Very, very good camera work which made the “instructions” exceptionally clear. Thank you!

You sir must be an engineer. I have watched just about every video there is and I have built a couple of tanks but you make me feel lacking. This is hands-down the best video ever made on electrolysis cleaning. Thank you very much for this.

If anyone watches this and thinks they don't have time for that......You don't have to do 95% of this. Just put your sacrificial steel in the water, put your piece you need cleaned in the water, add washing soda, hook up a battery charger, done

Going to use this method to clean a rusty intake manifold. Thanks for the video!!

This has got to be the most professional home electrolysis project out there. So much care to get everything neat and tidy. This is one of those set ups that you don't dismantle, just put aside until the next project comes along. Brilliant.

EXCELLENT QUALITY VIDEO. BEST I'VE EVER SEEN, AND I HAVE LOOKED AT MANY. THANK YOU.

the video is great mister, it's very useful to be able to increase knowledge!

Excellent and I liked the sound of the proper clock

Thank you for the simple video

Thank you for your effort to share this. Well done

Really nice setup! Well thought out!

Great video. Tools live a tough life and even they diserve some spa-time.

You put some effort into making that tank, it's people like you who would do a proper job at everything you do (like DIY repairs). Great video thanks.

Super efficace belle vidéo .

Awesome videography.👍👍

Bloody Excellent👋

Excelente, a buen entendedor pocas palabras.

thank you

Amazing...

Aside from the serious over-kill on the design -- cool! A bucket and one rod or flat plate is all you need.

Rinse with distilled water and that will prevent flash rusting before you have a chance to coat it

Good Job! Time to go buy some rebar.....

Good video. I have had great results using Aluminum Sulphate in the solution instead of Sodium Carbonate.

I'm just building mine and this video is extremely detailed and helpful... I'm curious, what connectors are you using for the copper wire?

WOW!

The video is great, thanks for making it. May I ask where you got those connector terminals?

Nice job, only a 2 inch drain valve would be great to see on this project.

Καλησπέρα απο Ελλάδα αδελφε κ χρονιά πολλά

@ 2:57 Greek flag. Έλα ρε πατρίδα ! 😉

What kind of connectors were the wires ran into?

Great video! Thank you for sharing! Do you think I can use a dead battery as a bridge to electrolysis from a charger?

just a quicky - learned from personal experience - when doing this with heavy parts over say 2 kg be very careful that the wires / clips supporting the parts do not snap or unwind or you do not acidentally drop the part when lifting in / out of the tank because if they drop and crack/ hole the tank you've got a LOT of filthy electrolysis solution flooding out... AND it will stain IF it's the fluid at the end of the process!! I used a thicker grade of plastic tub and it still punched a hole through when I dropped a car brake caliper from just above the fluid level... I may have uttered some colourful language as i tried to shift the tank out of the garage

Really enjoyed watching this video. Today, I came across several cast iron skillets and a dutch oven that were left on a basement floor for years. Very heavily rusted and looking to learn how to do this process. Most likely, will I have to repeat the e-tank or should it work with a single application? Any other advice is greatly appreciated.

Πολύ καλό

Outstanding video, however, what is the parts list?

how do you dispose the water?

wait a minute..... ear muffs, and respirator, but NO safety glasses when running the chop saw ? bro, that's the most important piece of PPE

Just did my first one! Thank you so much. I’m so excited to see the finished project. What would you recommend for an antique toaster after it’s done with the electrolysis? I’m thinking about nickel plating it.

In North America, the powder you added to the water, is commonly known as "Washing Soda" and can be bought at most grocery stores.

Great job , I was wondering if I had 8 rebar instead of 6 . Would it make it stronger ? Thanks

I'm going to use the cage from an old shopping cart for my Androids hopefully the cage will provide a greater area for the rust to adhere to and the part will be able to have a greater area to disperse the rust from leaving the part more evenly cleaned and saving me the trouble of turning the part in different directions giving me a more uniform part upon completion.

Nice method, but the wrench was almost with no rust, you should choose something more rusty

Question: Does electrolysis leave the metal etched and ready for painting?

A really good demonstration. So much better than my wife's dishwasher! (Joke ).

Odd question...could you use this process to remove rust from the cargo area of a K5 blazer if you built the "tank" with the floor of the tank being the cargo area of the K5? Hook up the negative to that and have the anode hanging in the solution not touching. Would that work?

Ειναι κατι που χρειαζεται να το εχουμε στο εργαστηριο μας Μιχαλη,το εχω κανει και εγω και μου εχει λυσει τα χερια,ειδικα στα μεγαλα κομματια μεταλου η σε πολλα κομματια μαζι, βολευει πολυ,αντε παμε για το επομενο,μερες τωρα σκεφτομαι μια καμπινα αμμοβολης !!!! Ευγε Μιχαλη.

You did not mention the fact that the parts will quickly flash rust if not cleaned and coated after the electrolysis process is used. Some folks use just a mixture of water mixed with Dawn dishwashing soap to clean and prevent the flash rusting after the parts are removed from the electrolysis bath, but if you do not coat them to prevent flash rusting afterwards, it will indeed happen. Been using this process for years on my vintage car parts. You can safely dispose of the old electrolysis bath water by pouring it onto a flower bed, but supposedly not into a vegetable garden where it can leach into the edible plants there. I have used all sorts of amperage variations with no real notable difference in making the process work better or hampering it in any manner. I like the connectors you used, as I just got a set of them a month back and haven't used any, yet. Nice video. If you have even larger materials to de-rust by this product, I have had success with fenders and such large items by utilizing a cheap plastic kiddy pool. Same set up as your smaller unit but beware of any sharp edges that may puncture the plastic pool and spill out the contents everywhere. I had that happen with a 1942 Chevy business coupe fender when the sharp edge on it accidentally got pushed and it broke out the plastic pool side and we had a real mess to clean up afterwards. I have a 1925 Ford Runabout roadster which I will be using this process on soon. Keep it all away from pets or animals for safety's sake and keep it out in the open to prevent fumes being any issue. Much cheaper than the use of Evapo-Rust or other products and does a better job most often, too. Thanks for sharing the video.

Do you have a link to the connectors that you used and just what they are called? Thanks.

What's the brand of charger that you used? (What amperage range, ect.)

Can you just use a 12v font like used to power cameras and stuff? And this water mix how many times you can use it or just once and the effect stops? Because i have a big restauration in mind. This would be very nice to use for all rusty parts

Greek flag? Nice.

How did you get to 96 litres?

is all that solution used now or can it be used again. seems like a large footprint for one tool. nice job

Hi, can I use threaded rods as anodes which are already coated with electro-galvanising, or all anodes have to be raw steel without any coating? Thank you.

I made one of these but I actually used an acid for the liquid. I need to make another and I like the sodium carbonate better.. I like what you have done. I have 3 questions. What are the white wire connectors called, how long is this solution good for and do you need to keep adding sodium carbonate to the mix every time you use ? Thanks..

nice video What's the dimension of the wire? This is a tank from IKEA, you don have to calculate the volume, it is stamped on the underside Greetings from Austria

That much water in that container weighs over 200 lbs. Hope that container handle the weight; my cheap containers of the same size are quite fragile when loaded. If you have carbon anodes available, you'll get less sludge and stuff in the solution. See the videos by ShopdogSam on this subject. Great technique in wiring it up and sharing the amount of Sodium carbonate to use per gallon. Sodium carbonate(Washing Soda in the grocery stores) is much better for this process than Sodium BiCarbonate (Baking Soda).

Μπράβο, πολύ καλή! Η σόδα είναι κοινή μαγειρική και θέλει προσθήκη κάθε φορά που χρησιμοποιείται ή μία φορά στην αρχή;

Excellent presentation & information!! How can you make a smaller unit? Just make it all littler? And if you make one so large for such small tools, then can the bath be reused? Thank you sir!

Nice video ! How many times can you reuse the water mix ?

Is that copper or just regular wire? Can I use any wire ro wire the rebar?

Πολύ καλό και κατατοπιστικό μαγνητοσκόπημα. Εύγε!! Πάρ' αυτά αισθάνομαι την ανάγκη να παραθέσω μία απορία, την εξής: Εάν χρησιμοποιούσαμε ως αγωγό, αντί για Ανθρακικό Νάτριο, Υδροξείδιο του Καλίου, κοινώς Καυστική Ποτάσα, δεν θα είχαμε πιο δραστικό όπως και ταχύτερο αποτέλεσμα;;;Ευχαριστώ ευχόμενος τα καλύτερα.

Hi your video is very awesome. I'm using the same charger you have, an ultimate speed but I think the model is newer (2021 if i don't mistake). Yours is a smart charger right? Because mine has a problem that when I start it sometimes it gives me an error and does not start while other times the current is not constant and pulses and restarts continuously. The only way to get this to work is that I'm using a vice on the button so it keeps restarting and not stopping but so it lasts an eternity. Would you have any solution? Thanks for your attention and have a nice day.

Γειά σου πατρίδα! Ωραίος. Θέλω να το φτιάξω για να ξεσκουριασω βαρίδια παλιάς ζυγαριάς. Θα χρειαστώ ενισχυμένο δοχείο γιατί έχω από κιλό μέχρι 20κιλο.

Q. I have a DC powersource that I can dial in up to 24 volts, but only one amp. Will 12 volt work at one amp? I'm sorry if a dumb question.

You could just use 1 wire to connect them all together instead of cut join etc .. just strip wire twist put into Lego connector then screw .. 😉😉 .. time saving

Tried two different battery chargers, nothing. They kept saying the battery cables were connected with the wrong polarity. Then I tried a 12v bench power supply which worked for a few minutes and then would shut down, seemed like it overheated. Forth attempt, the power supply popped and is now dead. I have double and triple checked that the tank was built correctly and nothing but water was touching the anodes. No shorts. Positive connected to the anodes and negative connected to the rusty metal parts.

What do you coat it with once complete?

sandblast with aluminum oxide

Hello, excellent video, I am very impressed. As I would like to make a similar one, can you please tell me why 6 anode rods instead of 1, does this make it more effective? Would really appreciate a reply.

That wrench looked new even before it went into the tank.

Does anyone know (when he cuts the rebar) what brand or info on the chop?saw? Please.. 😊

can you use steel tube

can you make one that can do plating ? like silver plating? gold plating ?

What’s the voltage applied to the system? Thanks!

Do you think you could used galvanized metal for your anode???

❤🎉

Should have used red wire around the outside if it's connected to the + positive.. Nice video, can't believe there are so many comments about the type of connector block you use...??

what are those plastic connectors called

can we clean pc heatsink with this?

I have a 6amp automatic battery charger. Will that work for electrolysis?

what is the metal of the wire are you using to hold the pieces in the tank from the wood?

how would you clean a bunch of bolts

Where are you located?

Can we used sea water instead of table salt?

Did you use copper wire or steel wire?

The next thing to do after this treatment is to do home made black oxide to protect it.

What were the white wire connectors and who sold them?

Is washing soda is sodium carbonate?

Awesome build, but why does the name Rube Goldberg come to mind?

Can we add 5 rusted tools on negative lead or it need to be done one by one ?!

Where did you connect your power supply cable? Did you connect to home socket Where we plug our day to day life utility like TV?

🇵🇱 👍

What diameter is the rebar

What do you mean the electrolysis will regulate itself. If you do not disconnect power it will keep on produnlcing ooh

hello, can i use a steel container instead of plastic, does it work on cast iron also?

Sir can i use 3 amp laptop charger for this prosess ?

Can you do this with a smart charger ?

τι μπαρες χρησιμοποιήστε για τα ανοδια

What are the white connectors called?