SAB Panel Liner Review + BMC Comparison: Which Should You Buy?

Рет қаралды 18,789

3 жыл бұрын

A review and comparison of the SAB and BMC panel liners.
SAB 패널라이너 리뷰하고 BMC와 비결해보기! 어떤 제품이 더 우수 하나요?
Support us: / frostedsnow
Newtype Affiliate Link: newtype.us/frostedsnow
Instagram: / frosted.snow
Tiktok: / frosted.snow
Kugdai: / kugdai
Watch the SAB panel liner unboxing:
• 1/72 The-O, SAB Panel ...
Watch the Resin Basics series:
The Resin Master Trailer: • The Resin Master
01. Resin Basics Intro with Kugdai: • RESIN GUNPLA for Begin...
02. Resin Pre-assembly: • HOW TO BUILD RESIN GUN...
03. Resin Clean-up: • CLEAN RESIN PARTS - Ho...
04. SD Jesta Full Build Completion: • Video
05. 1/60 Guncannon Full Build Completion: • 1/60 GUNCANNON: Trash ...
#gundam #gunpla #sab

Пікірлер: 129

@frostedsnow 3 жыл бұрын

Heya everyone! If you don't see the panel liners on Newtype yet, just wait a tad for it :)

@scottle4085 3 жыл бұрын

Just bought the 0.2 and 0.5 I can’t wait to try them out!

@frostedsnow 3 жыл бұрын

@@scottle4085 Awesome!! Enjoy em :)

@j_cruz_56deuce26 2 жыл бұрын

@@frostedsnow have you tried Dspaie , they are really good price and would like to see a comparison or if you have used them know your thoughts .

@talkingtoaschizophrenic1171 3 жыл бұрын

The ending with Kugdai was amazing. I could feel how hard he was trying while also getting frustrated.

@frostedsnow 3 жыл бұрын

He's a trooper!

@fkylw 3 жыл бұрын

He's trying so hard and doing so well. I respect his passion and effort! Great video as always!

@frostedsnow 3 жыл бұрын

Thank you so much!

@kevinkerlin5603 3 жыл бұрын

At least he is trying to explain what he’s going to do well it’s nice he’s willing to do this

@frostedsnow 3 жыл бұрын

He enjoys talking about this kinda stuff!

@JoeySchmoey2 3 жыл бұрын

I've been checking Newtype literally everyday since the last video and I watched this one right after I finally put in my order and now I'm even more excited! I've had about 4 kits in my backlog because I wanted to line them and now with your inspiration I can try to tackle resin kits too. Thank you both for the video and for your hard work.

@frostedsnow 3 жыл бұрын

Oh you have! Luckily you didn't have to wait too long. Enjoy the chisels :)

@john1100111 3 жыл бұрын

Hello! Sharon and Kugdee. Hope that you are both well and your family's. The items that you get for free is wonderful for you both. The hobby is expansive. And with your reviews of the items that you get we can then make up our own minds weather to buy them or not. And makes buying items easier. Thank you both for the reviews. You have both sold me on buying a set of sab panel liners. As better the tools will always make the building easier. As i will keep supporting you and buy from newtype. As to keep the program going. As you both do wonderful and professional work. Thank you both for another wonderful program. Wishing you all the very best for now and the future.

@frostedsnow 3 жыл бұрын

John, your messages are always so lovely to read. The hobby can really get expensive indeed! Thank you always so much for your support.

@thebigbient8736 3 жыл бұрын

Been waiting for this and you know I used the link! Thanks frosty and cookie! Good job cookie! English is getting better everytime!

@frostedsnow 3 жыл бұрын

Thanks for waiting and using the link!! You're awesome! Kughee is still studying English bit by bit everyday :)

@thebigbient8736 3 жыл бұрын

frostedsnow no problem! :) love you guys! Plus, Im pretty sure we wouldn’t be able to get them without you guys so thank you!

@flechman63 3 жыл бұрын

Thanks for the update on the SAB scribing tools. Used your link and got a whole set on order.🙏

@frostedsnow 3 жыл бұрын

You're welcome! And you are just superb. Thank you so much for using the link on a whole set! Enjoy em :)

@Vicari0us_YT 3 жыл бұрын

Kugdai is getting better fast! Thanks for the very informative vid, keep up the good work!

@frostedsnow 3 жыл бұрын

Glad you enjoy it!

@NoctisGundam 3 жыл бұрын

That ending, kugdai is so cute! XD

@frostedsnow 3 жыл бұрын

Lol and I'm just like -__-

@NoctisGundam 3 жыл бұрын

@@frostedsnow HAHAHA! Both of you are amazing!

@shadowedsnipa 3 жыл бұрын

Just bought some of these with your affiliate link and I can't wait to try them out! Thanks for the great video!

@frostedsnow 3 жыл бұрын

That's really awesome of you! Thank you. Hope you enjoy the liners :)

@ShadeszOfficial Жыл бұрын

This genuinly was super informative! Great video!

@dobiqwolf 3 жыл бұрын

The ending of the video was great, much respect for the effort.

@frostedsnow 3 жыл бұрын

Glad you enjoyed!

@frannyfranfrancis 3 жыл бұрын

Thank you for the review! Im working on resin kits now and this is the step I'm at!

@frostedsnow 3 жыл бұрын

Perfect timing right!

@Sirmoshi1 3 жыл бұрын

love the Video I think Kugdai really sells me on the SAB ones with the feel of them in the hand ,he is also getting much better with his english :)

@frostedsnow 3 жыл бұрын

Thanks Anthony! We really think they are a great quality product. He's working hard on his English :)

@johnlanger7852 3 жыл бұрын

I love your videos, you always bring a smile to my face.

@frostedsnow 3 жыл бұрын

Thanks so much John!

@K.buildingthings 3 жыл бұрын

hahaha love the bloopers at the end!!! thanks again for the honest review

@frostedsnow 3 жыл бұрын

Glad you like them!

@perezjos002 3 жыл бұрын

Thank you for recommending these chisels, the BMC chisels have been sold out for a while and I saw this video. When Kugdai said these were better than BMC, I knew I had to get these, and wow am I glad I did. They are so easy to use. thank you for the recommendation! And I am a big fan of you and your husbands work. I aspire to be on that level one day lol

@frostedsnow 3 жыл бұрын

You will get to the level you want the more build! Enjoy the journey :) oh and so glad you like the chisels!

@andrewmcintyre794 3 жыл бұрын

Really great review! Definitely seems like SAB is the way to go

@frostedsnow 3 жыл бұрын

Thanks Andrew!! We're big fans of the liners.

@TyronePinson 3 жыл бұрын

awesome review! i think the real difference besides the dimensions of the handles is that BMC is heat treated where as the SAB is not, this will probably play a factor on how long the scriber will last. Kugdai's English is getting better! keep up the good work xD

@iTsAznThunder 3 жыл бұрын

Does the BMC being heat treated make them better in the long run?

@TyronePinson 3 жыл бұрын

@@iTsAznThunder heat treated means it's definitely harder. I guess we will see over time. I have a bunch BMC chisels and I just ordered my first saab chisel to try it out. I've been using a lot of madworks chisels lately. mainly because BMC chisels cost and arm and a leg and they stopped production recently and who knows when they will start again. I find the old madworks line is better and sharper than the new tungsten madworks chisels. they are easy to find and they are dirt cheap. cheers!

@yowaitwhat 3 жыл бұрын

Um. Yes. Thanks for the informative video!!

@CV-xf6lj 3 жыл бұрын

Great video as always I've been thinking about get a set of scribes to customize and clean up panel lines on my kits. Might have to get the SAB scribes since I got some sausage fingers! 🤣

@frostedsnow 3 жыл бұрын

Good timing! Yeay!

@Leonidas_L._Lionheart 3 жыл бұрын

Wow! That one take at the end! Nice one ^^

@frostedsnow 3 жыл бұрын

Haha, thanks! Improvement, right?

@Leonidas_L._Lionheart 3 жыл бұрын

Absolutely 👍

@jokyng 3 жыл бұрын

Nice, I need to give this a try. I did come across lines that I find weren’t deep enough. This should help.

@frostedsnow 3 жыл бұрын

Glad it was helpful!

@gunpla_kang 3 жыл бұрын

that last part though.. "iam going to pretend iam building. tell me when" 🤣❤🤙

@Alucia0 3 жыл бұрын

These do seem extremely nice and well made. I expected them to be expensive given the quality but 300$ at a discount is outside of my price range sadly.

@shadowgouf 3 жыл бұрын

I have to say Kungdai made some really good points, I'll have to get some SAB they may feel better in my hands. Also hi Kungdai!!

@frostedsnow 3 жыл бұрын

If you have big hands and don't wanna buy holders, it'll be better to hold. And Hello from Kughee! :)

@Gunplahrazzi 3 жыл бұрын

Nice 👍 I need some

@frostedsnow 3 жыл бұрын

It's good stuff!

@TheSilentsama 3 жыл бұрын

Kugdai : the bmc feels more sturdy and heavy duty Also kugdai : my wife ( me ) broke my bmc

@frostedsnow 3 жыл бұрын

I know right lol

@maxman4948 2 жыл бұрын

My BMC 0.15 broke when it dropped. But I bought all size from BMC Zero to 1mm. For me, BMC is still the best. some brands are chasing BMC, Like LINE MASTER and SAB

@tommytsunami5773 3 жыл бұрын

Sweet shirt!

@frostedsnow 3 жыл бұрын

Thanks!

@Shogunelite 3 жыл бұрын

Awww Kugdai outtake =)

@frostedsnow 3 жыл бұрын

@1trufaith 3 жыл бұрын

Just started building HG gundam kits to start with. Practicing panel line colouring next.

@ulrika8198 Жыл бұрын

Hi, I'm new to the hobby because G_Witch got me into this 😂 but as a beginner I have a couple of questions: 1. When should I panel line with a chisel? 2. If I'm not going to paint the kit, is it okay to use the chisel and then use my preferred panel lining marker? Even if I will only stick to the G_Witch Gunplas for now, it's always awesome to see your channel.

@pyromaniack13 9 ай бұрын

1. Whenever you want to make the existing panel lines, bigger/deeper, or if you would like to create new panel lines 2. Yes, you don’t have to paint. You definitely should.I’m apply a topcoat before adding the panel lining though. So scribe new lines>topcoat> panel lining Bro, my second kit was a master grade, and I fell in love with them. They’re magnitudes better than the hg kits. I have still built a few hg kits though, just to spice things up

@dannyx1991 3 жыл бұрын

아죠시.. 연습 많이 하신 거였구나... 아마존에서 산 중국산 패널라이너가 너무 구려서 BMC 물량 풀리길 기다리고 있었는데 SAB로 해봐야겠네요!

@nickdom4406 3 жыл бұрын

Awesome review snow! If you or Kugdai were only to choose 3 or 4 panel liner sizes for your tool kit, which sizes would you choose? and tell Kugdai to stay classy ☕️😆

@frostedsnow 3 жыл бұрын

Hey NickDom, it really depends on what kinda kits you build. 0.15 for HG, 0.2 for MG. Then, look at the largest lines you will ever scribe on your kits, ex: if you plan to do large scale resin one day. I'd still just buy at 0.5 or below though, cuz in a pinch, you can use a 0.5 to scribe each side of a 1.0 panel line and get away with it, if that makes sense!

@nickdom4406 3 жыл бұрын

@@frostedsnow Thanks for the info 🙂 yeah makes total sense. I went with .2, .5 and 1 as a starting point. Mostly build MG and got into resin recently so pretty excited to try these out.

@sam_yang Жыл бұрын

Was looking at BMC but then that price really killed me. I then looked these up and got 4 of them. I guess now I know I made a pretty good choice.

@yomama8212 3 жыл бұрын

I’ve been using 0.3 as my go to 😅😅. Time to lower it down then. Also it’s literally impossible to get BMC in australia :(.

@frostedsnow 3 жыл бұрын

if you feel okay with 0.3 ,it's okay!

@josephlozano1274 Жыл бұрын

Do you know what is the size tip for RG? In particular the Sazabi :)

@Razento25 3 жыл бұрын

0:25 Been telling everyone the 0.2 is the go to! lol

@frostedsnow 3 жыл бұрын

Yes!!

@farside8045 4 ай бұрын

Where can one get practice plastic to pratice scribing? Great vid btw!

@frostedsnow 4 ай бұрын

Junk parts!

@K3ns4i 2 жыл бұрын

Hi guys, what do you think about the ones from DSPIAE?

@phat_gunpla_etc 3 жыл бұрын

what widths chisel do you use for panel lines? to make the original deeper

@frostedsnow 3 жыл бұрын

mentioned in vid!

@user-qe2kq4xi4q 3 жыл бұрын

Cute Cookie ~

@frostedsnow 3 жыл бұрын

He is! haha

@wylankaochari5588 3 жыл бұрын

i just got ascriber so this will be good

@garethmurphy8235 2 жыл бұрын

Does the Madworks MultiFunction tool hold these chisels??

@user-og8sp1yg3d 3 жыл бұрын

PG 사용할 페널라이너 세 가지만 추천해 주세요

@frostedsnow 3 жыл бұрын

PG는 메인으로 .3이나 .4정도 쓰실거에요 ^^

@user-og8sp1yg3d 3 жыл бұрын

@@frostedsnow 감사합니다

@pedro16043 2 жыл бұрын

Sería genial subtitulos en español

@griffmcdaniel2186 3 жыл бұрын

What type of tape did you use? Can you get it at any hobby shop in korea or do you have to order it?

@frostedsnow 3 жыл бұрын

pretty much any hobby shop I'm not particular about the brand

@phat_gunpla_etc 3 жыл бұрын

what is the typical size for stock panel lines? i just want buy one tool to increase the depth of the panel lines

@frostedsnow 3 жыл бұрын

I used the 0.2 on the MG tallgeese in the video

@phat_gunpla_etc 3 жыл бұрын

@@frostedsnow i want to pick one size so i can deep the panel lines of the kit...i don't want to add any new lines..do you prefer .3mm or different widths?

@psycommu36 3 жыл бұрын

Does anyone know how to paint clear parts? You might be asking "Why not go to reddit?" because I am too lazy to read the answers. What I'm doing is painting the clear parts of the SDCS Phenex and I am using neon fluorescent paint, I am not doing it now but I just need to know how to do it.

@frostedsnow 3 жыл бұрын

Just airbrush it like you would normally with no surfacer and I use a clear top coat

@unclephilipps674 3 жыл бұрын

how does it compare to Madworks? Lol! Haven’t tried both SAB and BMC. But Madworks is more available in the South East Asia region.

@thebigbient8736 3 жыл бұрын

They dont lol

@frostedsnow 3 жыл бұрын

Have never tried Madworks before!

@ramonaugustus9470 8 ай бұрын

BTW NEWTYPE DOES NOT ship international as of August 2023... the increased shipping costs after the pandemic have become exorbitant...

@ramonaugustus9470 8 ай бұрын

yall still think we should have locked our selves in our homes...LOL all the economic issues, fuel, food, travel..etc... collateral damage yet everyone is quiet...

@Gunplahrazzi 3 жыл бұрын

Yooooooooo woooooooot

@joelm1246 3 жыл бұрын

Went to Newtype and looked at buying 0.2 and 0.6. The shipping to Australia cost more than the two items. 🙁

@frostedsnow 3 жыл бұрын

Sorry to hear :( The owner is working on bringing it to non-US citizens, but the chisels themselves will cost about 50% more than on Newtype after amazon fees and so on. I will share on my social media if it's available in the future.

@pyromaniack13 9 ай бұрын

Geez, the pressure on those poor chisels

@theRx 3 жыл бұрын

General scribing chisel question: Once they start wearing out, do people resharpen them, or just buy new ones?

@thebigbient8736 3 жыл бұрын

These dont wear out too easily, bmc last a lifetime. Sab probably the same. You can resharpen them if you wanted but you need a specific tool if you dont want to risk ruining the angle. But could probably be done without if really careful . Tool is hard to get though outside of japan.

@SAOS451316 3 жыл бұрын

there are sharpening jigs meant for regular size chisels and even big lathe tools and they should work just fine for small tools like panel liners. as long as you set the correct angle and keep the tool from getting too hot it should be fine.

@frostedsnow 3 жыл бұрын

We don't and haven't heard of ppl in Korea resharpening them. We just keep using it

@theRx 3 жыл бұрын

@@thebigbient8736 Good to know! My dad's talked about needing to resharpen woodworking chisels, so wanted to make an informed purchase.

@xerxes931 3 жыл бұрын

first

@frostedsnow 3 жыл бұрын

You beat me!!

@alentor 3 жыл бұрын

Hello, I have a friend who is studying in Seoul, I'd like to order Mr hobby & gianotes for myself and have him ship it to me, Could you please recommend a website from which I can order such things, also I'd like to order the chisels which you are promoting, Thank you in advance ;)

@frostedsnow 3 жыл бұрын

You can search Hobby Factory or Neighbor Hobby Korea for paints and tools/kits. chisels are here : smartstore.naver.com/globalgoods

@alentor 3 жыл бұрын

@@frostedsnow Thank you, you are awesome!