S10 Ride Along, 383 Stroker # 1of 4 Videos

Рет қаралды 307,180

12 жыл бұрын

1988 S-10 Ext Cab, 383 Stroker, Scat Crank, I Beam Rods, K-B Flat Top Pistons, 10.9:1 Compression
, Demon 750 DP Race Mech Carb, Holly Blue Elec Fuel Pump, Edelbrock RPM/Air Gap Intake, Edelbrock Performer RPM "6089" Ported and Polished Heads, Weiand High Volume Water Pump, Be-Cool Alum Radiator W/ TCI Trans Oil Cooler, Flex Fan, TCI Street Fighter Transmission W/ Shift Kit, B-M Quick Silver Shifter, B-M Holeshot 3000 Stall Converter, Line Lock, Ford 9" Rear W/ Eaton Posi Differential, Moser Axles, 3:70 Gears, MSD Ignition And Plug Wires, Crane Roller Cam "HR-296-2S-12-IG" "Adv- Duration - Intake 296 - Exhaust 304", Crane Roller Rockers 1.5, Double Valve Springs, Pete Jackson Timing Gear Drive, Hedman Full Length Hedders, Milodon Street Strip Oil Pan "7-Qts", M/T Front-"Sportsman 8 Ply "26x7.5-15", Rear-ET Street Radials "P275/60R-15", Weld Wheels, Jegs Ladder Bars, Holds 7 Qts Valvoline VR1 20-50 Engine Oil, K-N 3002 Oil Filter, NGK BKR6E-11 Spark Plugs, Use 93 Pump Gas "No Nitrous Ever", Most Parts Are Made In The USA ! "The NGK Sparkplugs Are Not From USA, But I Tried", Have A Great Day !!!

Пікірлер: 102

@Rizik1986 3 жыл бұрын

I was expecting a ride...

@scottspencer8358 3 жыл бұрын

Never will understand why Chevrolet didn't make a v8 available for the s 10 and s10 blazer when they first came out.

@jeromeycole613 6 жыл бұрын

GM should make us a fresh batch of squarebody S10's, with 327's and 6 speed manual transmission

@Wildstar40 5 жыл бұрын

I always had a dream about auto manufacturers building any car you want that they have ever made. So I could go to Ford and order a 1966 427 4 speed light weight Fairlane brand spanking new in 2019 with the option to get it as it was back then or throw some of today's mods and safety features in it. That would be awesome.

@franksmalls6467 3 жыл бұрын

Not a bad idea always did like a fresh 327 with today's technology could be a great ride.🤗🤗🤗

@franksmalls6467 3 жыл бұрын

That be a great idea always did like a fresh 327 with today's technology that could be a great ride.

@sfcmay1 11 жыл бұрын

Removed power steering pump, easy to turn, The starter is a high torque planitary design starter from JK's starter in Palestine Tx, cost $110.00, Fuel tank is from a s-15 blazer located under the truck bed with a add on fuel neck that fills from the left rear of the truck bed, The radiator hoses are regular Gates hoses with a metal wire flex wrap, Thank for your reply, Have a Great day!

@sethhughes2163 2 жыл бұрын

I realize it will soon be a decade since you first put these on the net... but I for one appreciate the content, the time investment, and most of all sharing it so we could all enjoy it!!! KUDO'S brother, for a job well done! Would certainly love to see what's going on car wise these days. Thanks again, Seth

@patspina707 8 жыл бұрын

Awesome build! This has me inspired for my 01 xtreme.

@ratattack2994 5 жыл бұрын

Quite

@peggyadams7709 5 жыл бұрын

Awesome truck

@PaulWeagleyJr 12 жыл бұрын

Sure no problem.That truck (Look's and sound's sweet)

@sfcmay1 11 жыл бұрын

Hello Gib, I have a bolted up Ford 9" rear with ladder bars welded and connected near the bottom of the Ford 9" axle housing also the truck has leaf springs for now, The set up is almost like removing the stock S-10 rear end and just Bolting a narrowed Ford 9" on, The headers are from Jegs "HEDMAN S-10 Full Headers" and each side is a section of 2 piece tubes that fit into each other Thank's for your comment and have a great day my friend, See ya!

@sfcmay1 11 жыл бұрын

Thank's for your comment, S-10's all the way!

@franksmalls6467 3 жыл бұрын

Eddie that's a great combination you got there enjoy!!!

@fordfairlane5002 8 жыл бұрын

Nice ride I just bought 99 gmc sonoma and I going turn it to nice hotrod like that that nice truck man sound good look amazing

@garymcnee1773 6 жыл бұрын

#1 Vwbug enthusiasts l

@PaulWeagleyJr 12 жыл бұрын

That was "GREAT" I want another ride soon...

@sfcmay1 11 жыл бұрын

Mike, The Gear Drive is a Pete Jackson Gear Drive and it is not as loud as I would like but it works very very good, I love it, I will be making a better video in a few days and I will take the truck to Pine Valley Race Way in Lufkin Tx and will Run the 1/4 mile a few times, I will drive the truck to the Drag Strip "47 miles" and drive it home, I will have the camera mounted in about the same place and hopefully get some good video, Thanks for your feedback!

@sfcmay1 11 жыл бұрын

Yea, The Pete Jackson Drive is not as loud as I would like but it serves it's purpose, I wish it were louder but for some reason it is not, The 355 that you installed in your S-10 is a good choice, you have done the hard part with the V-8 installation and if something happes to the 355 you can always go bigger without doing a lot of extra work, Thanks for your feedback and have a great day!

@dusting81 8 жыл бұрын

Pretty much same setup I have. Only difference is in some of the parts brand names, it's in a 1996 s10, is bored .060 over (396ci), 2 step on my msd setup and a big shot of nos. I need to add a line lock.

@like2thc 7 жыл бұрын

That Sh#t is Badd Ass.

@ss10ist 11 жыл бұрын

is that a turbo 350 or a 400 transmission?

@kawasaki22db 10 жыл бұрын

Could you possibly give me some knowledge on this. I have a 91 4x4 sonoma and I have a 383 and a 406 and im wanting to put one of those in there. What things will I need to put it in the truck. also do I need a cowl hood for it?

@sfcmay1 10 жыл бұрын

Dominic, I Love 383s, Lots of torque, Hard to hurt, fast, you can make all the horsepower you want with a 383 stroker, I prefer a 383 but a 406 is ok, My truck had a small block 427 in it before the 383 but nitros won that battle, You will need some weld in motor mounts at least a turbo 350 trans and it depends on how tall your intake manifold is before you buy a hood, My 4inch Hood was for the 427 set up but also works for my 383 stroker, I have a RPM/ Air Gap with a 1 inch carb spacer and a 2 inch tall air filter, my stock hood will not close with my engine set up, also you will need a good radiator, I have a Be Cool Alum Radiator, You will need a few more parts than what I have told you here, These are just some of what you will need, Have a Great Day My Friend!!!

@aztekwarrior518 9 жыл бұрын

I definitely thought you said you "should've caught up to that motorcycle and shoveled his balls" but I guess "showed him who's boss" works too... nice truck! I'm working on a 78 Monte Carlo..currently cammed 350 vortec heads, edelbrock intake/carb 350 3500 shift kit, 4.56 with a spool.. how much cop attention do you get? haven't taken mine out yet..a little worried about the exhaust tickets

@sfcmay1 11 жыл бұрын

klowny1969, Very nice, keep up the good work and hammer down with that 383 stroker, Have Fun!

@raydonet 10 жыл бұрын

what trans you running

@6strings1pickup12 8 жыл бұрын

What kind of cheeup did you say?

@sfcmay1 11 жыл бұрын

Harv, The trans is a TCI "350" Competition "Manuel Shift" shifts hard a fast, Thanks for your comment, Have a great day!

@sfcmay1 12 жыл бұрын

Today, adjusted all the roller rockers, they were all a little loose in this video, also a lot of the noise is the loud Pete Jackson Timing Drive Gear, Now engine sounds right and runs a lot better, I'm gonna post a good video next week, Very Hard Running and Burnouts, Have a Great Day !!!

@donweathersbee2863 10 жыл бұрын

Very nice truck. Also some pretty country side. What town is this.

@frankosley9523 10 жыл бұрын

sick

@sfcmay1 11 жыл бұрын

2 Flomasters 40 series with 3" off set tubes, Thanks fidstang for you comment, Be careful my friend, Have a Great week................We also have some drag trucks on here, go to Facebook and look for Piney Creek Performance or KZfaq and look for Piney Creek Performance, Randy Ussery is the engine builder and this man is a do it right Go Fast Engine and Race Truck and Car Builder!

@monsterholics 11 жыл бұрын

Couple of questions for ya. What power steering pump did you use? What starter did you use? What fuel tank is that? Also what upper and lower rad hoses did you use? Your truck looks super clean thanks for sharing!

@jammiejr26 11 жыл бұрын

Runs good

@nelsonparraga4538 5 жыл бұрын

Buen video

@quacksackerthegreatstarfir6996 9 жыл бұрын

Beautiful truck. I wish I had the know how to do that to my 99 s10, or the money to pay someone else to do it for me....

@onewheelup 10 жыл бұрын

shit i know where that is bro,that was crockett wasn't it? you live out towards porter springs ? out towards the lock and damn? i had a 96 s/10 with a 96 vette LT1 with a 5 speed,spun the tires all the way haha.good times man.

@CWR032 11 жыл бұрын

I haven't seen Crockett in about 20 years.

@dwaynejohnson3757 5 жыл бұрын

Sounds real gdtoo

@ss10ist 8 жыл бұрын

it don't say what cam ur using? just wonderd

@1Stallonefan 9 жыл бұрын

Not a big yellow fan but dam nice truck. ;)

@Hidden-comment164 5 жыл бұрын

how much did this set up cost

@CubNole 9 жыл бұрын

Beautiful

@marshallmcdowell3369 8 жыл бұрын

very nice build! sounds healthy. what cam are you running and what compression ratio?

@ss10ist 11 жыл бұрын

u must have a quiet pete jackson gear drive lol but ur s10 sounds and runs real good, like the color too i also have an s10 it's an 84 w/a 355 u can see my video's if u want

@kennysjamshack2410 6 жыл бұрын

Everything is bad ass in Texas

@nova7833 7 жыл бұрын

Nice! How satisfied are you with the sparkplugs?

@fidstang 11 жыл бұрын

Damn, listed everything but what mufflers you are running. What are they?

@Jesus351w 10 жыл бұрын

Have you ever dyno the motor. Doing one my self and hoping for high 400 hp 383 stroker!

@dartgamingable 10 жыл бұрын

you should be able to hit 500 easy

@88MetalMania 6 жыл бұрын

good luck with 500 hp lol on motor please. 400-430 at MOST

@jett-rampartflyer2852 5 жыл бұрын

You put a set of AFR heads on a 383 with the right cam and 500hp is quite doable.

@johnmoose6664 9 жыл бұрын

Is that George Dubya driving?

@bradblackwell642 6 жыл бұрын

are you from Crockett tx.

@sfcmay1 11 жыл бұрын

I'll go fast next video, just for you Jonathan, Be ready!

@charleswilkerson4248 5 жыл бұрын

@mikesbbody 11 жыл бұрын

Hey Eddie, thanks for the video loved it! I've been looking on Y.T for a video like this taken inside I have been thinking about going with a gear drive I know video's can be deceiving but the gear drive didn't sound "that" loud in the video? I'm sure it is for real. Loved the "loss of traction" Haha! one last thing how's the gear drive holding up? Thanks all the best Mike.

@briansmith-yq3fg 9 жыл бұрын

about 425 hp? any overheating issues?

@jdubcbr600 11 жыл бұрын

I likes!

@sfcmay1 12 жыл бұрын

8:45 I get down fairly hard 7000 RPM, Couldn't get traction, Thank's for watching and have a great day!

@MrWetbackswag 10 жыл бұрын

Sounds like g bush lol

@monsterholics 10 жыл бұрын

What type of back spacing on those rims do you have?

@sfcmay1 10 жыл бұрын

Not sure, They wer 8" wheels "Weld" wheels with mosier axles, I just put 10 inch rear wheels on it and 325 - 15 Hoosers, I'll let you know soon, Thanks !!!

@rickjamesb2878 9 жыл бұрын

wanted to ask ya are the mt radials less sticky then there et street?

@bentley4l 7 жыл бұрын

If GW Bush had driven this through out his presidency, we'd have had a lot more interesting 8 years of him...

@richardjones1722 10 жыл бұрын

Represent for the lone star state.

@sfcmay1 10 жыл бұрын

The United State of Texas!

@timhaigler5655 9 жыл бұрын

F8x

@guillermoc7120 4 жыл бұрын

well i have two 383 stroker bore 0.40 one is on my chevy 1500 -1995 and the second 383 install on 98 chevy xtreme 723 hp and the otherone 755 hp 0 nitrous i love 383 engines c12 gas i run both on 1/4 mile

@mknmemories1 8 жыл бұрын

Crockett!!!

@largerooster2059 6 жыл бұрын

Not really that fast ? Revs it out and looks pretty mild ? Hard to tell.

@nickmartin7024 5 жыл бұрын

This better be in Mexico lol..

@ss10ist 8 жыл бұрын

ok ic now

@keasy84 11 жыл бұрын

I love the way Pete Jackson's sound all whiney. Is yours loud at all?

@jdubcbr600 11 жыл бұрын

Did you use the front spring "eyes" for the front 4link mounts?

@vwgli16vracer 6 жыл бұрын

pump gas

@fread51 11 жыл бұрын

This is a very clean swap i'm thinking of doing this to my Ford ranger 460 - 501 Ford Stroker Full Roller Street/Strip

@sfcmay1 12 жыл бұрын

Thanks weagley49, I'm gonna do a great " better than ever" ride along this week, just gettin on it everytime I take off, Thank's for your response brother!

@wesleywood3137 2 жыл бұрын

I remember my first sdime weak

@marcelwilliams2772 11 жыл бұрын

I have a 95 s-10. has a long rod 406, afr heads, full roller, 350trans, ford 9 inch, ladder bars, when done, should make around 700+ hp, and 600+trq. street driven. very nice truck you have sir. #teams10

@sfcmay1 11 жыл бұрын

Marcel, Sounds like you have a well built S-10, With the right parts in the right places, I would love to see pics or a video of you S-10 especially the underside, I don't know how I made it without my Ladder Bars, they really help along with my Ford 9" rear end with 370 gears, moser axles and Eaton Posi Locker, Have Fun with your S-10 and than you for your comments on my S-10. #team 10.........."S10's Forever"

@juniormakanas2170 11 жыл бұрын

very nice truck and sounds good

@dalani22 9 жыл бұрын

Waaaaay too much yellow, add some black... but nice build dude forsure

@KenaiFlyer 9 жыл бұрын

absolutely bad ass!!!

@sfcmay1 11 жыл бұрын

Flow Masters, I now have added Cut Outs for a louder more Radical Sound, This will be in my next video, Thank;s for your comment my friend and have a great day!

@trevorwilson5461 6 жыл бұрын

works like shit for a 383 stroker.got to be the heads he cheaped out on.or something.no more than350 hp to the wheels .I've owned5 different383 and 2 different377 in s 10 ,rangers and 2 chevelles.that didn't impress me.nice truck.

@johnnytidwell9860 6 жыл бұрын

looks like a parts Bragg to me I put my built bored 96 s10 up against it any day my truck will spin you around in the road in 4 gear at 50

@calebjaymes9710 5 жыл бұрын

6:15 nice

@michaelprice1228 5 жыл бұрын

Not a fan of the yellow.

@josephheath8670 9 жыл бұрын

You sound like George bush brother

@johnnytidwell9860 6 жыл бұрын

it don't impress me factory 350 with 375 horse heads that is not a 383 stroker I had on in a Camaro that would eat that thing up I put my 4.3 against it any day an break his heart

@user-ge2qn6gp4o 4 жыл бұрын

You're a moron and you're full of shit.