ryker rally jockey shifter for under $50

Рет қаралды 20,327

2 жыл бұрын

here's my cheap azz attempting and somewhat succeeding in hacking my way to upgrading my gear shifter to a jockey shifter. everything you see is obtained online and local store .
here are the parts.
1 . light clamp for motorcycle bull bar 1.25 inch diameter
2 . a rubber spacer
3. a pack of 10-32 1 1/2 inch bolt with washer and nut
4. motorcycle gear linkage. preferably short 170mm to 190mm
5. a drill to drill into the shifter
6. motorcycle shifter
7. 3/8 2.5inch bolt with washer and nut (get the lock nut)
note : i keep saying a hex nut instead of a hex bolt ...
ebay :
CNC Motorcycle Rearset Gear Shift Shifter Rod Linkage Fits For 170mm 180mm 190mm
amazon: www.amazon.com/gp/product/B08...
www.amazon.com/gp/product/B07...

Пікірлер: 27

@douglasmckay5968 3 ай бұрын

Hi I have all my parts and will start working on it today

@roguerebel2023 2 жыл бұрын

Very nice!

@ricktraceusa8624 Жыл бұрын

Very nice, good job

@markpage5567 2 жыл бұрын

Shorten your linkage and your throw will be shorter. You will need to play around with mounting locations again though.

@dannyrenna2659 2 жыл бұрын

Hey Ed how did the shifter come out did it work ? Do you have updated linkage size? and how the shifter work touching the side panel ?

@ericherring34 2 жыл бұрын

I know this is an older video but what size linkage did you end up going with?

@KrushKrills Жыл бұрын

Id make a suggestion to use stainless nuts/bolts, those zinc ones wont stay rust free for long

@xavierv.1207 Жыл бұрын

Also if you move that clam backwards and the shifter leaned forward you might get better results

@xavierv.1207 Жыл бұрын

What size bolt the is used to replace the excising short one at the shifter?

@madscionistsantiago Жыл бұрын

How did you fix the plastics from bulging out?

@eddiejimenez5114 2 жыл бұрын

Great vid. What size letters on your tires?

@TheSalbahes 2 жыл бұрын

thanks, the letters are 1 inch

@douglasmckay5968 5 ай бұрын

Hi possible you could give us a parts lst

@douglasmckay5968 5 ай бұрын

Hi what kind of clap is it

@cindybrouwer5060 11 ай бұрын

Do you have a list of the parts you used?

@scottgross5311 Жыл бұрын

I tried 170 mm and it's too short rubs the bottom panel way too much I'm gonna try a 190 next

@JuniorJr_23 2 жыл бұрын

Nice. I already spent $200 for a shifter...ugh.

@xavierv.1207 Жыл бұрын

Shorter linkage will fix it all

@shoncarter3730 2 жыл бұрын

I bought my Ryker used so it already has one but I would have copied what's already on the market. You're good as long as you don't try to put it on the market.