I will give you my experience riding with the S&S 475 Cam vs S&S 465 Cam. The bike has been fully tuned on the Dyno. Has a Vance and Hines Power Duals Header Pipe with Tab Performance Louvered Baffles.
Пікірлер: 98
@MichaelLatham-qp6od4 ай бұрын
I saw this video and thought of good ol East Texas immediately. Same type of riding that I love
@huskerjock2 жыл бұрын
I’m just like you with the sound and why I’m going with the S&S 475c cam. Some people think that’s stupid to choose a cam for those reasons but I disagree. If I’m paying with my money I want it to sound like how I want it to sound. My warranty won’t be up till next April but I’m going with the whole S&S 475 cam kit with a Jackpot 2-1-2 header, S&S stealth air breather with a dyna jet power vision tuner. Already have the Tabs mufflers w/ zombie baffles on it now. Ride safe enjoyed the video
@sharpshooterusmc892 жыл бұрын
Adding a cam will not change your rpm/speed ratio. It will give you more torque so you don't have to downshift as often. You can go from a stock 107 and drop a 131 crate motor in it, if you ran 2500rpm at 70, your still going to run 2500rpm at 70 unless you change gearing or belt pullys
@rockcrawlerchurch2976 Жыл бұрын
Yeah. The one difference though can be redline. So maybe hes riding in a slightly different rev range due to a higher redline hence that feeling of a change.
@mikegross3800 Жыл бұрын
@@rockcrawlerchurch2976 maybe. The fact remains that if someone is going to produce videos, they should at least understand what they are talking about.
@o0Hotiron0o Жыл бұрын
Thank you, Scott, for the vlog and your service. I have a 2017 FLHR 107 with the S&S 475 and have to agree with you in your comparison between the 465 and 475. Thanks again.
@jakeeisele43442 жыл бұрын
This video answered all my questions… I’m up in Minnesota watching it snow, with a 22 road king special waiting for me at the dealership. Carlini’s and tab slip ons are on and I’ll be going with the 475 cam for sure! Thanks man!!
@aggie12thman1219932 жыл бұрын
You are so going to "LOVE" it. Just got back from a 3 hr ride, this cam just kicks ass through and after the turns. So happy for you! Thanks for the comment.
@Tyfyss2 жыл бұрын
Looking at the Woods WM8 22x cam myself, with the V&H power headers and the 450 exhaust..should sound great 😎
@aggie12thman1219932 жыл бұрын
@@Tyfyss You will love!
@seanmay36054 ай бұрын
I have a 2023 road king custom. I opted for the performance warranty through Harley Davidson. For an extra couple of dollars, they do the work and everything is covered under warranty.
@2021FLHRXS2 жыл бұрын
Awesome RKS. Looks GREAT sounds GREAT. Good info on the cam, will be the one I choose for my ‘21 RKS. 👍👍
@MadMexism2 жыл бұрын
465 cam is perfect for the 107, and the 475 is better for the 114, 117, and up. The 107 has shorter legs. LOL. Great video sir. I had the 465 cam in my 107 softail standard. made that 107 very explosive at lower rpm. My new 107 equipped Road glide is gonna get the Zippers 468 cam. Its about right down the middle between the 465, and 475.
@aggie12thman1219932 жыл бұрын
Thanks for posting this info.....Good to know about the 107.....Would love to hear about the 468 as well once you get it in......Thanks again!
@tommiller87142 жыл бұрын
Adding to my comment (below): Good analysis, type of riding and where each S&S Cam (475 / 465) has it's strengths. Lot of my riding is local here in So. Cal. (beach, mountains, curves, city stop & go; and occasionally some highway cruising). A few of my friends are running the S&S 475 Cam and they sound good. My 465 cam does have some "chop" cam note in the exhaust, and is very similar to the 475 cam. Future possible mod: S&S 131 Stroker Kit (4.625" Stroke / 4.250" Bore) and either the S&S 540 Cam or S&S 550 Cam with other supporting mods. (64mm Intake manifold, upgraded compensator, upgraded clutch, possible chain drive conversion, etc.). Ride safe brother.
@edward1967able Жыл бұрын
I’m in the market for a torque cam and I will probably go either the 475 on my 2020 107, do you know any reputable shop here in Southern California for an install ?
@tommiller8714 Жыл бұрын
@@edward1967able Hello. I recommend Bartels Harley Davidson in Marina Del Rey.
@edward1967able Жыл бұрын
@@tommiller8714 thank you sir .
@DeBa12267 ай бұрын
Brother ho close in sound between the 465 & 475?
@veejazz17506 ай бұрын
Much appreciated! Ha e been considering a 528 but this gives some perspective as well
@TM-sn1oz Жыл бұрын
I forgot to keep in mind that you are comparing both size cams for your size motor only (the 114). I have the 107 ci. and the 465C sounds so hot and lopey, I love surprising everyone with blasting off from a stoplight at idle without having to rev the motor. Never having to worry about stalling the motor. If I had installed the 475C in my motor, I would have to give it some more throttle to take off, which I don't like having to do. If I had the 114 ci, I would definitely do the 475C, because the 114 already has higher torque in stock form, with larger bores and longer crank/rods, so it is able to better accept the higher lift 475C cam and still have good low end torque. Both cams make for a great lopey sound, but the 465C is more suitable for the 107 and is very lopey. The benefit of not having to rev from a start will make it a quicker start from a green light.
@tommiller87142 жыл бұрын
Good topic (S&S 475 and S&S 465 cams) & video. My combination I have on my '21 Road Glide, RDRS equipped, Stage-2 114: S&S 2-1 Sidewinder Exhaust (w/cat); S&S 465c cam (full S&S Cam Chest Kit); Fuel Moto # 3956 Air Cleaner Kit (w/stock ventilator outer cover); Trask M8 Checkvent; HD Fan (added to oil cooler); stock intake manifold & injectors; and Dynojet PV3B Tuner (Map by Fuel Moto). Have a ported S&S 55mm Intake Manifold but haven't install yet. My configuration runs excellent & pulls hard from just off idle and well past 4000rpm. On a recent ride, total about 120 miles, knocked down 46.4mpg cruising mostly at 70 mph on the freeway with some in-town cruising. All in all, pretty satisfied for now with the all around performance. Tom M. '21RGS & '22FXLRS
@robertpronovost3839 Жыл бұрын
Glad you made this distinction. I’m on hills 40-65. It tells me I need the 465 in stage 3. TFyService. 26th Division.
@TM-sn1oz2 жыл бұрын
I have the S&S 465C and it doesn’t matter what speed you’re at for comparison because all the cams perform at speed, miles per hour, it’s where the Rpm power comes in at and falls off at that makes a difference between the two cams. The 465 C you can blast off from idle without having to rev the bike first to get power from a stop. I don’t have to slip the clutch at all. It pulls all the way up to 5500 RPMs like crazy. Do I need to shift at 6000 RPM like you can with the 475C?, I don’t think it’s necessary to rev the motor that high. The lower Rpm power gain and the sound difference from stock makes the 465C an awesome cam. As far as the Idle lope sound goes, both S&S cams sound exactly the same. I like the reliability of the lower lift cam on the valve train. Roll-on power with the 465C is awesome at any Miles per hour below 5000 RPMs. I can ride over 100 miles per hour and cruise there with no problem.
@ryanmitchell4266 Жыл бұрын
I got the 465 on my Road Glide. Peak Torque at 2000rpm and I shift around 5000 rpm. No regrets whatsoever. It also sounds better than the 475 IMO. The potatopotatopotato sound of a twin cam comes through the 465 more than the 475. Instant torque even if you're lugging in the wrong gear
@freebehindbars86548 ай бұрын
465 is a great cam, especially for 2 up and for those not planning any other modifications. I went with the 475 due to the fact I knew I wanted to add displacement. That 465 doesn’t really support a bump, definitely wouldn’t put it in the 124 kit I went with.
@TM-sn1oz8 ай бұрын
I totally agree. Size does matter. Larger than 107 motor, definitely the 475 cam or bigger.
@robertcurtis94492 жыл бұрын
I'm adding the S&S 465 cam to my '19 King. I'm after the lower end torque for cruising. I'm not a bat out of he'll rider for the 475
@morrisdennis Жыл бұрын
I did the s&s 475 and luv it! With a SE tuner no drop in mpg, runs a little cooler still has the cat...
@loopertrooper6671 Жыл бұрын
That sounds really good. Bike looks great.
@tomharvey2832 жыл бұрын
Same cam I got. But I when I did the stage 3 they put higher compression pistons. I’m in love with it.
@aggie12thman1219932 жыл бұрын
Awesome....thanks for sharing.....might take that next step.
@superglidemustang Жыл бұрын
Thank you for this video.
@Rigz7272 күн бұрын
Bit off point but looking on a bar change for my RKS. Love the look of yours, can I ask what you’re running with there?
@gambietti Жыл бұрын
Helpful video, thank you
@kurtfirestone2761 Жыл бұрын
Running that high RPMs could be why your MPG went down and a Kim isn't going to change your RPM gear ratio. It will run the same RPMs in the same gear at the same speed
@TM-sn1oz8 ай бұрын
I commented before. So to all: Having now run my 107ci motor with the 465C for a year now, I'm needing a new rear tire from spinning when the light turns green. Acceleration is great and linear but would like more pull at the top end. If the 475 pulls more at the top than the 465C, I'd go with that, since the bottom end is so great, why not make the top end great too? S&S suggests the 465 for the 107motor and the 475 for the 114. I am convinced that either would work just fine in the 107, especially if you upgrade the air cleaner, have FP3 and free flow mufflers. Rode my friends new bone stock Fat Boy 114 and my 107 with the 465C is faster in every way. Either cam you go with, do it, you won't be sorry.
@DeBa12267 ай бұрын
Pulling at the top just means one wants to ride hard and fast. That’s not for most.
@kellybgliding2 жыл бұрын
Nice bike and good stuff to know. I’m subscribed the bike sounds awesome
@aggie12thman1219932 жыл бұрын
Thanks Kelly....I'm headed to California for a two week ride, will post some good stuff for you when done with that trip....Enjoy and thank you for subscribing....I'll return the favor.
@kellybgliding2 жыл бұрын
@@aggie12thman121993 thanks 🙏🏾 and you have a blessed and safe trip
@kurtnorrell2 жыл бұрын
Sweeeettttttt....475 all the way.....
@DeBa12267 ай бұрын
Great video I just stumbled across! Would there be any noticeable difference in chop between the 465 & 475, and everything else stayed the same? I was thinking about the Red Shift 468.
@kennethreynolds8 Жыл бұрын
Hi fellow east Texan, I do most of my riding on Interstate 20 at 80 plus.
@aggie12thman121993 Жыл бұрын
Howdy Kenneth......clearly this cam better fits your riding style. Have fun, be careful, hope to see you on the road.
@lawrencebrandt8448 Жыл бұрын
fueling has a 465/475 they say the 475 shows better numbers in the 114 /117 longer stroke than the 465 did, it works best with shorter stroke engines 107. what lifer did you install , talk on the street is fueling has the best .the S.E. performance ones still drain after sitting .
@ChuckGlyder Жыл бұрын
You'll appreciate the 465 when the old lady and some luggage on it .
@ethanpersons15882 жыл бұрын
Scott, did you leave the wrap on your louvered 2.5 baffles? That setup sounds freakin awesome! Probably a lot louder in person too I’d reckon. I’ve been having hesitant feelings about going with the 475 for my road king special but this helped. I’ll either be running Khrome Werks header and mufflers or Tab header and mufflers. Please post up more sound clips and drive by videos when you can!
@aggie12thman1219932 жыл бұрын
Yes I did leave the wrap on the baffles. I agree I think the sound is absolutely amazing. Yes it is louder in person but it's not so loud that I feel uncomfortable with my neighbors. I know they hear it but it's not earth shattering. With the original zombie baffles I love the sound while riding, but it got way too loud late at night or really early in the mornings when I fired it up around my neighbors or riding through town. With these I feel absolutely comfortable and it sounds amazing. I will certainly get some drive-bys for you guys soon. Thanks for the comments and best of luck with your new cam. You will absolutely love it. I would never go back.
@ethanpersons15882 жыл бұрын
Thanks Scott! I’m in Vermont and a lot of my riding is 2 lane back roads I guess you could say. Usually anywhere from 40-50 mph. If I wanted a little more power and response, I could just cruise in 3rd gear instead 4th correct? Even so, like you said, it’s not a race bike and I’m sure it’s still way more power then stock in the 2500-3000 range. Thanks 👍🏻
@aggie12thman1219932 жыл бұрын
@@ethanpersons1588 Yes, but you get the power kick around 2800 RPMs all the way to redline.....It's an insane kick....but under 2800 it feels like normal stock, like I said that's so quick because your RPMs jump from 1800 - 3000 pretty quick in the lower gears. At 40 to 50 mph I would probably be in third gear consistently. I'd say my fourth gear is more in the range of 55 to 65. This is kind of nice because in that lower gear when you hit it it's going to jump. My third gear transitions so quickly.... meaning I go from 40 mph to 60 instantly. If you're looking for power after you're already at speed this is the cam to go with for sure. If you're looking for power at dead stop to 60 mph then perhaps the 465 is the way to go. I like to ride the roads much more than I do stop and go traffic thus I chose the 475.
@ethanpersons15882 жыл бұрын
Sounds awesome! I appreciate the info. Did you get even more of a torque bump when you put the louvered baffles in?
@aggie12thman1219932 жыл бұрын
@@ethanpersons1588 I did on the dyno, but I personally believe people read into those numbers way too much. Meaning maximum torque numbers and maximum horsepower numbers are coming way high in the RPM range. Granted there is a bump in the lower RPM ranges as well but you're talking 10% maybe at best and it's noticeable as you ride but not as noticeable as on a chart. The noticeable changes as you ride are the gearing changes and acceleration from 2800 RPM and beyond. If you're looking at a Dyno chart you can't feel that...... What I'm trying to get at, is when you start riding you're not gonna even think about your Dyno charts at all. The biggest impact you're going to have are the gearing changes and acceleration. It's that simple. If you start reading into the Dyno charts too much you will go crazy to some extent trying to squeeze out performance in every single inch of your rpm range. The fact of the matter is you have to choose between one or the other ......low end torque or high end torque performance. For me since I ride on the back roads mostly I've preferred the higher end torque performance improvements because that's where I live most of the time when I'm on my bike. If you're in stop and go traffic then you may want that low in torque to give you a little bit of an acceleration bump right out of the gate. It's really that simple and looking at Dyno charge is going to drive you nuts. My opinion!
@FreedomRider19822 жыл бұрын
💯👍👍
@socalfun64 Жыл бұрын
Did you use any different Spark Plugs with the new Cam and Tune?
@craigprobert32762 жыл бұрын
Love the vids mate , what brand are those passing/ auxiliary light you have on you’re bike ? Thanks
I also installed the 475 cam kit, great upgrade, no regrets here. And like you said, it changes the way the bike sounds and rides, how a Harley should be. Also wanted to ask, that number decal, what size is it? Want to do something similar
@aggie12thman1219932 жыл бұрын
3" tall by appropriate width depending upon the font.
@sgthighspeed59 Жыл бұрын
So the power vision tuner with S&S's cam, Vance and hines power duals, and Tab slipons didn't void power train warranty? I have a 22 RGS, and I want to do similiar mods.
@bobmoore24527 ай бұрын
Power vision tuner will void your power train warranty only.
@joshuabennett7232 жыл бұрын
96ci evo? pretty sure they never made em bigger than 80ci
@ellissmithjr6599 Жыл бұрын
I think it's all Awesome what you have in this bike,but I must ask... You going faster speeds in lower gears,isn't this the reason that you are getting Less feul mileage?🤔... For my riding style,this may really be the most beneficial in the Passing Lanes at faster speeds...not going through the gears at a much faster speed all day long...and maybe get better feul milage?🤔
@aggie12thman121993 Жыл бұрын
For sure! Trade offs. Clearly the original cam from the factory is set up for the best fuel mileage possible. My goal in getting the new cam was two fold, one I just absolutely love the sound. Two, I want a little bit more acceleration at higher speeds to get around traffic. On a 2 Lane Highway I like to get around vehicles pretty quickly. I can't stand being in blind spots or hanging around where somebody can't see me so being a little more aggressive helps me to be visible and get in front of them then I'll slow back down and get back to a steady pace. This cam really helps me jump past the traffic. There is no question I'm losing fuel mileage. It really doesn't bother me. I look at it as a good trade-off
@ellissmithjr6599 Жыл бұрын
@@aggie12thman121993 Gotcha 👍😎🇺🇸🇺🇸🇺🇸
@isaaccarroll6467 Жыл бұрын
where do you get the aux light set up
@gnt2562 жыл бұрын
wait....putting a after market cam and tuner didn't void your warranty? My dealer told me anything other then SE would void my extended warranty.
@aggie12thman1219932 жыл бұрын
Did not void the warranty because Harley did the install with Harley accepted partners, parts, and certified labor.
@chrispainter82887 ай бұрын
That may be partially true. It really depends on the individual Stealership. What is warranty-able at one most likely won't be at another IF they are following protocol. A golf buddy and personal friend owns 17 Harley and Triumph stores, and he states the MoCo is recently cracking down on aftermarket engine mods, while putting their franchise licenses in jeopardy. @@aggie12thman121993
@BdeSimon Жыл бұрын
What did your tuner set the idle to? Mine set it to 1k to 1100 and i think it just idles a bit too high
@backcountrybluegrass477011 ай бұрын
I got the 114 with the 475 etc. Idle at 950.rpm
@BdeSimon11 ай бұрын
@@backcountrybluegrass4770 thats what i figured it should be set to. Ive got the 475 too
@xx412xxbluntz8 Жыл бұрын
Need some zombie baffels
@lawrencebrandt8448 Жыл бұрын
the sluggishness you described is telling you to down shift .
@444International2 жыл бұрын
If you're on the highway at 70-75 in 6th gear, will it still pull (not racing, but to get around an irradic driver, etc.)? I have the 475C kit and plan on installing as soon as the weather breaks here in Ohio. However, I just spoke with Fuel Moto and they said I will have to downshift two gears to pass. Looking at charts, I feel that this is hard to believe since the torque and power are better than the stock version regardless.
@aggie12thman1219932 жыл бұрын
I have the M8 114.......the Fuel Moto guys are completely inaccurate. First off, you will not be in 6th gear at 70-75....You will be in 5th....that's the biggest change with the cam is the gearing changes completely. You will be running around 3000-3200 rpm at 70-75 in 5th gear.......You certainly will not need to downshift out of 5th to accelerate very quickly around a car at 75mph. VERY Quickly! You will be running 80-85 in 6th at 3000 rpm. Don't listen to them at all.....Obviously they don't have "Real" world experience.
@krl0232 жыл бұрын
@@aggie12thman121993 I find it hard to believe Fuel Moto would say anything like that. They are one of the best out there. Also you need to know those power duals are leaving a ton of power on the table. They sound good but are terrible for power. It's a well known fact by many tuners. Just a heads up.
@aggie12thman1219932 жыл бұрын
@@krl023 Just speaking to what i witness daily on my bike. "Leaving a ton of power? My numbers are as follows......Max HP 112 and torgue 128.........If a ton of power if left on the table, I'd love to see it. Like I said before, I think people get too wrapped up in performance charts.....I love the pull of my bike at any speed but especially from 2800 rpm and up....it's insane!
@wb45142 жыл бұрын
Do you think the cammed M8’s run better with the cat removed ?
@aggie12thman1219932 жыл бұрын
I've been told the M8 runs better with the cat installed. However I definitely took it out. I'm from the old school boys it's hard to imagine that a catalytic converter would be the way to make an engine perform better. It was my belief to let the engine have better airflow but with that being said there are some back pressure issues that are causing lower torque than is possible. However I go back to what I've always said but I think a lot of people rant and rave over a few percentage points. I had 128 foot pounds of torque in 111 hp on the Dyno.... Can you really argue that?
@marquis58262 жыл бұрын
475 is a Horsepower cam and the 465 is a Torque cam(perfect for large baggers). Right from the S&S website. I have a 18’ Road Glide with Screaming Eagle Stage 3 107-114 kit, S&S 55mm intake 465C cam Screaming Eagle Cam Plate and Super Sucker oil pump(orange one) V&H power duals head pipes S&S MK45 cans HD oil cooler fan Feuling vented dipstick Dynojet PV Fuel Moto tune! It sounds angry
@wb45142 жыл бұрын
@@marquis5826 sounds awesome. Thanks for your reply.
@joshuagray6605 Жыл бұрын
All respect due, but yeah, the other guys already said it. 😂
@luismontanez5097 Жыл бұрын
How is this cam still working out for you?
@aggie12thman121993 Жыл бұрын
Love it....Very happy with it. Especially with the miles I cover and speeds I ride.....Love the jump at higher speeds, it's quite impressive. 30mph and up, you better hold on. I have had several moments where it jerked me back enough it made me nervous. Can't beat that.
@luismontanez5097 Жыл бұрын
@Scott Wells awesome I have the same set up getting done in the shop but I went with the 50 cals zombie baffles. I can't wait. Be safe out there
@canttalk Жыл бұрын
Is that a 22 inch souixcide sissy bar?
@aggie12thman121993 Жыл бұрын
18" Carlini's
@canttalk Жыл бұрын
@@aggie12thman121993 thank you
@wiremuperry4310 Жыл бұрын
So what where the numbers on the dyno?
@aggie12thman121993 Жыл бұрын
Max HP 112 and torque 128
@ChuckGlyder Жыл бұрын
Damn thats some junk road.
@mikegross38002 жыл бұрын
Well, you just lost a viewer. I initially thought you may understand what you are talking about. The absurd claim that a cam change will change gearing shows differently.
@aggie12thman1219932 жыл бұрын
Honestly Mike, you are the one mistaken. I have the CAM in my bike, I damn well know how much the gearing has changed. You sound like someone who just likes to argue....Good riddens.