SandBlasting 10ft shipping container and prim after a fire refurbishment

Рет қаралды 20,331

Жыл бұрын

Removing paint and fire damage off a 10ft shipping container sandblasting and priming with red oxide if you enjoyed the video press the like and drop a comment would be nice to hear from you I read every comment and try to reply 😊
Please be kind and respect the fact these videos are a hobby for me if you want to see more content press the subscribe and ding the bell then you will be notified of my next uploads see what els I blast.
As always thanks for watching much appreciated!
Hard doing for easy viewing :)
If you are a blaster and require help please drop me a message on here. Please don't email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos :)
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting

Пікірлер: 91

@terryjacobson7325 Жыл бұрын

Hello from Australia my 3 and 4 year old grandchildren love your videos

@Mobileblaster Жыл бұрын

😊👌👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺

@ianlitchfield9273 6 ай бұрын

Found your Chanel about a week ago & now binge watching every night 🤓 I always leave a thumbs up 👍🇬🇧

@Mobileblaster 6 ай бұрын

Glad you are enjoying the content I appreciate you sticking a thumbs up not sure how it helps but KZfaq prompts content creators to ask for likes and subscriptions my opinion on this is if you watch a video and like it, that's when it should be pressed if someone enjoys the channels content and wants to see the latest videos uploaded that's what the subscribe button is for I did fall for the prompting that youtube encourages but soon realise the best viewers are the one that reach out like your comment it means a lot more to me that you don't need prompts so thank you 😊👌👍

@ianlitchfield9273 6 ай бұрын

@@Mobileblaster That was a fast reply 👍 just out of interest how long did it take to blast the container & how much grit did you use ? (In weight or bags, however its measured ?) Ive been in the motortrade most my life restoring vintage vehicles so I've taken hundreds of items to the blasters but never watched the process 👍🇬🇧

@Mobileblaster 6 ай бұрын

@ianlitchfield9273 I was just heading to bed stud at the door waiting for the dog to do her business so I had my phone in my hand 😂 in all honesty blasting containers aren't really worth doing as the costs involved out price a good 2nd hand unit sometimes is false economy but this just happens to be a different story insurance paid out on the container and he got to keep the old 1 so didn't mind the costs. Inside and out I cannot remember off the top of my head but I would say around the 600kgs of media it could have been more or it could have been less like I say I cannot really remember 👍

@philglover2973 Жыл бұрын

Excellent video Mick good job👍🇬🇧

@Mobileblaster Жыл бұрын

Thanks Phil 😊 👌👍

@OuradventuresGU Жыл бұрын

Top job as always, almost like new again and plenty of life in them!

@Mobileblaster Жыл бұрын

Like a brand new old en 😂👌

@jameslindeman2562 Жыл бұрын

So mesmerizing to watch. You have a very steady hand. Fantastic job. Keep on blasting on.

@Mobileblaster Жыл бұрын

😊👍👌

@user-xo5bg8ze4c Жыл бұрын

@@Mobileblaster Hello, from Russian sandblasters. Can you please tell me what is your price for the job? By squares or by hours?

@Mobileblaster Жыл бұрын

@Дэньчик Ник hi I don't put this information into my videos because of a number of reasons hope you can understand some stuff needs to stay private. 👍

@Mobileblaster Жыл бұрын

@@user-xo5bg8ze4c I charge per job 👍

@scottkenzig5144 Жыл бұрын

Nice job Mick 👍👌🇭🇲🇬🇧

@Mobileblaster Жыл бұрын

Thanks mate 👌👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺

@x-con-x Жыл бұрын

Amazing job as usual Mick. I am slowly getting through all your videos. I have found a mad desire to do this type of work,but have no idea where to learn lol so watching your work is a massive help.

@Mobileblaster Жыл бұрын

Don't take every thing I do as they only way once ya have some time under the hood you will find what works for you 👌 if your ever stuck on a project drop a line on hear and I'm sure we all as a community can help out if I cannot directly answer. And a little help once you have gone through the videos check out my playlist of unlisted content over 100 videos in that playlist 🫡👌👍

@SonofChurchill Жыл бұрын

Mick Times money can't be pissing about with that switch. They need send a new one for free.

@Mobileblaster Жыл бұрын

Sponsorship welcome 😂😂

@andrzejporeda7281 5 ай бұрын

Super pan ten kontener na dowożenia złomu w piaskował jestem bardzo zdziwiony i zadymiony tak zaangażowaną pracą jak pan wykonuje jest to super i fachowo wykonany Pozdrawiam mile i serdecznie👍👍👍👍👍🙏

@Mobileblaster 4 ай бұрын

Yeah I have a very wide scope of work 😊👌👍

@thomascoyne157 Жыл бұрын

Nice work 👍👍👍

@Mobileblaster Жыл бұрын

Thankyou 👌 😊

@ianweniger6620 Жыл бұрын

Hello from that northwest bit of Turtle Island you might know as Vancouver BC! This video was great. You cleaned down to the bare metal.... and then got a bonus coat of paint on! My only question is...what about the top of the can? I suspect other folks have already asked, so I'll check the comments. Sandblasting seems like a meditative gig. All the KZfaq carpenters whinge about sanding. To me it's like a slightly cleaner sort of gardening. There's a smell, a taste, a rhythm, a sound, a feel, and shadows and sheen. The noise of the compressor and the safety gear likely take away some of the meditation. The weather seems like a fair trade: outdoors but maybe too warm or cold. As much as ASMR is fashionable, I'm as attracted to your channel by the blasting as I am by your soundtracks. While you might play whatever you like, the retrotechno on this video fits the gig. I prefer to see the bare surface of your metal items. I appreciate that some of your customers don't require 100% clean surfaces. I can always skip to the videos that get down to the OG material. The first time I heard the word "sandblasted" was in high school. I was listening to Frank Zappa's "Jewish Princess." That reference left me confused for years. My school principal also confused me because why I mixed up sandblasting with stucco. My school was in a graffiti battle with another school up the hill. Our principal got on the tannoy and told us that our antics were costing the school district in sandblasting costs. One day I saw the repair in progress and it wasn't being cleaned. A worker was up on a cherry picker with a bucket of stucco mix. They were flinging a trowelful at a time at the painted part of the wall. Most of the mix fell onto the ground. I didn't think that was blasting anything. The first time I saw proper sandblasting was on Hand Tool Rescue a few years back. It seemed like overkill on parts that could be cleaned by stripping fluids and wire brushes or wheels. Then I saw ship maintenance videos and felt like that was more like it. Anyways, thanks for the content and I hope your gigs are as satisfying as they look!

@Mobileblaster Жыл бұрын

Thank you 😊 yeah some customers don't require deep clean and to stay competitive on price I've to find the balance of just enough 👌 I enjoy the blasting more than painting so I try to stay clear of paint 😬

@davidschank956 Жыл бұрын

Hay there mick.! It looks like your getting into the painting business to.! Hope your charging for that to.!

@Mobileblaster Жыл бұрын

Nar it's only a rare occasion I try to stay away from painting if I'm honest I don't enjoy it as much as blasting and I don't like that haha

@JacobFox-jo3fj Жыл бұрын

I sand blast a lot at my job. i see your using a 1/2 inch or inch sand pool. Brother you need a 4 inch flat sand head. it cuts four inches wide at a time. it will make your job a lot easier and better results as well. And awesome job on that by the way

@Mobileblaster Жыл бұрын

The flat nozzle just stretches the hotspot out so you lose the intensity of the cut similar to stepping back yeah the hotspot is bigger but less affective. Flat nozzles are only useful if the serface only needs a very light clean 👍

@steffanboyd01 Жыл бұрын

Nice videos mate. What camera setup do you use for filming POV? I do sandblasting myself and wanted to make a channel but I need to figure out a camera setup that is handy to quickly setup but also doesn’t get destroyed by the blast. Cheers

@Mobileblaster Жыл бұрын

Gopro hero 9 and 10 but I wouldn't say they are the best available just that I'm into the eco system now with extra batteries clips clamps etc

@JacobFox-jo3fj Жыл бұрын

And switch that tap button to gun control with a trigger you will love the set up

@Mobileblaster Жыл бұрын

I had the RXL but the micro switch packed in I didn't want to spend £300 on another so tried different kill switches with no joy I have a red top cap ball and chain on order from overseas. Hopefully this 1 will last longer 😊

@truthseekerreal1 7 ай бұрын

Could you do a video on your POT set up, i am in Iraq and have a contract part of is blast cleaning to SA2.5

@Mobileblaster 7 ай бұрын

I'm not a how too channel unfortunately 👌👍 if you can take anything from the videos please do so but I'm not saying what I do and how I do it is the only way what works for me may not work for you and alot can go wrong very fast 👍 please stay safe and I wish you the best of luck 💪

@stephensmith1984 22 күн бұрын

Hey there mick,gritblaster/metalsprayer/ painter from nz,is the electric deadman a choice over air,have only used electric once myself

@Mobileblaster 22 күн бұрын

Eyup mate I would pick electric over air because it starts alot quicker and stops just as quick plus the wire is lighter and less chance it snagging on stuff 👌👍

@picklepee2771 8 ай бұрын

The Wiwa pumps would work a bit better. They have a ton of output

@Mobileblaster 8 ай бұрын

Yeah possibly so that's one of the main reasons I don't do painting (I'm not setup properly) its not something I enjoy 😬 so I don't go too deep into the painting side of things 👌

@picklepee2771 8 ай бұрын

@Mobileblaster if you did you could make a killer buck as a blast and coat specialist. Working from Newport News shipbuilding I've seen those spray pumps throw out a ludicrous amount of paint. However, not matter what, even a "perfect" spray job will need a few days of touch up work and it's extremely tedious. So I can see why you blast 99% of the time

@Mobileblaster 8 ай бұрын

@picklepee2771 To be honest I've never needed the skill my brother ownes and operates a commercial body shop and it was through him I got into blasting in the early days he got most to all the contacts I needed all we would do is on site blast and he would paint then he would go down a slightly different root doing full restorations of modified motors kinda leaving me with a skill and equipment needed to venture my own root we still do the occasional big heavy stuff no one else likes to take on but not as much these days

@Mobileblaster 8 ай бұрын

@@picklepee2771 kzfaq.info/get/bejne/rpmigtCbx96-iWg.htmlsi=4k01P5PKtvMwXh4van unlisted video of mine he ended up painting unfortunately I didn't get any footage of the painting but this is the kinda stuff we do together

@jasondeguire6322 7 ай бұрын

Just out of curiosity how long did this take you and how much media did you use?

@Mobileblaster 7 ай бұрын

I cannot remember off the top of my head around 5 hour and I didn't count the media

@jimmieandersson813 7 ай бұрын

What size of nozzle are you using here? Greetings from Sweden 🇸🇪

@Mobileblaster 7 ай бұрын

850 (I believe this is US size #8) 👌👍

@Chr.U.Cas2216 Жыл бұрын

👍👌👏

@Mobileblaster Жыл бұрын

👌👍😊

@carloshdz4172 Жыл бұрын

What kind of nozzle do you use?

@Mobileblaster Жыл бұрын

Xl 👍

@Class58001 Жыл бұрын

Mick what regulator you using to do ya paint gun with . Take it you using one of ya smaller ports on the compressor..

@Mobileblaster Жыл бұрын

No just huck it to the helmet pipe 👌👍 425cfm is a little over kill to run a spray gun tho 😂

@Class58001 Жыл бұрын

@@Mobileblaster 😂.. never enough of the cfm's.... mines regulated entering the stand up filter housing.. so I could just hook up to tht same as you.. I use a water based rust inhibitor after I've blasted..

@Mobileblaster Жыл бұрын

@Chris Bennington were you get that from n how much ad like a few gallon sat in van for a rainy day 😂

@Class58001 Жыл бұрын

@@Mobileblaster Mick it's water based so environmentally friendly same as rain 😂😂😂😂... The product I use is called ferrozinc.. it's like a white wash but soaks into any pours in the steel and creates a rust inhibitor.. then if ya Wana be extra professional u can then apply a cold zinc undercoat over the top.. any good high zinc oxide paint will make the job good base to apply a top coat or blacking.

@Mobileblaster Жыл бұрын

@Chris Bennington I want to find a rust inhibitor that's water based that will hold flash rusting back for 12 to 48 hour so if im doing something metal outdoors and it rains I want the opportunity to fly over with a inhibitor so it doesn't spoil the job 👌

@darrencarwardine3230 Жыл бұрын

Fascinating as usual Mick..... How on earth do u quote for something like that 🥺..... And how much medium do u know to take?..... Great content keep it going 💪

@Mobileblaster Жыл бұрын

All from experience mate not much I haven't blasted before 🙂 taking abit to adjust for extra derv and media the bigger compressor uses but I'm dialing it in prity well now 👌

@andregeseron1872 4 ай бұрын

What kind of abrasive are you using and at what PSI?

@Mobileblaster 4 ай бұрын

I believe I was using glass at 125psi 👍

@andregeseron1872 4 ай бұрын

great. Thank you for getting back to me. @@Mobileblaster

@michaelspon Жыл бұрын

How many hours to complete? Thanks!

@Mobileblaster Жыл бұрын

Blast and prime less than a day👍

@yorblastshotblastcleaning1688 Жыл бұрын

do you get much trouble with that electric dead man?

@Mobileblaster Жыл бұрын

Just the button mate I've yet to find a cheap alternative that's reliable I don't want to pay £175 for another from clemco button is £65 but I've to import it from US then al have import tax etc so could end up costing more than I want to spend 😂

@roydawson4882 Жыл бұрын

Mick jet skis have a dead man on em that might adapt for wot you need😊

@Mobileblaster Жыл бұрын

@roy dawson do you have a link please?

@Unit-89 5 ай бұрын

id love to be your apprentice, let me know if you ever need one

@Mobileblaster 5 ай бұрын

Not at the moment 👍👌

@yellowmr1 Жыл бұрын

Is that a painters hood in 9.25 ?

@yellowmr1 Жыл бұрын

Also what type of paint are you using?

@Mobileblaster Жыл бұрын

It's a swet sock I usually use my hoodie but it was a little too hot to use it just saves washing the helmet as much 👍

@Mobileblaster Жыл бұрын

@mr yellow it was primer red oxide we didn't quite have enough but it was getting a DTM paint top coat anyways with this top coat they say it can be used direct to metal no primer but I always think its a good idea to skin it up 1st

@yellowmr1 Жыл бұрын

@@Mobileblaster cheers for the reply!! where do you buy them please?

@Mobileblaster Жыл бұрын

@mr yellow not sure my mate sent me some to try and to be fair they are prity good al as him for a link 👍

@user-wb7ff5rh2o 9 ай бұрын

Я специалист по этой работе ищу работу

@Mobileblaster 9 ай бұрын

Unfortunately I'm not setting on at the moment

@chriseccles1454 Жыл бұрын

🎉🎉🎉Painter Man Painter Man who wannabe a painter man😅

@Mobileblaster Жыл бұрын

I normally stay well clear of painting I don't really enjoy it 😏

@chriseccles1454 Жыл бұрын

@@Mobileblaster It was a reference to the old Boney M hit 😂😂😆 was interesting to see that painted area seems easier and cleaner finish. Did you get on top ok or just a pain.

@Mobileblaster Жыл бұрын

@@chriseccles1454 I did the top blast and paint but the lack of scaffolding etc is the reason I kept it off youtube 😏

@johnholness1470 Жыл бұрын

@@Mobileblaster elf&safety,them 2 bastards get everywhere these days

@Mobileblaster Жыл бұрын

@John Holness If someone spotted something wrong I've to explain my actions and to be fair I would rather not upload at all than try and explain my actions its easier not to show it 😂

@jdaspects Жыл бұрын

shit hurts my ears just listening on KZfaq

@Mobileblaster Жыл бұрын

😂 and you have to option of the mute button 😂 alot of folk say I use too much music and they want to listen to the blaster so I tried to do a mix of both 👌👍