Ryzen 5 5500 + MSI PRO B550M-VC + RX 5700 + BITFENIX NOVA MESH M | Step by Step PC Build

Ryzen 5 5500 + MSI PRO B550M-VC + RX 5700 + BITFENIX NOVA MESH M | Step by Step PC Build | 4K (2024)

Рет қаралды 5,196

Күн бұрын

System Specs Below. Thanks For Watching ! Please Like and Subscribe For More Content Like This :)
CPU - AMD RYZEN 5 5500
GPU - XFX AMD Radeon RX 5700 DD Ultra 8GB GDDR6
MOBO - MSI PRO B550M-VC WIFI
COOLER - Thermaltake Contac 9 SE
RAM - TEAMGROUP T-Force Delta RGB 16GB (2x8GB) DDR4 3600MHz CL18
NVME - KINGSTON NV2 2TB
CASE - BITFENIX NOVA MESH M ARGB
PSU - DEEPCOOL PK600D (80+ Bronze)
00:00 - Intro
00:11 - HARDWARE Overview
02:35 - Installing CPU
03:08- Installing NVME SSD
03:34 - Installing Cooler
04:19 - Installing RAM
04:44 - PSU Unboxing
05:32 - Installing I/O Shield
05:44 - Installing PSU
06:22 - Installing Motherboard In Case
07:56 - Hooking Up Power Cables & Front I/O
10:00 - Cable Management
10:12 - Build Almost Complete, Close Up 360 View
10:22 - Installing GPU
12:50 - Build Complete, Close Up 360 View

Пікірлер: 48

@jameserasmus7891 2 ай бұрын

I bought a MSI B550M Pro-VDH WIFI with an AM4 Ryzen5 5500GTfor my wife as an upgrade from her old MSI B250i

@jamescasper9581 5 ай бұрын

Wow what a video , I just ordered the same case with a 5600 , Rx 6700 , same mobo , this will be my first build and this video is perfect for a reference , 🙏

@ChannelGamingTech 5 ай бұрын

Thank you ! Good luck on your build :)

@m1ntygames 3 ай бұрын

I'm getting the same motherboard with a 5600x and an rx 6650xt

@ChannelGamingTech 3 ай бұрын

@@m1ntygames awesome choice 👍

@Nuzkeh Ай бұрын

Hello did you have to update the drivers for ur mother board or no?

@SaikuTenkai Ай бұрын

hows the performance i ordered those exact parts

@SphereOfInsight 2 ай бұрын

Great video! How would I connect the 3 argb fans in my case to this mobo?

@ChannelGamingTech 2 ай бұрын

Thank you ! I connect that at 09:08 in the video

@NintendoADV 26 күн бұрын

Hey man! I plan on getting this same case and I was curious if you feel that you need additional fans for this case? I plan on running a 6750 XT and a Ryzen 5600. It's my first build and I plan to run 1440p games.

@ChannelGamingTech 26 күн бұрын

@@NintendoADV Hey ! The stock fan configuration works just fine. I’ve tested Ryzen 5 5500 with RX 5700 & 6600 in this case. I’ll link both benchmarks videos below so you can get a reference of what temps might look like for you (same case is used in both benchmark videos) kzfaq.info/get/bejne/i7Sdn5V6rMfIXZc.htmlsi=4VdBkMg8Cfl7J8f5 kzfaq.info/get/bejne/ebV3i6h8lZncpWg.html

@NintendoADV 26 күн бұрын

@@ChannelGamingTech Awesome! I’ll give this a watch, thank you for being a great resource in the community!

@ChannelGamingTech 26 күн бұрын

@@NintendoADV you’re welcome :)

@UnbreakableJake 2 ай бұрын

I have a m.2 ssd that's the same size as the one in your video. Is it fine to leave that other standoff on the board under the ssd? I'm building something with this same mobo and I'm pretty new to PC building, so I was just wondering.

@ChannelGamingTech 2 ай бұрын

It’s always a good idea to remove any stand off’s underneath the SSD as it can interfere with the PCB. Good luck on your build 👍

@lucyqu3436 4 ай бұрын

I wonder if a Ryzen 7 5700g would work out the box with this mobo?

@ChannelGamingTech 4 ай бұрын

It does :)

@Jaymane_ 21 күн бұрын

hey did this combo work out of the box?

@ChannelGamingTech 21 күн бұрын

@@Jaymane_ yes, no bios update required

@jamescasper9581 3 ай бұрын

hey man the build went great and has been running great. I am having an issue where i cant change the color of my fans. I go to mystic light and my mother board doesnt pop up. Also it says there are preset lighting options already on the case and i cant figure out how to cycle those either. Any help would be much appreciated.

@ChannelGamingTech 3 ай бұрын

Hey ! Glad to hear about your build ! You can press and hold the reset button, It’s connected to the RGB hub at the back. Doing that will switch between manually switching the RGB by clicking the reset button to having it controlled by your RGB software, in this case Mystic light. (I’m assuming you didn’t unplug the reset wire from RGB HUB and installed it on the motherboard to make the switch function as a normal reset switch)

@jamescasper9581 3 ай бұрын

@@ChannelGamingTech so I have the hub cords plugged into Jrainbow1 and Sys_Fan , I honestly don’t know where I placed reset led sw. on mystic light my motherboard doesn’t even pop up but if I plug my cpu fan into j rainbow 1 i am able to change its color. Do I need the reset led sw plugged into the hub? Sorry man complete novice to this.

@jamescasper9581 3 ай бұрын

Also when I press the led switch on the case it does reset the whole pc

@ChannelGamingTech 3 ай бұрын

@@jamescasper9581 yes looks like you got everything hooked up correctly besides your reset switch wire. It’s functioning as a reset switch, unplug it from the mobo and hook it up to the RGB controller so you can use it to toggle between colours manually by (single tap) or (press & hold) to have it controlled by the software. You’ll see the fans flash ones it goes in software mode from manual mode

@jamescasper9581 3 ай бұрын

@@ChannelGamingTech is the reset switch labeled , reset sw led? Because I don’t have it in my mother board or on my rgb hub

@xendukeyy 2 ай бұрын

My question is where do you get the io sheild from

@ashp_17 8 күн бұрын

theres two types of motherboards when it comes to io shields, some of them are integrated into the motherboard and some come with an io shield if its not integrated

@ashp_17 8 күн бұрын

it should come with your motherboard

@El_CompaChino 5 ай бұрын

Man I really need your help man lately it’s been a real struggle for me because I’ve had boughten this mb but the vdh wifi versión and once I booted it with my 5600 non x it would not boot idk if it’s cause i didn’t have a nvme ssd and I also didn’t have a gpu but all I know is that I had to update the bios which I didn’t want to do because im scared it’s going brick up my mb and rn I’m in the process of returning and so the question I had was if this mb the Msi b550 pro vc wifi doesn’t need a bios update for it to be compatible with my cpu or any 5000 series cpus in general please all I want is a answer from you because i commented on other videos but they all don’t respond plz help 🙏

@ChannelGamingTech 5 ай бұрын

You need a GPU ! The cpu you mentioned doesn’t have integrated Graphics. There is nothing wrong with the board or it’s Bios :)

@El_CompaChino 5 ай бұрын

@@ChannelGamingTech did your ryzen 5500 pair with this mb straight out this box or did u update the bios

@ChannelGamingTech 5 ай бұрын

@@El_CompaChino straight out the box

@El_CompaChino 5 ай бұрын

@@ChannelGamingTech jus wanted to let u know thank u for always replying to my questions u are the only person who has truly been helpful and for that I dropped a sub with notis on 👍🏽

@ChannelGamingTech 5 ай бұрын

@@El_CompaChino anytime ! I really appreciate it :)

@hosvip1 3 ай бұрын

Does it Work with 5600 non x without bios??

@ChannelGamingTech 3 ай бұрын

Yes it does !

@flyboysmokes 3 ай бұрын

Does the 5600x work for without bios

@ChannelGamingTech 3 ай бұрын

Yes It does !

@Popp_cat 3 ай бұрын

How big is the cpu cooler

@ChannelGamingTech 3 ай бұрын

Significantly smaller than a 120mm cooler. I’m linking the unboxing video below ⬇️ kzfaq.info2M1pleA9q-0?si=bwLJXUPc-F0fo8_n

@Superonzeistututtogenezis 6 ай бұрын

5.670,670

@flyboysmokes 3 ай бұрын

How much argb headers

@ChannelGamingTech 3 ай бұрын

1x 3 pin 1x 4pin RGB/ARGB

@flyboysmokes 3 ай бұрын

@@ChannelGamingTech so I need a hub

@ChannelGamingTech 3 ай бұрын

@@flyboysmokes usually RGB fan/lights are able to daisy chain & still get controlled from one port. If you have different brand RGB products, then you might need a splitter or a hub. Just make sure not to mix up 3 & 4 pin RGB headers as they are totally different

@flyboysmokes 3 ай бұрын

@@ChannelGamingTech yea but you said it’s only one header and my fans are different brands

@ChannelGamingTech 3 ай бұрын

@@flyboysmokes so if you cannot daisy chain the RGB, you’ll need a splitter or a HUB