Running RST in my 900whp 5.0 for 5 years. 46k miles later, still works. Can't do digs, because it slips, but rolls are fine, i shift at 7800rpm. Chatters since 50mile break in, i am used ti it already.

I’ve been following you since I bought my 04 cobra and have finally glad someone has talk about those clutches I have both both on my car and preferred the mantic over the mcload

You'll have to do a video once both are installed! Awesome vid.

The Mantic Kit is also rebuildable and can be upgraded from the twin to the triple disc and a quad disc if needed. The case is also only a $50 upcharge, Mantic does sell their kits in a box in white which is just like the mcleod packaging, but if I'm spending $1500+ on a clutch the case is a nice inclusion.

If i remember correctly, the difference between the RXT & the RXT 1200 is the HP & torque tolerances. The RXT is rated up to like 1000 HP vs 1200 for the RXT 1200. The RST, for any that care, is gonna have a more stock clutch feel to, & is great for street driving. It's also only rated for something like 600-800 hrsprs.

Love your attention to detail! Would love to get you on an episode of "between two clutches" on our channel.

Awesome info Chad. I'm looking at doing a clutch in my Cobra next year. Still waiting for the VMP & Fuel system install to be done but I have a feeling my stock clutch is going to be on borrowed time. I'll most likely go with the RXT 26 Spline and upgrade to the Magnum T56 trans.

On my 2016 gt350 I went with a rxt 1200 with my stock trans (kooks headers, id1050 injectors, 507whp on pump e85) I did a good bit of 2nd gear 50mph rolls in Mexico and after that my 3rd gear started to grind and wasn't happen with high rpm pulls its 50/50 that it will grind on me now. So soon I will do the t56 magnum xl upgrade. I'm looking into the mantic and maybe even the rps billet carbon twin disc. After this video for the money the McLeod looks like a good option to. Also wanna do carbon fiber drive shaft.

Chad, how's the Mantic holding up? I want to buy one for my Mustang GT (2021)

Have you come across any problems with clutch disengagement with aftermarket clutches? Especially clutches that are thicker or have a higher stack? Im having trouble with disengagement after installing a heavy body (500+hp) aftermarket clutch.

so i just had a mcleod rxt installed in my cobra mustang and i am 450 miles into the break in period. and about 3 days ago when i went to drive the car everytime i push the clutch in it makes a popping noise. even when not running. i jacked the car up and put my hand on the trans and you can feel the noise thru the trans.i called mcleod and they said something wasnt put in right.its going back to the trans shop tommorow but i just wanted to know if anyone else has had this problem.clutch works perfectly and shifts just fine

Mantic box game is on point. Mcleod's box is a basic bitch. It's the wink link lol

What would be the best clutch for a 800whp mustang. On a stock mt82