Rust Solutions You Need to Know About from Eastwood

No video

Rust Solutions You Need to Know About from Eastwood - with Kevin Tetz

Рет қаралды 144,404

8 жыл бұрын

In this video, which originally aired Live in October 2015, Kevin Tetz shows you all the methods of removing and preventing rust that will help you when you're restoring your car or truck.
Check Out Rust Solutions Here: www.eastwood.com/paints/rust-s...
Rust can be removed chemically and mechanically. Eastwood offers chemicals like Fast Etch that will remove rust. Fast Etch is great for removing pitted rust. You can also use an abrasive blaster - and Eastwood offers many types of blasters and blasting media. Blasters are also good at removing rust from pits. You can also use wire wheels, wire brushes, sanding discs and stripping discs - all available at Eastwood. Eastwood even offers Internal Frame Coating - which is great for coating the inside of frames, doors and rocker panels.
Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle. Welders, rust solutions, paint and paint guns, plasma cutters, metal fab tools, hand tools, specialty equipment, soda and abrasive blasters and more!

Пікірлер: 60

@My1969chevelle 7 жыл бұрын

Thanks Eastwood, and thanks for opening a store in Parma Ohio, I'm going there today for advice for my chevelle frame.

@jojodiver8706 6 жыл бұрын

I just use a garden sprayer with ATF and bar and chain oil mix in it, connected to a piece of aquarium tube with the end plugged with a piece of dowel rod and four holes drilled just before the dowel plug. Shove it throughout your frame and spray away. Works great.

@stevefritsch3543 Жыл бұрын

This guy (actor) is a great product rep. Eastwood should sign him up or give him a raise

@john197039 8 жыл бұрын

This video is a great resource.

@N3RFTHIS 8 жыл бұрын

I have the old Paintucation video set. Would love to see some updated ones.

@ReloadingRADIO 8 жыл бұрын

Can you show us what your talking about with the flange repair. Should It be spot welded or hole punch and spot welded through. Or use some kind of panel adhesive and hold that in place with tech screws. Or is butting the panels up next to one another the better repair. Maybe just examples of when to use a flange and where not to flange

@shinecustomstravisswedziak8814 8 жыл бұрын

Can you use fast etch on random metal spots that have been sanded through when you block the hi build primer? will the fast etch ever hurt the epoxy base layer or the polyester or high build primer? just curious as we have all had spots where we sanded through the primer while blocking and it sits in bare steel spots for a few days before touching up with epoxy then another coat of high build. obviously i can sand these small spots to be sure i was just checking on the product info

@edreiss3637 4 жыл бұрын

I am a old school mechanic. One thing I can tell you is that die grinder will destroy your ears. Dont forget to throw in the safety side of things like Norm Abrams use to do.

@johnwilsoniii5247 7 жыл бұрын

Can you utilize this process for Under carriage rust?

@jedibarracuda8412 7 жыл бұрын

can this product be used on new frame rails with ecoat on them?

@stevefritsch3543 Жыл бұрын

Does Eastwood have a internal frame tool to loosen the flakey stuff before I use the internal frame coating?

@61spindrift 4 жыл бұрын

This video's is taking so long I am starting to rust.

@clyoul3ss819 3 жыл бұрын

maybe it's your crusty BAAAAALLS. Quit your moaning.

@pmp2559 3 жыл бұрын

You just need to be sprayed with fast etch or rust dissolver

@robegerton2497 8 жыл бұрын

First off I love the videos and Eastwood but there is some conflicting information with the encapsualters and rust converter applications if you watch all the videos. I want to do my frame once a do it right without seeing it rusting in a year or two.Is just wire brushing, pre or a grease remover then doing the encapsulator then chassis black extreem good enough or do I have to do the rust converter first?

@eastwoodco 8 жыл бұрын

+Rob Egerton Try to remove as much of the rust as possible, including in any pits. This can be done with abrasive discs, wire brushes, chemicals or by blasting. If you have it stripped completely to bare metal, you can apply epoxy primer. If there is still some rust, apply Eastwood Rust Encapsulator. If the rust was only in the pits when you sprayed the Rust Encapsulator, you can then sand the frame, leaving bare metal exposed and the Rust Encapsulator still coating the problem areas in the pits. To discuss your car in detail with an Eastwood Tech, call 866.759.2131. Thanks.

@johnbarnette3916 7 жыл бұрын

when you guys coming to ga?

@dustinkinser3797 6 жыл бұрын

I have a question for u guys. Im working on a 1977 Lincoln continental. I will be doing a full frame off restoration. Should i treat the rust on the fenders to stop the damage. Till i patch the hole. Or wait till i patch the hole?

@eastwoodco 6 жыл бұрын

If you're not starting soon, you can treat the rust so it doesn't get worse until you're able to patch the area. Check out our new Rust Encapsulator Platinum that provides 3x the protection of original encapsulator and demolishes the competition: www.eastwood.com/eastwood-rust-encapsulator-platinum.html

@jmkgbs1 7 жыл бұрын

17:50 what disc are you using?

@badad0166 8 жыл бұрын

The frame tube spray thingy needs a pinwheel at the end to disperse the coating outward. What I witnessed was a bit of a fail. Let me know where I can collect my royalties for this industry changing idea of mine. I will take payment in Fast Etch and Prep Spray.

@eastwoodco 8 жыл бұрын

It sprays out in a fan pattern. Check out this video: kzfaq.info/get/bejne/grR5ls92ndK6noE.html

@Ryan-yi6su 2 ай бұрын

Do you recommend rust converters With the tannic acid and polymers

@eastwoodco 2 ай бұрын

Which solution you go with depends on the project/problem you're trying to overcome. Fast Etch is great for light surface/flash rust, converter is good for deeper frame rust as well as rust encapsulator for sealing off and giving you a nice paintable surface.

@sofakingphat8087 3 жыл бұрын

At 33 minutes and he mentions that a black coating is left behind that is called magnesium phosphate not zinc phosphate. Zinc phosphate will leave it nickel colored coding. Magnesium phosphate is called Parkerized

@LionHeart0808 5 жыл бұрын

Does anyone have any tips on how to take off just the first layer of paint off and not the original paint underneath? I have a truck that has been poorly painted over the original paint job and the original paint job had original lettering on the doors that I would like to get to so I can restore the truck with original paint color, scheme, and lettering.

@mikaelgaiason688 5 жыл бұрын

Very fine paper and a very soft touch. Good luck with that...

@danjohnson6292 8 жыл бұрын

I want Kevin and his buddies to help me with my project.... Dan

@skylerguerette8791 8 жыл бұрын

What happens if you don't remove the fast etch completely and try to paint it. My truck frame is only starting to show the slightest signs of rust and I am thinking of using fast etch to remove the rust, then spraying and anti-rust primer to prevent further rusting. Finally I would add a rubberized undercoat on top to protect from chipping. Is there anything wrong with this method? Any suggestions?

@eastwoodco 8 жыл бұрын

+skyler guerette You want to remove all of the Fast Etch before painting. Have you looked into Eastwood Rust Encapsulator? We also offer Rubberized Rust Encapsulator. If you want to discuss your project with an Eastwood Tech who can make sure you get the right product to do the job right, please call 866.759.2131.

@skylerguerette8791 8 жыл бұрын

+Eastwood Company Would hosing down the fast etch with water work or do you need a special cleaner?

@MrFreeze79 5 жыл бұрын

anyone watch the paintucation dvd ? I think it's a 90's production, really entertaining

@eastwoodco 5 жыл бұрын

Here they are. Kevin recently made a new video on painting a truck: www.eastwood.com/paintucation-6-dvd-set.html

@gloidl 8 жыл бұрын

Can you repost in higher quality and correct aspect ratio?

@eastwoodco 8 жыл бұрын

+gloidl It's a download of a live video from a different site and there was an issue when it was recorded. This is the first time we had this problem and we're working to avoid it in the future.

@badad0166 8 жыл бұрын

Well at least get your camera workers to tilt down. We get it. You are short. Get over it. (smiley face thingy).

@markhelms2287 8 жыл бұрын

I enjoy these how-to videos from Kevin very much but what happened to your video quality???

@TravisInCanada1 8 жыл бұрын

+Mark Helms I think the quality is lower because it was originally a live stream.

@markhelms2287 8 жыл бұрын

+Travis In Canada Their other live-stream videos have been much better though.

@TheMarcusGomez 8 жыл бұрын

+Travis In Canada yea other live streams have been higher resolution.

@eastwoodco 8 жыл бұрын

+Mark Helms It's a download of a live video from a different site and there was an issue when it was recorded. This is the first time we had this problem and we're working to avoid it in the future.

@markhelms2287 8 жыл бұрын

+Eastwood Company Thanks for the response. Still plenty of good info here. It just makes it hard to see some of the details being pointed out.

@derekcarr1442 7 жыл бұрын

Is kevin tetz still with eastwood

@robs1852 6 жыл бұрын

Wondering the same thing, where has Keven Titz been lately

@rdiehl7809 3 жыл бұрын

Think you may be out of focus. Can't read any of your products names on the containers.

@1Independentrider 8 жыл бұрын

You'd think Eastwood could afford a high def camera.

@eastwoodco 8 жыл бұрын

+1Independentrider It's a download of a live video from a different site and there was an issue when it was recorded. This is the first time we had this problem and we're working to avoid it in the future.

@mikaelgaiason688 5 жыл бұрын

Not only ferrous metals oxidize. Aluminum comes to mind... Edit: Posted that about 45 seconds too prematurely. lol

@theSword- 8 жыл бұрын

Exactly, I have tried to tell so many people for years, Aluminum CAN rust. It's just a different metal. All types of rust are simply corrosion. Thanks for saying it out loud.

@TheJos44 6 жыл бұрын

if aluminum is attached to a different type of metal I've seen the aluminum disintegrate

@rokguitarstar 4 жыл бұрын

Stuff settles in the can...………...

@steveneumeyer7926 6 жыл бұрын

If no one is going to the er the job isn't being done right

@yoblob34 6 жыл бұрын

Definitely blurry looks like a video from 1980s. Camera guy Steve needs to get his prescription renewed on his glasses.

@domdegood5376 6 жыл бұрын

Coca Cola gets rid of rust :)

@joelbell9082 2 жыл бұрын

You should spend some time educating your employees they don't even know what the hell you're selling when you ask them a question

@TheJos44 6 жыл бұрын

Tetz or Teets?

@eastwoodco 6 жыл бұрын

Pronounced Tates.

@ahatchett 3 жыл бұрын

This video was filmed on a potato

@alsoprano3219 3 жыл бұрын

My God give it a break we all know what rust is get to the freaking point and say what needs to take care of to take care of your problems and been away with it we don't need to go through all your freaking life get a grip

@vapeking8882 4 жыл бұрын

sorry but you said the dumbest thing iv ever heard in my life plastic dose not rust plastic can be out side for 100's of yrs with no damage of any kind if its not in the sun its the uv light that dose this not the rust form of oxidation from water and air reactions.