Sounds to me like a well built 355 with a solid lifter cam.. music to my ears..

you should go rice hunting with that little pickup

Makes me remember my old thrown together 67 Velle. AFR headed 355 with a monster cam. Sounded like a pro mod lol. Went low 11s on motor in my 4 door.

my dad couldn't find a transmission to handle his motor in his 88 Chevy c10, it has a 400 small block with a bore and upgraded cam, and a stall converter, and roller rockers and he can smoke the tires all the way up our road. that 355 is BEAST! you've got a tire eater there, great vid!!!!

New sub here ....im now building an s10 with my son as we speak so im all over all the youtube s10 videos ....gotta say great build n nasty pulls ... Ya did an amzing job building the brotha ... Thumbs up n kudos to you ...well done my friend

Is it just me or does it sound like the valve train sounds like two skeletons fookin on a tin roof?

Love the setup.... simple but tuff 💪

2021 This is what I'm talking about, eight cylinders, the crime of a small engine, super powerful and fuel economy.. well done

it sounds so effing good.. reminds me of my 355 sbc in the back seat in my 65 corvair (crown conversion) 461x casting heads 2.02's .. 292dur flat tappet 540 lift 106lsa ..750 carter afb on a tm1 edelbrock single plane manifold..

Man, that must be a blast to drive.

I’m late this motor is nice 🔥

Looking good. Getting these to hook up can be a chore.

Man I was hoping you'd race the sti and 5.0

I LOVE IT !! THATS WHAT I WANT IN MY 94 B4000 (except a 307 5.0 engine & tranny) *rear-end aswell.

My father's v8-350 conversion could rip in every gear, the rear end in a S10 is so light it's almost impossible NOT to tear up some tires and pavement with every gear shift! He had to refab the front end just to handle the weight of that engine, I think he had about a half inch of space left at the firewall! He chopped and tubbed the rear end, that thing was crazy! Nice sound, keep tearing it up!

The truck runs strong, built right. I like.

This motor is bad ass 💪 bro sounds amazing 👍 👍 love the way that stall sounds when u cruise then step on it

Do you think you could do another video of your truck in more detail? Maybe a walk around? And may I ask what was the cost to put that engine in? I have a 92 S10 and would like to do a 350 swap in it. Thanks!

What intake manifold are you running? cam? stall converter?Etc, Etc, Etc.

Looks like a fun little truck :)

The beginning you were going down Van Dorn street in Alexandria, VA. I used to live there. Cool truck..

you my friend have badass little truck

Cool man. My buddy has a close truck to that. About to build my 400 small block in my highboy. Clean rig

One day I’m gone build one of these legends 🙏🏾

I had in 1992 a 1965 Studebaker Commander with a engine I built that was a copy of a 1969 L79 350hp 327 4 bolt main and a 3 on the tree. This video is the closest to what it sounded/acted like. Except it wound to 8500 no problem and didn't miss thanks to the marine ignition I had. I ate up big blocks in stoplight races like you wouldn't believe. The final nail was I was at a light against a 1969 396 Camaro and we launched and I broke a valve spring at 7500 and subsequently a valve and destroyed the whole engine in one instance. Wish I still had that car.

This is my favorite v8 s10 video of all time. It’s just so fucking violently powerful with just a 355 with how light the SOB is.

That s10 is a beast

I love it, that's some crazy shit right there

hey i'm building a 355 what kind of heads do you run and what power do you think your making?

Nothing like the sound of a high revving small block Chevy

Not bad at all, my wife's old 355 would pull 7500rpm shifts on a regular basis,,, in her 75'Vega with a T5 world class, and 3:80 gears,, fun, fun

now thats what im talking about!!!!! ive been trying to find an idea of what people see as true power and a comparison to my supercharged v8 s10. we would have close race. any idea on dyno numbers?

I must watch this video once a month..especially during winter when my s10 is away..

sexy engine noise, i wish my sbc sounded that good!

When I was a much younger foolish guy I owned an 85’ S10 so that dashboard and gauges bring back memories

I'd love to have one of these as a daily driver. Will they run ok on pump gas or do you need to find a non-ethanol station?

I recolonized that stretch of 395 in Northern Virginia. Cool

This video is old but I still have to say i couldn't quit grinning from ear to ear this entire video .

S10's And S15's Are Kool Lil Trucks...

That response is really nice when you gunn it, nice work. Keep posting

BEAUTIFUL.

Beautiful.

Hey man love that beast of yours!!! Question for ya, what is the rattle/tapping noise when you are cruising along? My SBC does it too, thinking its normal for roller rockers?

where do u get that fender trim it looks so good

LOL, I thought you going to do the pull in the parking garage! Now that would have been epic!

Badass, my dash looks like that. What year is this one. Looking for a 350 to put in mine

nice!!!! looks sweet rides!!!!

Sounds strong sir 👌

That engine sounds so funny and sudden!!

what gears are you running I have a 355 3 speed at 70 mph I'm hitting 4500 rpm what's your like

where did you get that slick looking steering wheel?

That thing pulls good

Is that some serious valve tapping going on, or gear to gear timing. Just curious what the tapping was?

This is a goal of but instead a 350 would love to see more about this s10 if it's finished

Iv got about the same set up in a 3400 lb 78 grand lamans.half back car Run's low 11s.th 400.360 SBC.. Runs10.40 on 100 shot..sounds good man

No blow by on the mustang or Subaru?

Sounds like a Sewing Machine! LOL!

No one has asked what cam you are using ? What is the gear ratio as well?

What all is done to that motor? And also where you in 3rd gear when you where cruising at the end

Wow I see you had patriot Freedom heads in this video. Question did you ever have issues lining up the gaskets to the ports on the heads? I have the same heads right now and I can’t get the gaskets to line up properly. Almost like the bolt holes and ports are correct. Any input is appreciated if you remember lol

damn rippin, ol boi.

Nice pull. Post more details of your build.

really good sounding engine but why left off the gas like a straight shift

what a beast

pretty bad ass in my book

That Boy pulls hard

i’m buying an 88 s10 with a 350 bored 30 over with a big comp cam and headers, do i need to get aftermarket gears for the rear end?

what's up with the torque?? I would assume your cam is designed for way up top

Badass man just badass....

The county sheriff in his v6 charger “ I am speed”

I’m guessing you’re running about a 4:11 gear ratio? She gets up quick and spinning 3k RPM while cruising. Had a 65 ElCamino that I threw a 12 bolt 4:11 posi axle in, along with a Muncie close ratio rock crusher 4 speed. Then I mildly built the little 283 small block that was in it, I’d guess it was pushing 310hp. It would get up so fast, just like this little s10 does, and it’s cruising RPM was about the same 3k.

What gears do you have in the rear end?

good lawd have mercy!!

7000 RPM.... 💪🏿

yep val;ve float and way wrong gearing but the rod to bore ratio is golden almost perfect

any good running sbc in a Itty bitty s10 or s10 blazer makes them skoot. I've got 1991 s10 blazer with 4.11 gears and sbc with comps big mutha thumpr cam. it's great and sounds nasty

was hoping you were gonna play with that stang on the highway..sounds good though!

Looks like it pulls hard! RPM's never stopped climbing. What rear gear are you running? 3.73?

Sounds good

Where'd you get the air filter?

I'm putting a 454 in a 1994 s10 any advice on motor mounts

I wish I could pop my hood to see your masterpiece.

Now that's how to get on the interstate highway!!

How much power are you makeing in it.

BADASS!!!

That things aggressive as hell! Thats bad ass. I got an 01 xtreme im debating how I want to replace the 4.3 vortec. This is inspiring. I couldn't imagine my truck ripping like that damn!

My buddies brother back in the day had a 69 z28 he bought brand new and that was a very similar sound it almost scares you when you wind them up that tight omg it's gonna blow up at least the first few times anyway the first time it's quite unnerving and disconcerting that Camaro was just straight nasty he taped a 100 dollar bill to the dash and would say get it it's yours when I tell you and when he snatched 2md no way no one ever got the hundo lol small block Chevy has always been the best bang for the buck a small package w a big pot[ of done right build it right wind it tight

Good truck bro

S10's and Luv's need Powerglides or really wide rubber on the street. Personally I like the PG to keep the tires narrower for a more sleeper appearance.

That things cool man 😎

That's what I'm talkin about, nothin else sounds like a high revin carbureted v8

😂😂This video reminds me of my high school days!

Nice truck , think I would put a bigger air filter system on it , that bad boy needs to breathe.👍👍🏁

Is it gonna cause oil starvation when you rev over 6000 rpm?

Depends how u build a engine how the max rpm will be

Nice wiring job

What was this engine setup?

Dammmmm that rips

Where did you buy your dash carpet

Sweet sweet music!