Ep. 22 The ultimate performance cruising catamaran - lightweight with superior strength in aluminium

Рет қаралды 48,804

3 ай бұрын

Become a patron, / elcanoworldchallenge
If you want more information on the Odisea 48, 55 or 62 then send an email to peter@elcanoworldchallenge.org
The Odisea 48 from Odisea Catamarans has just started to get built in Vietnam. The design is complete, the paperwork has been done and now the factory has had 4 days to start the job and they are welding like madmen. Finally the wait is over, the Elcano World Challenge will begin in 2024 people.
If you would like to help the project along then become a patron and get access to exclusive content.
/ elcanoworldchallenge
Give it a thumbs up if you liked this episode!
Get your Sailing Into Freedom Crew T-shirt:
teespring.com/stores/sailing-...
If you would like to support with single donations click here - www.paypal.me/Plukky
Check out some gear we have on the boat:
Inverter
www.amazon.com/Xantrex-PROWat...
handheld radio
www.amazon.com/Standard-Horiz...
(As an Amazon Associate I earn from qualifying purchases and I greatly appreciate your support!)
Also follow us on -
Instagram: / sailingintofreedom
Facebook: / sailingintofreedom
Our website: www.sailingintofreedom.comGive it a thumbs up if you liked this episode!
Get your Sailing Into Freedom Crew T-shirt:
teespring.com/stores/sailing-...
If you would like to support with single donations click here - www.paypal.me/Plukky

Пікірлер: 198

@daveamies5031 3 ай бұрын

I never saw coastline like that in Vietnam before, thanks for showing us a bit of Vietnam that normally doesn't get seen 👍

@stefanieobermeder2065 3 ай бұрын

Thankyou for putting your life on the line for those whom are to simple enough to appreciate the welding/building/troubleshooting of your vision…

@Petervandiessen 3 ай бұрын

Nice to see you are doing things to relax a bit Peter! Was nice chatting with you the other day and remember I'm eager to help with the internet stuff! Take care and good luck with the editing!

@wildandbarefoot 3 ай бұрын

Thanks for the Paragliding bit. Yes, it does break up the engineering monotony, reminding us of the freedom of spirit thats got you to this place.

@bushymt 3 ай бұрын

Plucky , your answering my questions as I'm thinking of them, stop reading my mine its freaking me out ! keep up the great videos mate.

@SV_Aroo 3 ай бұрын

It's a pleasure to watch such skilled craftsmen work. Not a DIY project.

@fulltimber 3 ай бұрын

Yes Peter, welding inside the hull plate along the horizontal ribs and vertically on the frame segments first is paramount to keeping the outside edges of the shell plates perfectly aligned. And after that's done, they can go back to the outside joints , grind the tacks down smooth and flush, then grind a " U " into the seam down to the root of the weld behind or the edge of the backing rib or frame. This ensures that the cover weld bead is properly penetrated sufficiently so the strength of the structure is not compromised when any stress or impact occurs. Any impact would only most likely put a dent in the shell only where isn't a rib or frame behind it. The exposed weld bead will most likely be ground flush and faired if required by the engineer. The tricky part of all this is maintaining a weld sequence to not overheat the aluminium to ensure any distortion endured by the shell plate in areas where no rib or frame behind will not cause dishing. If this happens, an amended weld procedure must be made to avoid dishing , but still keep the original intended strength of the structure.

@albertfunk1176 3 ай бұрын

Lots of welding nags and pilgrim step welding if necessary. A heat dissipation paste can be applied parallel to the weld seam.

@maverickmyrtlebeach 3 ай бұрын

I used to weld steel plating, fairing etc. LNG , container and barge in Quincy Shipyard yrs ago. Confirming aluminum is a lot harder to work with than steel. Thx Fulltimber your post said it all . I never worked with Aluminium, looking at the tac spacing I see now why there closer... thx.

@SAILINGintoFREEDOM 3 ай бұрын

Yep. That's the plan.

@dskofich 3 ай бұрын

@@SAILINGintoFREEDOM Love the updates Plukky

@buffalo241 3 ай бұрын

Looking forward to seeing that boat in the water. I absolutely enjoy the boat build process. You keep building and we'll keep donating.

@dellingson4833 3 ай бұрын

The boat is huge and is a beautiful piece of aluminum art.

@papachuck6007 3 ай бұрын

the build is fascinating week after week. its incredible what that crew can do with aluminium stock, an english wheel and a welder. hope to see it in person next year.

@michelbedos9371 3 ай бұрын

I love seeing and hearing your explanations of the steps involved. The flying is a nice touch, so we get to see you back in the air and view the surrounding terrain.

@JeanViljoenJeanViljoen 2 ай бұрын

The build is going super well!

@CopyCatGarage 8 күн бұрын

I love how you said... "I probably shouldn't be doing this but then a gain this is not the Wisdom Channel." or something to that effect.

@dennispatrick4999 3 ай бұрын

Plucky, it seems like the Quality Control is there. Fantastic. You will have one hellofa Sailing Yacht.

@robertsmith2402 3 ай бұрын

Totally absorbed in the building process - Sheet metal fabrication is an art and the engineering skill going into this build is fantastic. Cant wait for the next update.

@jellybeanjay 3 ай бұрын

Are you sure you’re not building a tank, wow so so many ribs thank you for your videos👍 this is coming along fast

@goldenacres3269 3 ай бұрын

I am quite intrigued by the process of tack welding on temporary supports then removing them. That is similar to the multiple tack welds you were describing as support for the interior continuous weld that get ground off. Neat process.

@braithmiller 3 ай бұрын

🎉 Excellent, something got you out in your element.

@nealchristensen1793 3 ай бұрын

It was way better after watching 3 time's !

@Rodrifuuu 3 ай бұрын

Wow! Almost there, Plukky!

@leadreviewer3257 3 ай бұрын

Great video the boat's looking amazing

@SailingREHAB 3 ай бұрын

Cats looking GR8 M8.. Awesome Flying sesh at the end. Hope its all going well. 🙂🙂

@lolawilson5817 3 ай бұрын

Cool Video! thank you

@user-fd4pt5nb3v 3 ай бұрын

Keep up the great work n video. Jeff the Navy vet

@TammyBillings-qt1ve 3 ай бұрын

Awesome video

@robsouthwood2519 3 ай бұрын

I really like to see the raw view of your wandering camera. It is refreshing for me (as an engineer) to see the rapid pace on the shop floor. I see the trade off between “meticulous early design" and “just build it and make it fit”. I suspect the next hull will come together even faster.

@BernardOuellette-mf5rv 3 ай бұрын

Thanks.

@comfortablynumb9342 3 ай бұрын

She's starting to look like a boat. A nice wide and big one. I can imagine what the water will sound like slapping the hull. Seeing yours fitted out and sailing will be really cool. Buena suerte Plukky, cuídate amigo.

@8marcrara11 3 ай бұрын

Goodonya Plukky!🤙🤙🇦🇺

@VonBluesman 3 ай бұрын

Plukky I want to sail on your new boat. The only video skills I have are from years ago when I taught golf lessons and used a camcorder. 😂. I have owned at least 12 fresh water boats & can be one of the best dingy operators you have ever had. 👍😎🙏🏼✌️

@nackinoo1750 3 ай бұрын

Nice to see you out of the factory, doing something else!

@andymarr7610 3 ай бұрын

Incredible workmanship. 👌👏👏👏Loved the Be Free bit , probs not intentional. He is an awesome and capable sailor, great you tuber too. Tomas is a good egg too🇩🇰🇦🇺

@ColoradoMikeC 3 ай бұрын

Nice to see a little ridge soaring! fun little section of hill to fly. I know you kite, but you might give wing foiling a go.. It's awesome and easier to deal with than kiting once you figure out the foiling.. It's like crack! So fun! You'll figure it out quick.

@SAILINGintoFREEDOM 3 ай бұрын

I tried once i sucked big time

@ColoradoMikeC 3 ай бұрын

@@SAILINGintoFREEDOM It's honestly the hardest thing I've ever learned to do mainly bc our wind sucks and the water is cold where I live (dry suit cold most of the summer), but once you get a few sessions, it starts to click! Sooo fun!

@davidpeck8351 3 ай бұрын

Nice wing work at the end, you seemed to have a near close encounter with a shrubbery at one point. Here in the states if you had made contact with it you would have been..."bush wacked"!

@ianh2674 3 ай бұрын

You looked in your element with the kite and near the water Peter. Thanks for answering one question i had about all the outer tack welding.

@ae7v 3 ай бұрын

This boat build is very interesting to me and coming along quickly.

@waynereiffenstein7153 3 ай бұрын

I wish you'd warn me when they're about to weld...dammit, now I'm blind in one eye, and not the other..yet...oh well...I'll just have another damn beer. Good to see the progress Plukky. Cheers from Canada

@thomasg1323 3 ай бұрын

That is going to be an amazing boat. Beautiful.

@Why2why 3 ай бұрын

Ive already got my spot peter im so excited i can't wait

@guvmntout 3 ай бұрын

Keep up the good work Peter.

@tomtice6103 3 ай бұрын

Wow, you’re SV is really starting to shape up. Loved the time in the air🤙🏽😃✌🏾

@billyjames7735 3 ай бұрын

love the build videos it is good to see you have a little fun as well Plukky

@robertbuckley3582 3 ай бұрын

Indeed nothing but quality

@hedleyjackson5131 3 ай бұрын

Some project getting the joins to avoid ribs and stringers to facilitate internal welds hats of to them

@pemman 3 ай бұрын

It's coming along. Nice one Plukky! 😊

@chrispy104k 3 ай бұрын

Thanks for the update Plukky. Boat is looking great.

@rickinmi 3 ай бұрын

I dig the fabrication stuff. I've done some aluminum welding. Mostly TIG. The paragliding is cool as well. Especially because it was sketchy! Lol... I'm recovering from sketchy right now and can't wait to do more... lol!

@trevhedges 3 ай бұрын

Cheers mate..😊

@jamespollock994 3 ай бұрын

Enjoying the build watch. Cheers mate

@BTCxyz369 3 ай бұрын

Wow 💘Beautiful Lines 👌 What a Great team of Craftsmen you have Pluckstar 🙏

@MsMixd 3 ай бұрын

She is really shaping up into a beauty. I bet you're getting quite excited. Im launching my cruiser in a couple of months after years on the hard, so I know how you must feel.

@stefanieobermeder2065 3 ай бұрын

It’s going nana be a BEAST!

@mikehancock6280 3 ай бұрын

Liked , subscribed , commented.

@MrGelitube 3 ай бұрын

Looking great🎉

@seafuryphil 3 ай бұрын

Looking great

@kristaready8812 3 ай бұрын

Love the e tra content Plukky. Nice beach you found. "This isn't the wisdom chanel people" 😂😂😂😂😂luv it 🤗💞

@burlingtonbill4687 3 ай бұрын

Going to be a great sailboat, Peter. Looking forward to the adventure! Burlington Bill busking on the road and here on you tube. Currently in New Mexico.

@SAILINGintoFREEDOM 3 ай бұрын

I need a new song Bill. Something like my first super catchy one with whistling

@burlingtonbill4687 3 ай бұрын

@@SAILINGintoFREEDOM We are on the road working our way home from a winter in the Southwest. When we get home, I'll work on some songs.! Best of luck on your great adventure!

@nooneanybodyknows7912 3 ай бұрын

Kiting 🪁 nice!

@tim31736 3 ай бұрын

Love it, Love it, Love it!!

@eamonncoady9823 3 ай бұрын

Great to see you getting a bit of time off. ❤

@mennoboon8037 3 ай бұрын

Nice to see the work they are doing, its pretty massive right? Also nice flying did go pretty high there i think with not that much wind.

@konanjaarola2511 3 ай бұрын

i swear with every one of these build vids i watch i reckon your nurries must be hanging lower each time .... bloody legend plucky da pluckstar ... thanks for the vids...

@keithmurray5791 3 ай бұрын

Looking forward to see the actual finished product in the water and how the noise problem gets solved given it's practically 2 tin cans in the water..

@blairbeattie3308 3 ай бұрын

What a beast of a boat

@rickjames8887 3 ай бұрын

All quality people!!👍👍👍

@robbylafont 3 ай бұрын

The boat will be a beast

@DavidLee-pu3ji 3 ай бұрын

Another GREAT episode !!!!

@nigelrindal6073 3 ай бұрын

Love the build videos have to admit I also love the kite videos it’s a great mix top stuff

@PeteHuntley 3 ай бұрын

Cracking, keep them coming.

@jonathanscott550 3 ай бұрын

The Cats really coming along. Question once the haul is done will the interior wiring ect be done same building or moved to another location? The kite flying at the end was awesome and it looks as though you came close to the trees a couple times. Keep the videos coming Peter cheers

@oleran4569 3 ай бұрын

Great choice of music!

@MyNameisPuddintane 3 ай бұрын

Your new boat will not be complete without Captain Lisa.

@danieloliver20 3 ай бұрын

Plukky, tell Mark to buy you all another round! The boat is really coming together Mano! 👍😎

@JasonButterfield918 3 ай бұрын

I believe I will apply.

@webheadusa9377 3 ай бұрын

I imagine the grinding marks on the outer lower hull to be the water movement as the boat sails forward. Yeah, streamlined like a dolphin, only this boat will not have to bob up to breath. Will the dolphins be jealous of Peter's ODC48? :¬) Webhead USA

@SAILINGintoFREEDOM 3 ай бұрын

Noice

@Jonas-hz3nd 3 ай бұрын

Great to see the progress! I am thinking of the black soot though, when welding aluminum typically indicates incomplete or improper shielding gas coverage 🧐

@capttom7772 3 ай бұрын

PETER; I saw on YT where you are in the "TOP 10 SAILING CHANNELS" ... ... you're "#10" ... ... but, I bet soon to be "#1" ... ... Peter; look for a email from me soon.

@FegrusMojo 3 ай бұрын

Great to see you back in the air again mate!

@SAILINGintoFREEDOM 3 ай бұрын

FERGUS!

@stephensidaras7416 3 ай бұрын

I like the building stuff.

@jbird73 3 ай бұрын

Sick cam footage! Yeeew!

@TonyK3130 3 ай бұрын

They tell you not to watch how sausage is made; but, this is awesome!

@adventurebound2923 3 ай бұрын

way to go pluk!!! cant wait for freeedooommmmmmmmm!!!!!!!!!!!!!!!!!

@quillibrium-dk6jz 3 ай бұрын

Been following for a while, but right as I start planning a 100% aluminum pontoon boat build, you start showing me all this. I'm rivetted, or maybe welded? Love this series. My project is 100x more simple, but I can still steal some tips. Thanks!

@DanvilleTrain888 3 ай бұрын

Ahoy Plukky!🏴‍☠🔱🦈

@paulpence8895 3 ай бұрын

Moving fast!!!

@nickcooper14 3 ай бұрын

You must be rapt with the speed in which the guys are moving. congrats on getting more boats built. She looks like a tough design....

@kolingro3776 3 ай бұрын

PlukStar Amazing......

@michaelhoran407 3 ай бұрын

April 14, 2024 Hi, The You Yubers of “Sailing Delos” channel are also building a Devilliers design, New Zealand passage making aluminum hull sailing catamaran. 😊

@jasondohery3128 3 ай бұрын

2 issues, the Orcas eating rudders, and the exczpe hatch windows leaking or popping out. I would love to be one of your crew, but I'm 60. so I;ll be with you in spirit.

@hydewhyte4364 3 ай бұрын

Gotta say i'm looking forward to the new sailing vids of the future, but I'm kinda missing the dirt poor half sunk sailing of the past. Think I'll go pull a nostalgia marathon. Anyone have a playlist of the best of the worst of the old vids?

@NguyenTrung-jh8ef 2 ай бұрын

Vũng tàu city ❤❤

@alanbutterworth4219 3 ай бұрын

😂Gosh Peter, I haven't really seen another video of yours since you were spearing fish with the South American babe during the plandemic. Are you having an aluminium cat built? Did you win the lottery? You were one of the few that inspired me to start looking for a boat to sail away from this madness. Then the fifth dimension smiled upon me and I'm currently completing a 40ft cat that sadly its original builder died during the fourth year of his build. I'm working hard to try and get her in the waterby September of this year and then cruise her down to the Med for winter. The original builder designed it as a power cat with two 60HP outboards. I'm completing it as a total solar boat, no sails, 6kW of solar panels, two 45kwh LiPO4 banks, one per hull and two 15kW electric outboards by Aquamot. It already has two 250l petrol tanks so I'm going to carry two 2,2kw petrol generators just in case, but want to run it all from the sun if possible. Maybe see you around in a few years.

@Roskellan 3 ай бұрын

Paragliding - I did hang gliding. 1986 I landed in the sea, another story.

@clide427 3 ай бұрын

Plucky screw the subscribers, keep the build going, it's incredible...to put it in perspective look up lifeproof boats their a aluminum rib style pleasure boat they are way different yes but it'll take 2 years for a build they said...so look up the difference it's insane how quickly yours is going let alone others as well... being there to judge the quality would be a no-brainer, brilliant ... 👍

@KennyP88 3 ай бұрын

Got to be honest here Pluckmaster, lack of anyone else there to support you has me wondering. Can you get through this on your own? I hope you have a mess of folks lined up to share the work, when she gets out of the shed. Real curious as to where you’re going to be doing the finishing out too. ❤

@Stenn333 3 ай бұрын

Did you rent the sail wing locally ? I still, after all these years of following you, am amazed at your breadth of ability and experience ! 😯🙂

@uptone12111 3 ай бұрын

All of this makes me wish I would have learned how to Is weld❤

@tedsmith6137 3 ай бұрын

I'm trying to work out where the dagger boards will fit. Can't see any clue yet. Years ago, I read Thor Heyerdahl's Kon Tiki Expedition book. The raft had 3 (?) dagger boards, the use of which was unclear. During the voyage, they found that pulling up one would alter the course by 2 or 3 degrees, so they seemed to be used for fine tuning the course.

@CraigOverend 3 ай бұрын

If you make the boat kite powered you can race SP80.

@ottisthedog3544 3 ай бұрын

Liked! Subscribed!! Commented!!! a saw blade on an air grinder thats gotta make a mess! good to see the girls are back. all this responsibility has got to be getting taxing. are ya longing for the good old days where the biggest problem was where to get the next bath/bucket shower?