salad bowl part two

Рет қаралды 10,453

3 жыл бұрын

In this video Ronald Kanne (woodturner in the Netherlands) shows you how he makes his rough dried bowl into a fine salad bowl. This video focuses on how to use the gouges.
About Ronald Kanne
Ronald is a wood turner in the Netherlands. He makes commissioned work and his own free work. And every week turns out to be a little too short to get all the work done... He also runs a webshop for other wood turners. It's called: www.dehoutdraaierij.nl. This webshop is in Dutch, English and German. The website that contains his own work is called www.ronaldkanne.nl. You will also find these links in the video.
Tools used in this video:
Bowl gouge: dehoutdraaierij.nl/en/shop/se...
Parting tool: dehoutdraaierij.nl/en/shop/ch...
face shield: dehoutdraaierij.nl/en/shop/pe...
Stronghold chuck: dehoutdraaierij.nl/en/shop/se...
Dovetail jaws: dehoutdraaierij.nl/en/shop/ja...

Пікірлер: 39

@charlesnichols1215 Жыл бұрын

I always enjoy the way that you share your knowledge and humor. Your camera person is always a great source of enthusiasm. Be sure to listen to your canine consultant to stay on track and accurate.

@edwardukleja4583 10 ай бұрын

I have just watched this video, you make it look so easy. Perhaps with a lot more practice I will find it a bit easier.

@Winterbourne_wood_turning Жыл бұрын

I like your channel because you demonstrate without using high tech tools. I also like the banter you have with Lisse, doing the filming. I also love your workshop ❤️

@ronaldkanne Жыл бұрын

Well, thank you Stephen.

@ericburgmeijer6288 3 жыл бұрын

Mooie schaal Ronald! Conifeer is heerlijk hout om te draaien, het werkt weinig en die terpetijngeur is ook fantastisch.

@nickorgan5883 3 жыл бұрын

A wood often viewed as being low quality, ends up as a beautiful and useful bowl. I'm interested to see your new finish on the bowl. As always you explain what you are doing in a clear easy to understand and relaxed fashion, keep up the great work and cant wait for the next project/video.

@assynt 2 жыл бұрын

Nice job Ronald. A well explained process for us turners with less experience. I enjoyed the journey.

@ronaldkanne 2 жыл бұрын

Thank you! allways nice to hear!

@utubeboris Жыл бұрын

"So you see, making a bowl is very easy, even I can do it" Well that boosts my confidence knowing your experience 😜

@ronaldkanne Жыл бұрын

Haha!

@GeraldJensen 3 жыл бұрын

Very good video! Thank you.

@raydriver7300 6 ай бұрын

I thoroughly enjoyed that. Thank you for sharing and a happy new year to you and yours 🌞

@ronaldkanne 6 ай бұрын

Thank you Ray! Wish you a happy New year too!

@IgnacioDias 3 жыл бұрын

Mate you are giving a lot of valuable information, I really appreciate it, thank you very much and I hope this channel grows because you deserve it

@ronaldkanne 3 жыл бұрын

Thank you for your kind words!

@frankdelange540 2 жыл бұрын

Dat tooltje voor het aftekenen van de voet gaan we natuurlijk ook even namaken onder het mom van beter goed gejat dan slecht bedacht….. En wij maar meten gister bij je in de cursus 😂😂 Weer wat geleerd!!

@Bitten50 3 жыл бұрын

Great video, really helpful. Thank you 😊

@ronaldkanne 3 жыл бұрын

And thank you for sharing it Bitten!

@Diver7atms 3 жыл бұрын

Ronald, you are the best

@ronaldkanne 3 жыл бұрын

You're the first to say it, so I think you're exaggerating a bit! :-)

@Diver7atms 3 жыл бұрын

LOL, you make it look so easy. I have only been turning for several months but I pick up a lot of things from your videos. And they are enjoyable to watch.

@patminister4414 Жыл бұрын

Thank you a most excellent pair of tutorial videos i saw in the comments that you normally wait 10 to 16 weeks and longer depending upon the type of wood. But was left wondering how you tell if it is dry enough, do you do it by weight loss or do you have some electronic tool that measures the water content of the wood

@buickkootje 3 жыл бұрын

Aha! Een aha-momentje! Daarom kreeg ik de happers (13:40). Achteraf gezien ook logisch, maar, weet alles maar eens achteraf.

@ronaldkanne 3 жыл бұрын

:-) Mooi!

@frankvanderwal4571 3 жыл бұрын

Hi Ronald, Lies. Always a joy when I receive the message from KZfaq that a new video is available. Many thanks for sharing and giving useful hints and tips along the way, with a touch of humor: “... developed together with NASA...”. Priceless! As asked by Jeroen how long did the bowl needed to dry? I need some planning to do for MothersDay... :-) Thanks and stay safe! Frank

@ronaldkanne 3 жыл бұрын

so you think that was a joke!?!?!? :-)

@frankvanderwal4571 3 жыл бұрын

@@ronaldkanne No, I thought I spotted your device bolted on the NASA Perseverance just landed on Mars a couple weeks ago!

@thk2789 3 жыл бұрын

Hallo Ronald, wieder einmal ein sehr Schönes und Informatives Video, vielen Dank. Wo bekommt man den Meterstab zu Kaufen??

@ronaldkanne 3 жыл бұрын

Danke! Die Zollstocken sind Bestellt. Bald im Webshop erhältlich!

@ceciljanise2318 2 жыл бұрын

Ronald.. how much do you charge for a bowl like you just made?

@ronaldkanne 2 жыл бұрын

That'll be app. 60 euro . Depending on size, amount and wood. Most of the time 1 bowl around 80 euro...

@johnmitchell1614 2 жыл бұрын

Hello Ronald, that was most interesting video again. I noticed you using a little magnetic light on a hollowing job you did. Can I ask where you got it?

@ronaldkanne 2 жыл бұрын

I buy them per 250 pcs... and sell them on my website...:-)... search for magnetic sewing lamp on google. Grtz

@johnmitchell1614 2 жыл бұрын

Okay thanks, I will do that. Best regards.

@TheTinyWorkshop 3 жыл бұрын

I'm working on a walnut bowl. And I also have a lot of tear out on the inside. See if I can get rid of this now with your tip. (If I dare, because I don't want a catch 😕) And as an alternative? Use sealer and then sand a lot?

@ronaldkanne 3 жыл бұрын

I bet you had a catch by now... :-) Sorry for my late reply. Walnut is a very easy to work wood, so if there is tear out on the inside i'd say it is because of technique or the sharpness of the gouge...

@TheTinyWorkshop 3 жыл бұрын

@@ronaldkanne I think both. I am practicing on various pieces of wood that I still have. I suspect that I am too late with sharpening. So when I think about sharpening, I am already too late. 🤔😬

@jeroenvangeenen5878 3 жыл бұрын

Hoe lang heeft de schaal te drogen gelegen?

@ronaldkanne 3 жыл бұрын

Deze schaal was erg snel, met dank aan het type hout. een week of 10 was het al droog. Tussen de 10 en de 16 weken duurt het doorgaans. Afhankelijk van het hout, de omstandigheden en de temperatuur...