No video
RV Water Damage Repair: Demo Day 13 Rear Reassembly
Рет қаралды 5,655
Күн бұрынFind the tools/supplies I use at www.amazon.com...
Book a consultation: www.fallenintocamping.com
Connect with me: linktr.ee/fall...
#rv #rvlife #rvrenovation #rvrepair #rvmaintenance #rvliving #rvtravel #rving #woodworking #woodworker #diy #howto #rvhacks #ac #acunit #rvaccessories #rvupgrades #heat #cooling
Disclaimer
Updated October 1, 2020
The information provided by Fallenintocamping LLC ("we," "us," or "our") on www.fallenintoc... or (
/ @fallenintocamping (the "Site") is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.
EXTERNAL LINKS DISCLAIMER
The Site may contain (or you may be sent through the Site) links to other websites or content belonging to or originating from third parties or links to websites and features in banners or other advertising. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us. WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.
AFFILIATES DISCLAIMER
The Site may contain links to affiliate websites, and we receive an affiliate commission for any purchases made by you on the affiliate website using such links. Our affiliates include the following:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn advertising fees by linking to Amazon.com and affiliated websites.
@pinkladybikermamma3603 Жыл бұрын
I LIKE HOW YOU LABEL THE VIDEOS
@bobkarstien1248 4 ай бұрын
Heather you make the repairs look so easy to do. Great video again.
@CDavidJensen-pb8eq Жыл бұрын
Great work. I love watching these videos!
@fallenintocamping Жыл бұрын
Love you, friend! Thanks for always supporting me 😭
@mikemiller8170 8 ай бұрын
Working alone makes for all kinds of innovations! When I hang outside FRP walls, I like to router the window out ahead of time. To hang it, I fasten a short piece of 2x4 to the underside of the top of the window frame on the trailer, making sure plenty of the 2x4 sticks out, making a small shelf of sorts. Then I can hang the FRP on that 2x4 and it holds the FRP while I fasten it to the trailer. Some trailers only have styrofoam framing the windows... in that case I'll frame it with wood or at least run a piece of wood along the top side of the frame to allow the temporary 2x4 'shelf' to be mounted.
@MkmeOrg Жыл бұрын
Coming along great. Appreciate the time you put in to these
@eBookHoarder Жыл бұрын
The window was satisfying. Subscribed.
@jessealvarado6939 Жыл бұрын
Love seeing your work you do a great job I wished you lived in California🤗 sending some love to you and your family😁🙏
@pouncepounce7417 Ай бұрын
Can so relate to rather end up in the ER than asking for ten minutes of help to hold something situation!
@fallenintocamping Ай бұрын
It’s a personal flaw, honestly 😂😂
@caseypries7559 3 ай бұрын
I get your reasoning for not applying silicon to the bottom of the marker light but on the front cap, especially one slanted like this one, there's a good chance that when driving in the rain that water will push up under it. I'd go ahead and seal the entire light. Also you might consider switching to Lexel. It's pretty much interchangeable with silicon and will stick to itself so you can touch it up later on.
@fallenintocamping 3 ай бұрын
The light has silicone behind it, so even if water got under it, it won’t matter because there’s silicone behind the light sealing the wires and hole. I’ve also had a terrible experience with lexel and don’t think I’ll ever use it again. I used it for a client trailer I was sealing, and within a day, i could peel it all off with my fingers. Never had that happen with regular silicone!
@caseypries7559 3 ай бұрын
@@fallenintocampingAny chance there was already some silicon there? Nothing sticks to silicon, including itself. So far my experience with Lexel has been pretty much identical to working with silicon. I have in certain instances cleaned the surface really well with acetone and or alcohol before application.
@fallenintocamping 3 ай бұрын
@@caseypries7559 no none at all. I cleaned the old silicone off, cleaned with alcohol and applied it. It was the worst experience ever and wasted 4 hours of my day 🤦♀️
@caseypries7559 3 ай бұрын
@@fallenintocamping well that's certainly strange. I've got multiple lights and an antenna on my cargo trailer, all sealed with it and it's stayed put.
@caseypries7559 3 ай бұрын
@@fallenintocamping Do you track your hours on these projects? Can you actually make money restoring these campers? I know folks do with airstreams but people tend to look at those differently.
@tyroneshaw3119 Ай бұрын
Love your videos. I have a 32 ft crossroads cruiser that I have started restoring. I follow your videos closely. My question is can I use R13 insulation instead of rv specific insulation?
@randalldillard8228 Жыл бұрын
Heat,shrink wire couplers
@user-vi2xp5xw8q 9 ай бұрын
What would you recommend on aluminum campers to reseal the windows
@krisg3984 Жыл бұрын
Did you use longer screws ?
@louispagac Жыл бұрын
Promo sm 😎