SANDING THE FRAME ON THIS RUSTY CHEVY!!

SANDING THE FRAME ON THIS RUSTY CHEVY!! | CHEVY RESTORATION

Рет қаралды 104,399

4 жыл бұрын

Huge THANK YOU! to our Sponsors:
- Hornblasters (Lime = 10% OFF)
- Speed Pole (6.7Lime = 10% OFF)
- Jax Wax Car Care (LIME = 15% OFF)
- VooDoo Ride (Ryan10 = 10% Off)
- Pedal Commander (lime10 = 10% OFF)
- Ridge Wallet (Mayer = 10% Off)
- Retro Shop LLC
- South Bend Clutch
- Wehrli Fab Custom (6.7lime = FREE SHIP)
- Flo-Pro Performance Exhaust
- Rolling Big Power (RBP)
- Aux Beam
- VanTrue
_________________________________________
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
_________________________________________
Links: ⛓
Detailer: amzn.to/2NZWxDB
Shampoo: amzn.to/2NZWPKH
9H Ceramic: amzn.to/2Ql5qEn
Rain X Additive: amzn.to/2xvgfg4
30'' Light Bar: amzn.to/2xnuKCM
20'' Light Bar: amzn.to/2QKvREy
Cube Lights: amzn.to/2NmIRlL
Tailgate Assist: amzn.to/2G4o8yz
Diesel Cap : amzn.to/2NALPyE
Tunes: www.alligatorperformance.com/
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
FOAM CANNON: amzn.to/2u89qRN
GEAR WRENCHES: amzn.to/2t6FzbK
24 Pack Black Ice : amzn.to/2npbPky
_______________________________________
Music: 🎶
/ capiteeon
theartistunion.com/dyallas
/ lakeyinspired
/ joakimkarud
__________________________________________
Social Media: 📺
Instagram: Ryan2546
Snapchat: Ryan2546
Twitter: Ryan2546
_______________________________________
The Crew:
Mike: / dobronos
Ben: goo.gl/cx8uq9
____________________________________________
I am participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Products in the provided links are my recommendations based on honest use and experience with them.

Пікірлер: 397

@aaronpodgorski1617 4 жыл бұрын

Get a harbor freight needle scaler to remove the scales. Makes life easier Ryan..great content 👍

@garetfitzpatrick2043 3 жыл бұрын

And the air hammer medium barrel. Life changer

@jackpayne3996 2 жыл бұрын

"ABSOLUTELY!" Needle Scaler!!! Also, if carefully use at the right angle, air chisel can be a simple way to clean some areas. To bad this guy didn't figure it out before turning his garage into a total dust covered mess!😕 Outside is best, when possible. Also, park dat baby on a large tarp to help make clean-up simpler. Then roll that baby in for final prepping & painting. 👍

@justinhoogstra5109 Жыл бұрын

Air hammer works better

@jackmioff000 Жыл бұрын

A grinder with a wire wheel, a die grinder with wire wheel attachments, a needle scaler, and an air hammer would have made this easy. Cmon dude atleast look into things and tools that would make it easier before you start a project

@wyattmiller5268 2 ай бұрын

The irony of watching this years ago and now coming back to it because I’m now doing the same thing lol. I miss this content

@s0xf4n55 4 жыл бұрын

I’ve yet to see this man wear pants

@Roping87 4 жыл бұрын

Agreed!! And I wish he had a pocket knife too. Drives me nuts to see him open everything up with razor blades and random tools.

@Kylemiller-uw9fn 4 жыл бұрын

Agreed lmao

@BorninVirginia 4 жыл бұрын

I will admit I have never done anything like that however I feel like an angle grinder would help with the tough rust

@nolanmitchell7319 4 жыл бұрын

Darin Fitz yea it just sucks when it grabs something real good and slaps your leg

@brandongarnett5582 2 жыл бұрын

or hiit's a brake line

@PetersOutdoors 4 жыл бұрын

As I have been rebuilding my race truck, I’ve found braided wire wheels at harbor freight work AWESOME on rust and paint removal on the roll cage and frame. I use them on my angle grinder. Thank you for sharing your day, be safe!

@armandogonzalez6822 4 жыл бұрын

Finally, I love this series

@peterkurtz8096 4 жыл бұрын

Remember Ryan, gotta get in the inside of the frame rails also.

@joeyschultz3774 4 жыл бұрын

You can’t get the rust out of the inside in frame rails with out cutting the frame

@peterkurtz8096 4 жыл бұрын

@@joeyschultz3774 you can if you take the front end off and get a sand blaster.

@peterkurtz8096 4 жыл бұрын

Not saying it'll be a cake walk but it's do able

@joeysnodgrass475 4 жыл бұрын

I go an 05 ext cab short bed. So I been watching this for motivation on what to do to mine

@joeysnodgrass475 4 жыл бұрын

Grizz 2 I don’t want a new truck. I think they are ugly. I like my 05. It just needs Bed-liner, frame cleaned up. It runs and drives perfectly fine. Has a little lift and 33s. I’m just looking at small changes that personalize it better than a normal lifted truck. And yes I know I said 33’s because I daily it and pull trailer. Wanted it to be the most practical but taller than stock

@joeysnodgrass475 4 жыл бұрын

Grizz 2 I got 3 inch suspension on 33’s 16 inch rim. I wanna get 35’s on 17-18 inch rim easier to find tires in my home town. Instead of ordering online

@spazewackjob5146 4 жыл бұрын

We like this Because it’s relatable to most of our budget . Not only did you make a world wide viewed truck in your own yard you reaching us on a level we can relate to. No one else doing it with a platform like this. Speaking for us all THANKS DUDE

@CandRpowdercoating 4 жыл бұрын

Loving how fast your putting out videos, hell ya!

@j.d.harris4496 4 жыл бұрын

Cause he barely does anything.

@CandRpowdercoating 4 жыл бұрын

MANIAAC K ya you know besides pull the entire bed off his pickup and then strip the entire back half of his frame of rust within the week. Lol

@kylefournier1018 4 жыл бұрын

Take the cab off remove engine and sand blast it for a “show quality build”

@salscancarello8296 4 жыл бұрын

This series is badass. I wait all day long to watch the vids. Keep up the good work bro

@BoostedRooster93 4 жыл бұрын

You need a needler my friend. Around 100 bucks at lowes

@davidlong5755 4 жыл бұрын

Even cheaper at harbor freight

@steveussrey2180 4 жыл бұрын

Looking good Ryan was so stoked when I seen you posted a new video!!! I’m going crazy waiting to order some of your merchandise!! I give my vote to doing a regular bed if your going show truck route but if you go flatbed personally I think your limiting yourself to what you can do. I’m sure no matter what you do it will be awesome!! Keep up the good work!!! Please get that merch ready to order!!!

@Daniellopez-yy2rk 4 жыл бұрын

Loving this series man, can’t wait to see the finished product !

@wa012149 4 жыл бұрын

Truck is already lookin good bro!! I have been watching your videos for a while now! It’s good to see an average person using average tools to complete projects.. keep up the great work!

@zeek210 4 жыл бұрын

Love the channel man! Look forward to your videos all week

@chadmiller9740 4 жыл бұрын

Good idea on waiting for the oil pan gasket for the lift. You have to drop the diff out of the way anyway. Also, I recommend the felpro gasket the quality is amazingly better than the original GM. Also while your in there don’t forget to change the oil pickup tube seal. Nice work keep it up!

@johnreaves2974 4 жыл бұрын

This man seriously needs a pocket knife for opening boxes 😂

@CartwrightFour 4 жыл бұрын

John Reaves all the KZfaqrs use a razor blade, I don’t get it. Get a knife already

@jasonpriddy7828 4 жыл бұрын

I'm excited to see this build as a fellow Silverado 5.3 owner love the channel Ryan!!! Welcome back or to the channel yall

@JohhnyGat51 4 жыл бұрын

I love the Chevy vids and quite frankly I'm loving them even more since I crashed mine just bout a week ago 🥺 I love seeing these video notifications pop up

@calebyoung8252 4 жыл бұрын

REVMOVE THE GAS TANK GET BEHIND IT!!!

@adamchabot6283 4 жыл бұрын

I would look around the fuel tank real good as that's where the frame cracks due to rust. with the bed off check out brake and fuel lines too. just a suggestion. i have worked on a lot of these trucks thru the years. keep up the good work!

@bagged91s10 4 жыл бұрын

Keep up the great work Ryan love watching your channel... I'll be doing all of this on my 2004 Silverado ext cab as well..... keep up the great work

@803_l5p 4 жыл бұрын

When you do the oil pan gasket MAKE SURE you do the pickup tube o ring. Common problem on 5.3s they shrivel up and cause oil pressure to be low and fluctuate. Its fairly simple. Remove the front diff and remove the steering rack bolts to drop it down then you can remove the pan.

@bblazeff1 4 жыл бұрын

Everytime I'm in Broadview, I look for ya. I'm just a local subscriber that's seen you in this area a few times. Wallings/Broadview area. Cant wait to see the end results of this Chevy

@kingtazler2571 4 жыл бұрын

Hey I would like to say I love what you are doing with this build

@_paul_kennedy_1121 4 жыл бұрын

the truck gonna look so cool when you done man keep up the work!

@gearsspinning9762 4 жыл бұрын

Watching your videos makes me want to do outdoor chevy build. I got the 2009 Chevy Silverado extended cab.

@ChrisMason.333 4 жыл бұрын

Ryan, go get yourself a pneumatic air "needle scaler" they work incredible for exactly what you are dealing with. The hard rust scales and paint flakes.

@SethRighi 4 жыл бұрын

Getting it done son! 💪🏽

@dominikclark8860 4 жыл бұрын

Work at a Toyota dealership that the tundras have frame recalls and to see if it gets a new frame we use a needle scaler to get the hard rust off and it works great! Would definitely recommend getting one to get your hard to reach places and the hard rust spots! They truly do work amazing. Definitely worth the money

@OneTruRonin 4 жыл бұрын

Keep the bed. I want to see the bedside repair! I have to tackle that on my ‘08 Sierra SLT soon!

@tyleraversano6128 4 жыл бұрын

Ryan: *Talks wearing a respirator* Me: Dr. Evil?

@XNad0991 4 жыл бұрын

The constant video uploads are awesome

@petermadonia1381 4 жыл бұрын

A lot of hard work man! This will pay off big!

@workingmansrestorations7071 4 жыл бұрын

I been waiting for this episode.

@jordanguzman4472 4 жыл бұрын

Keep doing your best bro!

@jordan_5.450 4 жыл бұрын

Love the new Intro Ryan ! 💯🤟🏻

@albertosaldana7456 4 жыл бұрын

Great video. Keep going man

@Hayden2844 4 жыл бұрын

Would you ever like to get lime green storage racks for the garage on the window side? Definitely would look cool!!

@spencerharmon1007 4 жыл бұрын

You looked like you had some fun beating the crap out of that truck. Can't wait till it's done

@TheLoneDude 4 жыл бұрын

Love watching your videos .

@michaelakers7671 4 жыл бұрын

Loving this series, also good series for teens looking to upgrade cheaper trucks

@loganh77 4 жыл бұрын

Great vid man

@zachbrowning1325 4 жыл бұрын

Chevy life

@BERTRAND85O 4 жыл бұрын

you got me wanting that for the paint removal on the square

@ryan2546 4 жыл бұрын

😏😏😏

@steveussrey2180 4 жыл бұрын

One thing I forgot about was the hitch I’d cut the one on there off and start over with that!! Oh well ill shut up now and let the master work his magic!! Get em brother!!!

@karmaacosta 4 жыл бұрын

You and Demolition Ranch making renovating videos constant.. Making me want to fix up my Dodge Dakota lol

@kirklandcolbert4367 4 жыл бұрын

Next time you run into rust there’s a thing we use on our towboats called chemprime during painting season. We put it in spray bottles and it takes the rust right off with a rag. Makes it way easier (surface rust, won’t really work on rusted through spots lol)

@Hickmanlawncare 4 жыл бұрын

Needing to go to bed but seen this notification and just had to watch.

@jesseV3368 4 жыл бұрын

Nothing like a little percussion therapy😉😉

@kyler3258 4 жыл бұрын

So what is all going to be happening on the silverado are you going with a lift big tires or are you just restoring it as a daily?

@clnfreakone8486 4 жыл бұрын

you need a needler for that hard to come off stuff and hard to reach areas ... love this project.. make sure you check the shock mounts and make sure they are solid I just put shocks on my father in laws truck and shock mount ripped off and it was a pain in the ass to weld with out pulling the bed ... I did my Dakota frame in the fall

@kohlbycotterman8252 4 жыл бұрын

I would try some kind of spray on rust dissolver to help with the process to get to spots you can't reach very well.

@flippingdrummer 4 жыл бұрын

Well dang, now I'm considering doing that to my truck

@foxdenoutdoorslucasmerritt312 4 жыл бұрын

The under coating works good down here in the south got a truck with 340,000 miles never been painted and no rust and I got a 1984 and it is the same way

@professionalsinprogress 3 жыл бұрын

good work bro!

@Mr.TBirdy 4 жыл бұрын

Using an air chisel with a rubber band securing the shaft to make it bouncy would make hammering so much easier and take less time. How you do it is take a good thick rubber band that’s at least an half an inch thick around the shaft using the cows hitch or looping it around and through the hole is the best way to attach it (that’s the best way I can explain it) and have it go on top of the gun and onto the back of the handle. That’s the best way to get the flaky shit off easily and less time consuming. I learned this through a guy who ran a small channel and I can’t remember the name but he was so helpful. I will edit this comment when I can find him to give him credit for the idea because I know I would’ve never had thought of that trick.

@kevinwarren4926 4 жыл бұрын

A needle gun would make that so much easier!

@krisboge3727 4 жыл бұрын

After you finish the chevy you should do more restorations

@mr.dontknow4536 4 жыл бұрын

Hey what's up! I highly recommend that you get that frame sandblasted, the rust is like a cancer to the metal and if you blasted it and is a solution to further prevent the rust you will not have to worry about that rust issue for a few more years. Just ensure that the solution is not oil based.

@brittanymatthews9376 4 жыл бұрын

I’ve learned from owning 2 Chevrolet trucks, any time you have to replace something always gets AC Delco parts when available. They always seem to last longer and you don’t have any bugs/problems out of the parts. I had a 2000 Chevy truck and now have a 2005 extended cab truck Edit It will be easier to replace the gas tank straps, I had to replace them on my 05 and they were like $20 for both straps and just use a piece of wood and jack the gas tank up and the straps are easy to change.

@snowplowin5937 4 жыл бұрын

To get that gas tank strap to fit On the other side of it up in the channel area it is bolted to the frame 15mm iirc. Take the bolt out then hook the strap in place and then put the bolt back in Obviously support the tank while doing this.

@2by_Yoter 4 жыл бұрын

Lovin the new intro

@darktrident1640 4 жыл бұрын

When I did my tank straps I had to put that side in first and then put the bolt side in but it took a jack to lift the tank up far enough to get the bolts to thread in

@Killacam440 4 жыл бұрын

Flatbed! And it'll be a good videos to make for people thinking of doing a flatbed also

@ESLinsider 3 жыл бұрын

7:46 That frame you are knocking on is hollow or solid or hollow in spots? If it's hollow how thick is the actual steel?

@jacewilson8886 4 жыл бұрын

Habor freight has a sand blaster for cheap that i got and it works great, for all the little spots you can’t get with the grinder you can shoot sand in those spots and it works great, id try to take it somewhere where it wont matter to get messy cause the sand gets everywhere

@steveussrey2180 4 жыл бұрын

So I’m I correct in waiting for your website to open to be the fastest way to get your Lifted co merchandise. Love the new beanie hat!!!!keep rocking it bro!!!

@grantmeyer03 4 жыл бұрын

I love the flat bed design but what if you went old school and had a hardwood bed? Couple of 2x6's or 2x8's stained real deep dark to match the feel of the truck. No metal needed except maybe the edges or the mounting hardware. If you wanted sides you could even through some low profile fades on it.

@joeyostrom8620 4 жыл бұрын

CM flatbed with stances out wheels would look badass!!

@stephendixon3658 4 жыл бұрын

Best way to do the tank strap is, support the tank... unbolt from the opposite side... hook the tab then bolt it back up.. is still a bit tough.. replaced both of mine.. that’s the easiest way I found.. good luck man.

@jimmyhamm6041 9 ай бұрын

Yea I have to get to mine next summer Bed removal and fuel tank and get to my frame . Illinois is hard on all vehicles.

@clayishmist8404 4 жыл бұрын

love the vids

@jboyles5563 4 жыл бұрын

I really hope you film replacing the cab corners and rockers I'll be tackling my corners and outer rockers soon

@loganpinkham2000 4 жыл бұрын

Would absolutely love a flatbed build

@mikehardeman6875 4 жыл бұрын

Green flat bed lifted Chevy 🤔🤔 actually an amazing idea.

@afranklin5670 4 жыл бұрын

Like the different intros

@airsoftsnipes100 4 жыл бұрын

a flatbed with skirts would be pretty cool

@singlepistonproductions3232 4 жыл бұрын

Do a 6” lift, 22x12 black arkon Lincoln wheels and 35” fury’s

@ethenstoelting4854 4 жыл бұрын

Thanks for that man

@JeffreyHuntera 4 жыл бұрын

Good tip for ya weld caps on the cross members to close them

@drakeevers5174 4 жыл бұрын

I had an 01 Silverado, dropped the gas tank twice for a fuel level sensor and fuel pump, also replaced both straps, if you need advice let me know

@CountyCorral 4 жыл бұрын

Air hammer with a chisel does great work of that caked on rust

@stevebauer6293 4 жыл бұрын

For the gas tank strap you need to remove the bolt on the other side then connect it to the bracket and put the bolt back in. It will draw the tank up.

@n3mothetwiztid 4 жыл бұрын

How would you recommend fixing rust holes in the truck bed where the part that covers the wheels.

@n3mothetwiztid 4 жыл бұрын

It's near the wall of the truck bed

@n3mothetwiztid 4 жыл бұрын

It's a 98 dodge ram 1500 ext cab short bed

@calebjackson8724 4 жыл бұрын

I hope you got some flowmaster on it would sound so good on that truck .

@cantstopwontstop976 4 жыл бұрын

Hey Ryan, you thought about a reverse level on the Chev? Could look sick with some 20x12s and 33s

@henryhughes3411 4 жыл бұрын

Just got done with this project a couple months ago. Buy a needle gun from harbor freight ($30) and it will really help with removing the scale.

@julianramos6551 4 жыл бұрын

replacing the fuel pump is pretty simple you just have to knock the lock ring loose and disconnect the wires and it pulls out nice and easy those trucks are notorious for fuel pumps going bad had it happen on mine not to long ago. they also recommend changing the fuel filter while youre at it.

@danielkowalewich747 4 жыл бұрын

I’m 14 years old and bought a 2003 Tacoma 3.4 litre 5 sped manual. What are some relatively cheap mods that will make a durastic difference in power and looks. Looking best bang for my buck. Keep up the good videos!!

@geraldclemens1682 4 жыл бұрын

Keep the bed .02. If you plan on painting in lime green definitely keep the bed. Great videos.

@GameFlaws 4 жыл бұрын

You will need new tank straps they rust and wont go back into their hole, for the pump you’ll obviously need a pump, a new pump o ring for the top and a fuel line disconnect tool to make life easier, good luck!