

@brentkingnwagent1347 6 ай бұрын

Beautiful work.

@Mobileblaster 6 ай бұрын

Thankyou 😊👌👍 I appreciate it 👌👍

@davidschank956 7 ай бұрын

Mick.! Get some of throus hand warmer packs to put in your gloves Thay work really good one on top And one in your palm of your glove.! Trust me.! Just try it I work outside In Michigan in the USA and it get really Cold so cold it is painful.

@Mobileblaster 7 ай бұрын

😬 them days are the worst when your hands get so cold you cannot feel them then when ya stop and try to warm them up the pain is unreal them other gloves was much better 👌👍

@paulf2529 7 ай бұрын

I recommend getting some thin merino gloves to wear under your work gloves, this works out better than buying thermal work gloves that either get lost or wear out by the time you want them. The crane looks superb, your blasting certainly paid off, impossible to get as good a finish otherwise.

@Mobileblaster 7 ай бұрын

I'm going to put my coat in the van and get a bigger pair of padded trousers so I can pull them over my normal bottoms 😊

@canalboating 7 ай бұрын

Crane looks mint

@Mobileblaster 7 ай бұрын

Luckily I got some footage as it was gone back to the owner by the time I finished the tipper 😬

@WombleUK 7 ай бұрын

I'm impressed with just how good that crane respray looks. Nobody would believe what a battered up old crane that was a couple of months ago. Like you said before you rarely get to see the jobs finished after you blasted them so must have been a pleasant surprise. I know what you meant with the weather I went out at 6:30am this morning & it was -3°c it's dropped to 3 or 4 degrees a couple of times in last couple of weeks but today is first time this winter into the minus.

@Mobileblaster 7 ай бұрын

🥶😬

@scottkenzig5144 7 ай бұрын

Great job all round mate 👍. The crane came up nice 👌. Bugga them cold 🥶 hands. Great video 👌👍

@Mobileblaster 7 ай бұрын

🥶🏴󠁧󠁢󠁥󠁮󠁧󠁿😎🇦🇺🥵 just as I'm freezing your just coming round to summer 😊

@scottkenzig5144 7 ай бұрын

@@Mobileblaster 😁 the world 🌎 keeps turning 🌏😅🤟👍

@Mobileblaster 7 ай бұрын

@@scottkenzig5144 😂

@joeroad6618 7 ай бұрын

I thought they used Celsius in the UK not degrees? that's damn cold either way! stay warm my friend! Seeing that crane painted up was awesome!

@Mobileblaster 7 ай бұрын

We use Celsius I know it doesn't sound mega cold but it was 14° the day before dropping to 2° was too fast for me to get ust to 😂 I've been fine working on the van this weekend and it's been 4° just tuck me off guard dropping as fast as it did 🥶

@ianlitchfield9273 6 ай бұрын

It's only the USA that uses Fahrenheit 😢 the rest of the world uses Centigrade 👍🇬🇧

@25vrd48 Ай бұрын

Working in the low temperatures and the wind making it a hell of a lot worse makes for a very long day .

@Mobileblaster Ай бұрын

Sound like you have been in the same boat 😂👌👍

@BradWhoFilms 7 ай бұрын

Great video man I just came across your channel. I sandblast and paint myself. Have only been doing it for about 6 months! I enjoy it and love getting videos from start to finish too. Good to have pride in your work init! I'm in New Zealand

@scottkenzig5144 7 ай бұрын

Good on ya mate 👍. G'day from across the ditch. Mick's channel will teach you alot about sandblasting 👌. Take note and ask questions because Mick will do his best to answer them and give you great advice 🤙👌👍🇳🇿🇭🇲🏴󠁧󠁢󠁥󠁮󠁧󠁿

@Mobileblaster 7 ай бұрын

😊👌👍 I can only try my best 👌 👍

@BradWhoFilms 6 ай бұрын

@@scottkenzig5144 cheers mate yeah he's got awesome videos haven't found anyone else that dose blasting and films it.

@BradWhoFilms 6 ай бұрын

@@Mobileblaster I have been taking notes!

@cyberhornthedragon 7 ай бұрын

crane looks a new penney Mick i do like the fact your blaster just erases rust scale lol i wish i could get ya to blast my 35 yr old 4runner the rear fenders are crusty rust

@Mobileblaster 7 ай бұрын

😬 magic wand 😂

@francisarmstrong6463 7 ай бұрын

Mick ,try putting on a pair of latex gloves first then your other gloves ,I used to do it when I was bricklaying in the winter,it’s like having a cavity where the air is trapped inside try it it might surprise you.

@Mobileblaster 7 ай бұрын

Nice tip 👌 I will try this as I've got some in my water jetting box in the van 👌👍 I like basically free tips lol

@lesbaty8919 6 ай бұрын

A bricky told me this a few years back and it works a treat

@Mobileblaster 6 ай бұрын

@lesbaty8919 I've tried it it works to some degree but the blow back is just too much for gloves to cope fitting the cooler is a perfect way to be able to dry the air (dry air is essential for the pot to operate properly) but it lowers the ambient air to aprox 15° and the volume and speed of air required to blast is unavoidable I think some heated gloves or wind proof plus insulation is required 😊

@thomtrucker1925 6 ай бұрын

I used to sand blasted my truck and machinery or just parts for repairs. A few years ago i bought hand held laser gun and changed everything.

@Mobileblaster 6 ай бұрын

Your sales pitch won't work with me I've done extensive research on these and know the technology isn't their for lasers just yet 😊👍

@mcdowellsabrasiveblasting 7 ай бұрын

Check the fuel pick up tube inside the tank, mine was corroded and was pulling air in threw pinholes in it, i fould it after replacing every fuel line on the compressor xD

@Mobileblaster 7 ай бұрын

😳 It's plastic I believe? I've removed the screen off the bottom of the pickup pipe in the tank thinking it was that but it's kinda temperament as I can prime it up and it will be fine then 1 day it's in limp mode I was thinking the auto drain may be at fault or the elbow on the housing. I don't want to spend too long trying to fix it tho because like I say I plan on putting a external tank and running new pipes etc

@jimsvideos7201 7 ай бұрын

There are heated work jackets that run on power tool batteries, if that's helpful.

@Mobileblaster 7 ай бұрын

I need to work faster 😏😂

@carlj3515 6 ай бұрын

👍👍👍👍👍👍👍👍

@Mobileblaster 6 ай бұрын

😊👍👌

@phoenix546 6 ай бұрын

Should be putting some heavy plastic sheeting down on the ground to catch as much paint debris as possible to minimise pollutants in the soil and cover up the hydraulic lines, cab and the radiation/cooling system for the truck. That media gets everywhere and doing some preventative measures will stop you damaging stuff

@Mobileblaster 6 ай бұрын

You could spend pointless hours (putting more co2 into the environment with heavy plastic sheeting) sheeting the ground up or you could research and use recycled media that is not toxic to the environment also delve a little deeper and find out what's been removed water-based paint none toxic and biodegradable. Then you could waste I duno how many hours masking pipes engine components etc or you could have (well I wouldn't like to guess hour many hours of experience) someone like me doing these and still yet to damage any pipes wires or even damage the engine components. Or you could get a guy that's new and not much skills and end up doing as you say. (Spending lots of hours doing pointless stuff and billing for it) Please don't tar me with the same brush as a start up alot more is going off that's not been filmed. I'm not a how too channel purely just something I enjoy doing I'm not saying it's right way or the wrong way I'm just saying what I believe and is the most cost affective way of doing this. Because as said before alot that's not shown is value for money start hitting them with a bill for sheeting and masking up the likely hood is your not going to be competitive and they will find other methods to do this then that's the end of that.

@user-tk1bw1em8g Ай бұрын

That's telling him You the man bubba Always have that guy that knows more or has did it once or seen it done and knows better Lol Too good

@ringstinga 7 ай бұрын

How often do you have to fill up the pot on average Mick , Just curious 😊

@Mobileblaster 7 ай бұрын

Aprox once per hour or round abouts 👍

@shogunkeith699 7 ай бұрын

You said your hands are cold, maybe get some inner gloves like wicket keepers use 🤔 good job pal

@Mobileblaster 7 ай бұрын

I've tried a few options today and I'm going to say the was still cold haha

@user-tk1bw1em8g Ай бұрын

Do you get to adjust how much stuff comes out or is it a set thing an you have to just roll with it

@Mobileblaster Ай бұрын

I have alot of control of the media also the psi and the flow of air makes alot of difference 😊👌👍

@hansdreisbach9520 5 ай бұрын

How much did you charge for that crane ? Looks like a ton of work

@Mobileblaster 5 ай бұрын

For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick

@RDevx70 6 ай бұрын

Does the cleaned surface not flash rust instantly?

@Mobileblaster 6 ай бұрын

No that depends on how dry you can keep it humidity levels etc. I've had stuff sitting in unit for months and it still looks as good as it was 1st blasted and I've had stuff blast in the morning and left it in the van to drop it off and later in the day and it looked as bad as I've not blasted it 😂

@plester1000 5 ай бұрын

I just wondered how you control the waste products created from the sand blasting? looks like a car park and grassed area covered in glass based sand and a mixture of old probably oil based paint that potentially could contain lead if the paint was old enough. Do you clean the area afterwards? that must be a huge job?

@Mobileblaster 5 ай бұрын

Yeah, it's crushed glass none toxic and the paint was water-based should biodegrade. lead has been banned for a very long time in the UK even longer for vehicles. (Oil based paint is also banned for commercial use and this truck was made after that law) the customer body shop is happy with the mess been left its their private land 👍

@paullester5138 5 ай бұрын

Cheers for the reply, much appreciated 👍