S&B GM Body Mounts install on the LBZ

Рет қаралды 3,398

Күн бұрын

#bodymount #duramax #poly
BUY!!!
sbfilters.com/products/body-m...
TOOLS NEEDED: or that i used lol
15mm socket
18mm socket AND wrench
21mm socket
jack
drill
impact 3/8 and 1/2in
hammer
flat head screwdriver
torque wrench
this stuff cause mine got stuck :(
small holesaw
drill bits

Пікірлер: 26

@FOXCRF450RIDER 8 ай бұрын

Awesome videos dude. I did the hydro mounts on the rear and it did help a lot but I need to do the S&B mounts because the rest are toast.

@rikkidiesel 8 ай бұрын

Yeah thats why I did this whole like I said in the video cause it replaced everything and mabey eventually I will test out the hydraulic ones in the rear and see if it makes any difference

@FOXCRF450RIDER 8 ай бұрын

I wouldn't. The rubber donuts on the underside are already rotten and it's only been about 5 years. Those S&B shouldn't break down like that.@@rikkidiesel

@flow1180 2 күн бұрын

I installed all 8 on a 2007 Chevrolet Silverado Classic 4.8 now the front bumper has a gap how do I fix it

@rikkidiesel 2 күн бұрын

@flow1180 tight it down more nut don't do it to much. I had the same issue till I torqued It down more

@krewpunk 8 ай бұрын

Saw your truck on the LBZ page and figured i should watch this! Also my LBZ really needs a paint job but with 150k on it do you think its worth dumping a bunch of money into?

@rikkidiesel 8 ай бұрын

Awesome man. thank for the view! mean if its mechanically sounds and runs good. I would paint it. I eventually will paint my truck as I plan to keep it forever lol

@jasonpeter5140 8 күн бұрын

My 2006 tahoe makes pops on turns when the weight shifts to either side, do you think it is the body mounts or is it the torsion bar cross member bushes?

@rikkidiesel 8 күн бұрын

Could be those or your sway bar links also

@bevans5611 16 күн бұрын

Did you ever try the rear hydraulic mounts?

@rikkidiesel 16 күн бұрын

I didnt but I've heard it's awesome or the same as the S&B so I'm just going to stick with these. I'm happy with my ride now. Much better then the worn stock ones

@dylanurbanski3756 5 ай бұрын

you torqued the cab bolts down to what?

@rikkidiesel 5 ай бұрын

I can't remember but I would have to go on to their website. I wanna say it was like 90lbs or 100 something mabey

@RCCustoms73 6 ай бұрын

We're you experiencing any knocking or clunking over bumps with old mounts? I rebuilt my front suspension completely and it didn't fix the bump issue. I know you stated you had some bumping, but I'm thinking this is where I'm headed. Any info is appreciated. My truck: 2007 Chevy Silverado 2500hd classic crew cab 6.0 liter gas engine 4wd.

@rikkidiesel 6 ай бұрын

So it help alot with just the bumps and smooth out the ride alot definitely worth it but my clunk still happens from time to time. Idk if it's the rear axel, transfer case or mabey just my traction bars binding up but of doesn't happen all the time but these helped soften the ride quite a bit

@RCCustoms73 6 ай бұрын

@rikkidiesel Did you do the u joints and check the tail of the trans?

@rikkidiesel 6 ай бұрын

@RCCustoms73 yeah I've checked the u joints there good and the tail peice. I checked it out no cracks or leaking. Idk.

@elflaco9566 4 ай бұрын

Would these fit on a 1500?

@rikkidiesel 4 ай бұрын

It says on their website it should

@avenged06x 5 ай бұрын

I cannot justify $450 for polymer mounts!

@rikkidiesel 5 ай бұрын

I think if u just did the oem ones your only saving like $75. And these will last longer then your truck will

@rikkidiesel 5 ай бұрын

I wanna say it's only like $75 more then OEM but it will never rot out and last longer then your truck will

@avenged06x 5 ай бұрын

@@rikkidiesel so tough for me to spend. I'm pulling the cab to do head gaskets. $1770 for reconditioned heads, mahle C wave stoppers and DHD studs. Doing water pump as well. New exhaust hardware including manifold bolts and up pipe bolts. I'm gonna be about $2800 in and I just don't wanna spend the money of the mounts, as bad as I want them. Lol

@rikkidiesel 5 ай бұрын

@avenged06x I will say it's definitely worth them but yes I understand when u already spent a crap ton on other things lol

@osielmunoz8534 24 күн бұрын

@@avenged06xif you’re body mounts are toast then yeah it’s worth it but if your body mounts look good then you’re fine but might as well pay the little extra cash for these if you do end up buying mounts