Ours has just decided to deflate in the same spot after 2 years. Couldn’t for the life of us figure out what to do! Thank God I found this video! We will try this and hopefully will solve the issue. So appreciate you for posting this!

Don't use Flex Seal. I fixed a hole in the wall of my hot tub with it and it couldn't handle the warm water and failed big time.

This video was super helpful!!!! It also appears they have a huge defect !!!!!

Thanks for the tip. Not much info on this or why those air vents are really necessary. I used permatex ultra black gasket maker that I had left over from when the heater element of this device started leaking. Put it in and let it cure for 24 hours. Filled with air and it's holding. The heating element fix was more challenging as you had to take apart the whole pump system.These spas are cheap but need some work to keep them going. I've only had for 2 years and have had to do some big time repairs. Still going though.

thanks for this video, i've been having the same problem and couldn't think of where to start. thank you so much for this, i can now get to work fixing mine

Hello, had a similar issue happened with mine just recently....what you showed in in the video at the end is exactly what happened...got PVC CEMENT and waiting on it to cure but when i blew air into it you could hear it where it was coming out from same thing like yours...but wow these products are flawed...

The little upper and lower overfill valve on the top and bottom mine was leaking as well. They started just leaking a little then eventually failed until the air chamber filled with water. I am considering just sealing off both valves as well.

Can you come and fix mine? I had an air leak and then took it apart to blow it back up and got water leaking and had to drain it, still didnt find an air leak.

Same happened to mine

I wonder how long this will hold up. I'm having the same issue with mine. I'll probably be trying a repair soon. Thanks for posting the video.

I have the same spa same brand same problem however mine is blue inside, I never see it anywhere on eBay or Amazon, just white inside. I got a hand air pump 10 bucks , tired of unhooking the water to air it up a little, for me problem solved.

our tub is brand new out of the box all connected and upon filling with water it started leaking underneath ..and we can't find where lol

I had the air seal leak behind the filter as well. Some guy said he fixed it with JB weld I guess it wouldn't hurt to try. I ordered a new tub when I got the new tub inflated. I got the leak in the water side of the heater. So its taken apart. I'm wondering if I could spray flexseal on the corners of the heater. Otherwise it's take each end off of the heater, clean it, clean the gaskets, put it back together, and hope it works. It seems like a real pain in the ass. We've only had it up and running for 3 months last fall. And all this happened when we went to it inflate again for this winter. I don't know if it's worth buying a new motor if it's just gonna happen again. I've already spent two hundred and thirty on a replacement inflatable tub. Good luck. As much as we loved having it up last fall, I don't know if it's fixable.

My hot tube is having the same exact leak problem from the gasket and water is leaking from the inside of the tub into the liner through that filter housing due to a failed gasket, just like you identified here (so thank you!) . Your video ends with you planning to cut a circular patch and seal using rubbing alcohol and then PVC cement. Do you have a follow up video where you did this? Curious to know if it worked.

I’m draining mine as we speak. There is a little water around one side near the pump on the outside of the hot tub. Yet the pump seems dry and my hot tub is still fully blown up. When it’s empty I’m going to check if I have a small hole. The water is low but I haven’t used it in a while. Any thoughts?

I have the same problem

dripping out of my air hose Only when it is not pumping air

Great video! My bubbles aren't working, and I do see water under the pump. Any advice?

Did it work? Can you use flex-seal?

Did you fix it? Mine is doing the same thing!

My air seal is damaged and it's hard to reach. Anyone have any tips?

I just discovered the same issue. Did you ever repair it?

Same problem. Did you fix work?

What did did it work

Can't see nothing for your flashlight shining on it

This tub design is a joke I DON'T RECCOMMEND buying one

Maybe buy a real one