Rustoleum Motospray Wagon Part-3 (Carnage Plus EP62)

Рет қаралды 27,163

4 жыл бұрын

This time we head to Scotty's Garage to make some more progress on the Rustoluem Motospray Wagon.
Subscribe to Street Machine for V8-powered good times goo.gl/DTXEnl
Street Machine is Australia’s number-one modified car magazine, bringing V8-powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos.
Street Machine | www.whichcar.com.au/streetmac...
Facebook | streetmachinemagazine
Twitter | / streetmachine1
Instagram | / streetmachinemag
Google+ | plus.google.com/+streetmachin...
Pinterest | / streetmachine1
Get the mag | goo.gl/CcukDF
Read on Newsstand iOS | goo.gl/QzSTgH
Read on Zinio | goo.gl/mbiqKr
Read on Magzter | goo.gl/AdF42f
Join the conversation: #streetmachinemag

Пікірлер: 123

@lillycollingwood1015 4 жыл бұрын

Favourite project

@geneva760 4 жыл бұрын

Rain on the roof sounds nice. Have a nice day all. CHEERS from AUSTRALIA.

@dazaspc 4 жыл бұрын

Top Tip for the rattle can painters out there. When it is cold it can take ages to get the paint to mix in the can properly and it wont spray well. 1/2 an hour before painting put your paint cans into a bucket/bath of warm water and give them a chance to warm the paint a bit. It really helps it mix when shaking it up and if you are using a fill type of primer it will help prevent the can from getting clogged up. If it is a colour top coat it will save you shaking for so long to ensure it will be consistent for the entire can. If the temp is under 20 c it helps a lot. Another tip if the paint is thick out of the rattle can when you are finished for the session and there is still paint left in the can you turn it upside down and give them a short burst of spray to clear the nozzle and valve assembly in the spray can so next time it is clear and will spray properly. This job takes me back to the 80's welding up rust and using rattle cans to fix a Valiant...

@STREETMACHINETV 4 жыл бұрын

Thanks for the tips

@ReinventingTheSteve 4 жыл бұрын

You're right Dazza... alot of people don't understand the science!

@sheridangreen9857 4 жыл бұрын

I normally boil a kettle I have in the shed just for doing this and I put the can in for roughly 30seconds and I am good to go

@T1000AX 4 жыл бұрын

great work scotty

@mrgtsx 4 жыл бұрын

Awesome video Scotty keep up the great work

@bobbyoz8251 4 жыл бұрын

Good job Scotty

@tongoio 4 жыл бұрын

Thanks Scotty just did exactly the same floor patch on my VE. Had to repair the seat bracket and inner sill wall underneath as well. Took me all day and came out looking just as bad as yours did and I'm proud as!

@andrewbax6761 4 жыл бұрын

Working at home is always a challenge everything takes 5 times as long but it's a good skill to have making do with what you have available 😀

@jewelsheyyou8796 4 жыл бұрын

Nice dance

@andrewtaylor9615 4 жыл бұрын

I like it when the build comes in less then $10k. Love it when it's less then $5k and basic home shed and tools are used. I didn't have a shed (to fit the car in) for my first two engines and one gearbox tear downs. Keep it real Scot.

@lukeya1983 4 жыл бұрын

Cannot wait to see the wagon finished Great vids mate

@LRogan520 4 жыл бұрын

Nice work Scotty, those welds looked OK to me, especially as nobody will ever see it, you've achieved more there, than playing warzone!

@STREETMACHINETV 4 жыл бұрын

But I like Warzone :)

@LRogan520 4 жыл бұрын

@@STREETMACHINETV haha same here but takes up valuable time..

@theoriginalwallace 4 жыл бұрын

Just thought af a memory about screaming past a minibus in my 1970 Mini in 2004... about 30kms later stopped at Maccy Ds near Dundee in Scotland, I was confronted by some super friendly Aussies from said minibus who asked what the hell was powering the thing! I happily obliged in removing the bonnet showing the big block 250 bhp XE 16v 2.0 powerplant (Holden/ Vauxhall/ Opel with lsd gearbox & weighing 560kgs wet)! Which then got the reply: the only thing that comes in 2ltr in OZ is milk & juice!!! I apparently had awoken one of the guys from his sleep who thought it was a loud bike only to be told it was a Mini!! I was doing 140 mph at the time... on a private road obviously 😉

@mmillsom 4 жыл бұрын

You're an inspiration Scotty. Keep up the good work.

@ants3503 4 жыл бұрын

Love ya work

@mickmarrett9284 4 жыл бұрын

👍 good job. But next time instead of cutting out a square cut it right to the edge of the panel. That way there is less welding’ less grinding and less heat.

@theoriginalwallace 4 жыл бұрын

2020 has not only kicked OZ in the nuts, but twisted them off to boot, Scotty. I'm still on the Cossie Viva... firewalling etc. It's keeping me sane doing this and the bonus side of UK lockdown is that I've managed to get a whole years worth of spare time work done in a few weeks! Keep safe buddy & look after your boy & the family. Much love from Leigh & Rachel.

@christophergill375 4 жыл бұрын

nice work Scotty ! , nothing worse than welding that thin stuff but brass works so much better to use as a backing to stop it blowing through, also are you running .6 wire? .9 sux for old panels

@martingidaszewski7342 4 жыл бұрын

This is my favourite build series you’re doing Scotty because of the significance to you. Keep up the good work mate 👍🏼

@MafiaboysWorld 4 жыл бұрын

Scotty's Garage IS BACK...for a limited time only. 😁👍 Lockdown didn't get to us, but it did get to my parts that were supposed to arrive. If I don't see these turbos for Crustida soon I'm gonna lose it. Also, I felt like I broke every injector clip when removing it, the click noises make me just 😬 everytime. 😂

@gavinb9627 4 жыл бұрын

Old shit just sucks sometimes

@paulcampbell6481 4 жыл бұрын

Thanks Scotty, enjoying the series and your honesty

@deancooper6300 4 жыл бұрын

You definetly lucked out getting such a good floorpan! Original metal stampings are always better than repo stuff. Having said that it must have been a bastard to get out, hundreds of bloody spot welds!!😳

@STREETMACHINETV 4 жыл бұрын

Well worth the $250 i paid for it

@damienbrundle166 4 жыл бұрын

Love shakin dancin moves there scotty!!! Just remind us to get you painting near a pole..... somethings we should never see

@deankdx 4 жыл бұрын

surprising how long it takes to do these small rust repairs, probably a couple of hours easy.(even more surprising is how long it takes to begin.. getting supplies, stripping the car down, covering any glass, finding the fire extinguisher, where's my safety glasses i just had.. oh, on My head still..)

@Tony-112 4 жыл бұрын

That's why it cost a lot to get it done at a shop👍

@Mayhemspent 4 жыл бұрын

With the way Scotty uses that grinder, so that it kicks towards him if it grabs, is one of many reasons the shows called Carnage. HAHA Lovin the wagon series. Cheers boys.

@ReinventingTheSteve 4 жыл бұрын

Fuck, metalwork is so quick and dodgy when you're a corrosion prevention specialist 😂... have fun with that rust 😊

@sourwords1808 4 жыл бұрын

An honest work. Nothing hidden or lied about. Good on you bud.

@xozindustries7451 4 жыл бұрын

Nice job, on sheet metal I usually move around the panel so the heat isn't so isolated in one spot when I'm welding, that way it won't blow through as easy

@ashleypope3363 4 жыл бұрын

In all fairness its better welding than a certain "Road Perfomance Modifications" "professional" owners job on my old GTR Torana...

@LV-FOURTWENTYSIX 4 жыл бұрын

great work Scottie!, I've got a love for wagons so I'm really enjoying this series.

@davidmackieson4609 4 жыл бұрын

Would of used a weldable etch primer to begin with

@ThePonkster 4 жыл бұрын

Remember children "Grinder and Paint covers the welder you aint"

@GODEES77 4 жыл бұрын

Been waiting for the next ep of this one. Thanks Scotty

@craigdavies69 4 жыл бұрын

Nice job Scotty i recently used a 10 amp stick welder to do some patches, it was hell but got it done, i also have no vice and found wedging sheet metal in the bottom of a car door you dont care too much about and standing on it creates a nice profile bend.

@maniacvaliant 4 жыл бұрын

Hi Scott, are you able to drop a link of the paint you use and that Rustoleum Comfort Grip aerosol sprayer. Has Rustoleum got a link on their website to what you are using each episode? Go the Safari. Pushing me to get mine back on the road again. Keep up the Mopar work.

@STREETCARCULTURE 4 жыл бұрын

👌🏾

@jamesblanton9364 4 жыл бұрын

Hey big fella, thanks for another grouse installment of CARNAGE ! I'm really looking forward to the time when the racing starts for the budget build call out event with maf and haulass garage and others, could ya do us a favor please and see if you can entice Bubba Medlin into the comp as well, that'd be ace, make it a sorta mini drag meet of the budget cars. Look after yourself and cop ya next ep.

@MafiaboysWorld 4 жыл бұрын

Budget went WAY out the window on BOTH cars. 😉 I'm just trying to keep up with the five brinks trucks already thrown at Trolvo and the constantly moving goalposts. 🤷 If I get this build 100% done for under 20K total for everything, I'll be cheering. 😁👍 If I used a workshop, this build would be closer to 40-50K. 😬

@jamesblanton9364 4 жыл бұрын

@@MafiaboysWorld Hey Maf, how's it going mate ? $20 g's faaark'en, i hope you are cheering bro, good luck with it. How's you're build shaping up ? Good luck

@MafiaboysWorld 4 жыл бұрын

@@jamesblanton9364 You'll see soon. Trying to do multiple things with prepping for kid #2 and waiting for my final parts so progress has slowed.

@RyanMiller-ly4li 4 жыл бұрын

Those corded ryobi grinders are definitely for home use only. Used one at work and I killed it within two days, i cooked it that badly it was still smoking an hour later.😂

@MafiaboysWorld 4 жыл бұрын

That's why I said XU1 > Ryobi in my comment to Scotty. 😁 I've only cooked one sander and one hammer drill in 3 years of rust removal and each tool cost $20-25 to replace. 👍 Go the china spec tools. 🤘

@MmmMmm-vc8jz 4 жыл бұрын

Cut up a car and heaps with mine, lasted longer than the cordless jobbie did

@dragpix 4 жыл бұрын

I've got three of those cord ryobi grinders and all are that worn they are bearly green anymore let alone any branding left on it. if your beating on tools hard enough to let the magic smoke out in two days you need to look at altering your methods lol

@DarrenBoxhall 4 жыл бұрын

Hey man, not sure it was from editing,but don't use the rack cloth to wipe prepsol off. Use them after you have used a rag

@STREETMACHINETV 4 жыл бұрын

Yeah it's a good point. It was only floorpan thpugh so I wasn't too concerned

@DarrenBoxhall 4 жыл бұрын

Yeah mate no problem. I'm a painter. Prepsol it all, wipe dry with a lint free rag, then wipe over it with the tack rag to remove any crap

@tony66au 4 жыл бұрын

Noice work Scotty, I have that to look forward to if im lucky and it isnt too rusty and of course the Chassis rail gut, gusset and gronk..... Not saying a thing about your welding coz im back to using gasless lol

@jimclarke1108 4 жыл бұрын

You are doin well Scotty, clever guy all round ( dump the slant))

@tcpnetworks 4 жыл бұрын

Scotty and welding/fabricating - it's how world-class fuck ups happen...

@STREETMACHINETV 4 жыл бұрын

Coming from an IT dude, that means absolutely nothing :)

@anthonybollini3699 4 жыл бұрын

Just think once you roll down with that you can bring it to the States and we can cruise all over the place I can't wait

@paulcost6446 4 жыл бұрын

Actually i am about 29 klm from Scotty, think once body done should get it trucked yo my place, and it will become my problem what to do with it LOL

@xDarkVeilx 4 жыл бұрын

Scotty doing what he does best, carnage lol

@shanehurenkamp50 4 жыл бұрын

Scotty , for sheetmetal like that use a 0.6 Wire and turn the welder down.

@harryx6968 4 жыл бұрын

So the smaller the wire the better for sheet metal?

@joebaxter4235 4 жыл бұрын

8:00 "Flip it over, grind the backside, and flatten it out".

@LukeTheJoker 4 жыл бұрын

Scotty needs to work out a way to shake rattlecans with a shifter...

@joshfuller5917 4 жыл бұрын

Love your work scotty also love the goggles, ear muffs but no gloves 😂

@barra245t2 4 жыл бұрын

9:36 haha I thought you were about to bust out the haka..chur from n.z

@xsniperprox1 4 жыл бұрын

should probably keep some strong magnets in hand so u can just hold the metal in place with them.

@j06sh_w 3 жыл бұрын

Hey scotty, would that comfort grip fit on other spray cans, or just rustoleum?

@STREETMACHINETV 3 жыл бұрын

Pretty sure it fits most cans

@j06sh_w 3 жыл бұрын

@@STREETMACHINETV Ok sweet thanks

@bigdavedownunder 3 жыл бұрын

Why can I not find anyone who stocks rustoleum motorspray gear

@STREETMACHINETV 3 жыл бұрын

Because the product line has been discontinued

@janeblogs324 4 жыл бұрын

So why'd he pull the whole floor pan out???

@gavinb9627 4 жыл бұрын

I thought it was from another car, the original got bad tinworm

@leonardwalters154 4 жыл бұрын

Is the rust converter by rustoleum?

@STREETMACHINETV 4 жыл бұрын

Yes

@alexritter8899 4 жыл бұрын

Home shed build....! Dare you to finish the old girl off where it is Scotty!

@STREETMACHINETV 4 жыл бұрын

That would be a mission

@gavinb9627 4 жыл бұрын

@@STREETMACHINETV Well it would be in keeping with the brief, Doing it how us mortals would, in the shed with improvisation the key word. Test the products in real life situations. Think your self lucky you aren't using oxy to weld everything too. Keep yourself and the family safe, great job as ever

@joeschlotthauer840 4 жыл бұрын

The Coronavirus doesn't like the giant spiders of Australia...

@sourwords1808 4 жыл бұрын

@J.C. Kohle its a joke mate. Joke!

@decayingcorpse 4 жыл бұрын

Bah, they don't bite much. It's all good.

@poptartmcjelly7054 4 жыл бұрын

and don't forget the dropbears

@drbatfink 4 жыл бұрын

More jazz hands the better

@ohcamsrazor1966 4 жыл бұрын

Good patch job , and coz of its location, no one’s going to see it any way.

@lukeclarke9110 4 жыл бұрын

Only a shit tradesman blames his tools. Haha jokes mate just hanging shit on you,looks good love the video's keep them coming can't wait to see it finished.

@MmmMmm-vc8jz 4 жыл бұрын

That can dance, thought that was only saved to charm the ladies 😘

@olebrookswado7565 4 жыл бұрын

Loving the content Scotty. Mopar or any car!

@guypoole3444 4 жыл бұрын

There goes your clean floor...

@gavinb9627 4 жыл бұрын

Bunnings sell brooms too

@kizjay2730 4 жыл бұрын

You don’t need the carnage workshop, real street machines are built in the shed at home.

@STREETMACHINETV 4 жыл бұрын

True but it sure helps

@jamesforge8107 4 жыл бұрын

Well done. I noticed the hamming up of the can shaking. Was that in response to an earlier comment by someone? Please wear gloves when handling that floor pan though.

@JesusisJesus 4 жыл бұрын

In celebration, you should 2UZFE a Toyota Corona...

@joeschlotthauer840 4 жыл бұрын

11:50, you forgot your N-95 mask.... 12:56, shazzy rail....

@joeschlotthauer840 4 жыл бұрын

Rustoleum owes you money....

@someyoungguy6990 4 жыл бұрын

No fires, droughts, floods or shitty kung-flu is gonna stop us. It's all just a pimple on the arse of life for the average Aussie!!

@rustywrench500 4 жыл бұрын

With all the tragedies in the past few months makes a person wonder what's next.

@gazzgarage5412 4 жыл бұрын

Brought some rustoleum 2X paint and primer , where do u get the clip on spray handles from cheers

@peterbarber7613 4 жыл бұрын

crossrider 66.most auto parts shops have them

@fattypuds7395 4 жыл бұрын

Wtb Scotty COD stream

@MafiaboysWorld 4 жыл бұрын

Also wanted: Scotty's gamertag for squad matches. 😁👍

@andrewmurray6772 4 жыл бұрын

hey Scotty, if you didn't want to work on cars, you could always be a barman making cocktails ??

@mickholgate3347 4 жыл бұрын

Hahahahahaha.......Grinder and Paint, makes the welder I ain't! Look after yourself Scotty, looking very tired mate.

@gavinb9627 4 жыл бұрын

Too many early mornings playin Call of Duty we thinks

@jmyd83 4 жыл бұрын

👍🏻

@jaypap95 4 жыл бұрын

Whats your gamertag scotty? What are you playing on?

@STREETMACHINETV 4 жыл бұрын

PS4 Modern Warfare Warzone. ScottysGarage, I'm an average player. I go alright in Death Match but haven't won a Warzone Battle Royale yet, 2nd a bunch of times but I never quite manage the win

@jaypap95 4 жыл бұрын

@@STREETMACHINETV thats awesome ill drop you an add when im on next. So later today haha. Well try and get that W. Thanks for the reply man love your work giving a 24yo here lots of inspiration with my builds. See you on the battlefield

@michaelcarydakis790 4 жыл бұрын

your welding needs improvement ask a mate who is a pro i can help but i am in melbourne

@ReinventingTheSteve 4 жыл бұрын

Oy 1v1 me cod, I'll wreck u n0ob! 😛

@nightnope 4 жыл бұрын

sorry i had to skip along the video. still appreciate the crap tou of all the stuff you do here.. cheers.

@STREETMACHINETV 4 жыл бұрын

Not enough music?

@nightnope 4 жыл бұрын

Baby things. :/

@STREETMACHINETV 4 жыл бұрын

@@nightnope fair enough

@bunning63 4 жыл бұрын

Yeah meanwhile in NZ we went L4. Got to impress WHO and the UN if you want a job with them.

@Elxmo 4 жыл бұрын

@ChrisHallett83 I scrolled down "there's gotta be one dickhead" found 'em, bet he's lining up at KFC right now too.

@MafiaboysWorld 4 жыл бұрын

@ChrisHallett83 I get my fill of stupid morons on the NBC news channel. I even got a new ending for their national anthem Chris: *"For the land of the diseeaaaased, and the home of the...PLAAAAAAAAGUE."* 😂👍