I recently just completed a couple additions to my S-10 so I figure I would show how everything fits in the standard cab.
Пікірлер: 32
@Record36778 жыл бұрын
This is a sweet conversion man. I just picked up a center console (not as luxry as yours but its what I'm looking for.) Gonna pick up a set of leather seats power everything like yours here soon. Video really helped me out. Thanks again!
@codycarter65958 жыл бұрын
can show how you hooked everything up far as the floor shift and the dash to show what gear your in?
@mattbrearley91539 жыл бұрын
Hey I love this idea so much I went and got a console and seats myself what I'm running into is how the console is mounted in the s10 I was wondering if you could make a video of how you mounted the console brakets
@Buchnell4 жыл бұрын
So did you wire it so the heated seats work also? I took leather out of a 99 for my 95 cloth and cut harness to go with seat but not sure what wires go to power and so I got main orange and black that run power seat then small orange/black brown and black/white that are in harness would like the heat to work?
@shadymaint19 ай бұрын
I swapped in a floor shift center console from a Jimmy and some bucket seats from a Cavalier into my 94 S10 5.3 swap project.
@colestone55295 жыл бұрын
I was thinking about taking my 2000 gmc sonoma manual seats and putting power seats in for you was it a hard conversion and was there an existing connector and if not how had was it to wire it in and what materials would.i need?
@leonardocanchola47534 жыл бұрын
How did you get the shifter to lock ? I have a Chevy s10 with a floor shifter as well but I can shift the gears without pressing the brake.
@mcripits85788 жыл бұрын
can u tell me where the wires from the floor shifter splice into in the truck please?
@mattm38436 жыл бұрын
Hey were does the orange wire go i got black red orange
@carpentarhartley86243 жыл бұрын
Wiring changes or is it supported ?(the wirng)
@Snowman3g4 жыл бұрын
Did you get those from a bravada the center console and the seats?
@MrArturo84855 жыл бұрын
What seats did you use for your s10 and console..
@form10910 жыл бұрын
when you show the door panel that's already on the doors I notice the window switches don't look stock.....did the truck originally have manual windows?
@TheCumminsDude5910 жыл бұрын
I now have bravada panels installed with factory switches for the windows, locks, and mirrors. I can post a video soon of that actually now that I am thinking of it.
@richardbrior60869 жыл бұрын
how do i convert my 92 s 10 from a bench seat to bucket seats please send me a message thanks
@jaimelausell7 жыл бұрын
please I need some help, I have Blazer 2 doors and I want to do the same job you doing in your truck, what are the cables in the harness I have to match with the console?
@TheCumminsDude596 жыл бұрын
Everything I used was out of a vehicle at a junk yard. The wiring diagrams and other helpful tips came from many threads on S10forum.com
@shadymaint1 Жыл бұрын
How did you position and attach the shifter to the floor. I'm doing a 5.3 swap in my 94 s10 and am going from a manual to a 4l60e. I got a center console and shifter from a Jimmy. I have the mounting plate that attached to the floor. My 94 truck has no mounting holes in the floor. Thinking about welding some bolts to the floor to use as mounting studs.
@darkceazar94389 ай бұрын
You ever come up with soming doing the same to my 2000
@shadymaint19 ай бұрын
@darkceazar9438 I got it mounted and it looks good. I had to drill some holes in the floor and bolt it down.
@keithharris23902 жыл бұрын
I have a 1997 S10 and I would like to know where did you get those seats in that console that fits in a S10 regular cab
@jeremyleverette6750 Жыл бұрын
Any blazer Jimmy or bravada will work. All same stuff as s10
@luiscarrasquillo97432 жыл бұрын
What shifter did you use?
@johnmaxwell2586 жыл бұрын
Thanks Cummins dude
@stevenmaines91144 жыл бұрын
Lol I dont have to do this in my s10 . Mine has factory floor shift since it's a 97 the only yr they did factory..
@wandalllither24525 жыл бұрын
Iam about doing the same on my Olds, but in opposite way, from a floor shifter to the steering column! Hate these on the floor. P.s. leave some room for a girl to laydown on ya if u know wha i mean
@johnmaxwell2586 жыл бұрын
What were the seats out of
@TheCumminsDude596 жыл бұрын
98+ Bravada
@codyharless46358 жыл бұрын
what is your floor shifter out of?
@freakyflow7 жыл бұрын
I'm going to assume thats centre console is Walnut burl stick on Because i'm doing Walnut burl venner wood On my Blazer by hand and so far i have done the window switch panels and door handle backings and its a pain in the ass to do unless you have a molding machine
@stevenmaines91144 жыл бұрын
Comes that way on bravada
@jettywrat4 жыл бұрын
Yo bruda, im looking for some of the info on this one. Can I shoot you some questions on f.b. or insta?