Excellent Video! I am glad i had all the tools you recommended they were definitely needed!
@78kitty5 ай бұрын
Great video! Camera work and explanation were excellent, just what I needed! Thumbs up, many thanks!
@tpp40076 ай бұрын
Like you said, those rubber coolant pipe are notorious for breaking after a while and the oil will just leak out and ruining the engine. Glad you got it done. Those Lexus at that generation is of good quality except for that one part. Glad you changed it to the metal!
@RandyBallard-qf3vzАй бұрын
This on my vehicle was only concern
@Stribman6 ай бұрын
they are dam tight , i had to cut a 12 mm deepwell in half to get one bolt and yes remove studs to onstall new one
@badchips105 ай бұрын
What size and length 12mm socket did you use for that bottom bolt on the stud on the right side? I just got a gearwrench 1/4 inch mid length socket set, but im not sure if the hole in the socket is large enough for top of the stud. Probably a 3 /8 mid length socket would have a large hole so it would not bottom out.
@SuburbanRanch5 ай бұрын
I can’t recall if it was 1/4 or 3/8 drive, I would recommend having both on hand!
@markwednesday43617 ай бұрын
good, concise, not too much talking, great. Whats the part number?
@SuburbanRanch7 ай бұрын
Sorry about that. Here it is. www.ebay.com/itm/203310597386?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eA7DYX_PTCq&sssrc=4429486&ssuid=Sp2kcc-2SwO&var=&widget_ver=artemis&media=COPY
@accobra42725 ай бұрын
@@SuburbanRanchdo you know if the 2013s RX350 had rubber hoses or were they upgraded from the factory?
@SuburbanRanch5 ай бұрын
@accobra4272 2013 should already have the metal lines. I believe 2012 was the first year with metal lines.
@accobra42725 ай бұрын
@@SuburbanRanch ok thank you!
@uabir83382 ай бұрын
THANK GOD! I recently got the 2012 and at least I don't have to worry about this @@SuburbanRanch
@craigsmith38569 ай бұрын
Have any videos on replacing motor and transmission mounts? 1992 k2500 5.7 4x4. Thanks
@SuburbanRanch9 ай бұрын
We don’t. Sorry.
@Hailie_FarmandYard26 күн бұрын
Where could I find new bolts for this part? The bolts I have are rusted and stripped
@SuburbanRanch25 күн бұрын
Any hardware store
@toupsclassroomtoupsclassro95573 ай бұрын
Question: how do you know that the protrusion on the gaskets face the pipes? can't find that anywhere else ty
@SuburbanRanch3 ай бұрын
I compared it to the original that I removed.
@toupsclassroomtoupsclassro95573 ай бұрын
Thanks I saw that too when i removed mine I used this : DICMIC Engine Oil Cooler Hose Line Lower Pipe Assembly from amazon got it used/new for 22 dollars had to bend a little but it worked ty for your knowledge
@connormorrison89762 ай бұрын
Will this drain all of the oil and i have to replace oil after install?
@SuburbanRanchАй бұрын
I did it during an oil change. I don’t think you would lose all of the oil, but you will certainly lose some and need to top it off.
@stormforge68Ай бұрын
What’s the Lexus part number for the metal replacement part? Thanks!
@SuburbanRanchАй бұрын
There’s a link to it in the video description.
@stormforge68Ай бұрын
@@SuburbanRanch 🙏
@devenhooe98692 ай бұрын
Any reason to not replace studs with bolts?
@SuburbanRanch2 ай бұрын
No need to!
@joshuapressley44414 күн бұрын
Does this affect the 2013 model year Lexus rx350
@SuburbanRanch2 күн бұрын
I think it was fixed by 2013
@RandyBallard-qf3vzАй бұрын
What is removing and replacing time
@SuburbanRanchАй бұрын
3hrs but we went kinda slow
@RandyBallard-qf3vzАй бұрын
Thanks
@Auxitoaffiliate9 ай бұрын
Afternoon Buddy! Interested in collaborating on some product review projects?😊
@SuburbanRanch9 ай бұрын
Sure, what do you have?
@Auxitoaffiliate9 ай бұрын
@@SuburbanRanch My name is Bill and I work for AUXITO. I'm currently the head of marketing. We were founded in 2016 and specialized in high performance LED bulbs for cars and trucks, We also offer automotive floor mats, aftermarket headlights, and lighting kits for certain models. email is?