Nice vid mate!!! ❤️ The cost of living is getting higher per sec...People are complaining about employee wages and it's the more reason to start your own business. Even if its something small, make yourself your own ceo... Nevertheless, Investments like; (Gold, stocks, crypto, buy shares nd other assets) are easiest ways to accumulate money.

That Doug D sample was freaking hilarious too!

I love the banter between you and Rich 😂

1.15M subs and dudes are still fixing cars on the floor without a lift..That’s what I call dedication

Never thought I would be subscribing to a chicken farmer, damn 2021 has been weird!

Proof back yard mechanics can still get things done.

"I prefer my poultry humanely raised..." What aren't you telling us Sam...

Dude this is one of the most interesting builds. I agreed with everything you have done to this car including getting rid of the air suspension awesome

The hidden jokes just get better and better my friend.

How a filter looks doesn’t matter. The flow rate matters. Any reputable manufacturer should have the flow rate available. Compare that against the spec on the Aston Martin filter to make sure it meets the requirement. Then change it regularly.

Sam, the entertainment value of your video is excellent, my face always hurts at the end from smiling so much. Thank you.

100% agree with the removal of that air suspension. Bringing it back to stock is the best way to go at this point with it, and it'll make the interior look so much nicer!

Project Farm would have done a proper test on the filters.

The only way that rooster would be edible is pressured cooked.

The FRAM looks like the oil would bypass the element all the time, regardless of pressure, so for me, that one still loses.

Awesome video, learnt so much today especially with the oil filter. I always wanted people to rebuild a wrecked Aston Martin but after you were explaining how much the parts cost I can now understand why nobody’s wants to rebuild them 😅

5:46 "I'm going to switch to a breaker bar". Picks up a ratchet. Stay you, Sam.

That air system in back of the AM looked a lot like it could've started out life as a Moonshine still. Better off with that gone and forgotten Sam.

OMG what heathen would destroy the rear of an Aston Martin with such a hack job to fit air ride. This has been a very informative repair, I think the 2 best parts were the clutch and the cooler on the front, Keep up the good work Sam.

All the parts we see under the car are really built with love for engineering in mind. Great that you found a way to buy parts for a reasonable price so these cars will get a second life in the hands of the tech savy.

Hell yeah a new video, I hope to see the Aston finished and “modded” back to a better than stock configuration. Which would be better than now in my opinion since the air ride just doesn’t fit withe car.

You're right about Rich. I had to give him MY BMW i8 rebuilt engine display components just so he could complete the Supercar project he started a year ago. I captured this in the latest video on my channel. 😥 So sad.

Great video again. Loving the Aston. I love the bants between you & Rich. Can't wait for the next video.

Best refurbish you have done. Great job on taking it back to stock!!!!

Always cool to see people work on AMs 👍 Just for you to know, if you fill up the car with oil "normally" (car is just sitting and you fill it up till it shows full on the stick) it is massively overfilled. The car has a special dry sump with a reservoir underneath the aluminum tank. The propper way to do it is shown in the owners manual (idelling the car for some time at a specific rpm). Just want to keep you from trashing the engine 😉

The kick out to Rich and Doug legit made me laugh. Thanks, I needed that.

Liked and already subscribed. Excited too to see you drive this. Great job making stock.

Great video as always love the Aston Martin being from the UK myself and would hope to own one some day looking forward to the next video always entertaining and factual keep up the great work and videos 👍😎🇬🇧

If you buy that jump box they have $30 coupon. Seems like great deal..

It wasn't running off the battery or jump pack. Once it started it was running off the alternator.

Glad to be part of the 1 in 3 people.

Really enjoying this build. So glad it's going back to stock.

Now Rich is going to say that your rooster plays a bigger role in your videos than you do. And he'll say it in a very dry way.

Thank you Mike, Sage, and Sam's brother for fixing Sam's car. When you gonna get crackin' on that forgotten Ferrari?

Hey man been watching you for a while and just wanted to say I love your energy keep up the hard work

Well done with this one 👍 everyone moaning about aftermarket parts, well Aston is a car that built their cars new with after market parts and still managed to make a classy car! Still one of the best looking cars.

I purchase a good quality filter every time, I can't justify risking thousands on engine repair/replacement by saving a few dollars on an oil change, same goes for the oil. I'm sure you'll be fine with OEM mfg, but I need the peace of mind.

Those wheels are a great improvement - great job!

Loved that oil filter analysis! Nicely done.

We sure make a good sounding quality car in uk.... Enjoyed watching you repair it.. Well done

"Cheap disposable oil filters do not have enough pore density - basically they contain too few pores. As a result, the pores clog quickly. Once an oil filter gets too clogged up, its bypass valve lets the dirty oil through to the engine. It’s better for an engine to get dirty oil than no oil." It's like a quality HEPA filter for your indoor air. There are cheap Chinese versions that look and feel the same but perform quite differently.

Always used Mann on my AMG's

That’s awesome. 🤔 might look into buying one of them for transmission jobs

*@ **12:04** - your magic battery booster dropped from 86% to CRAZY 64% after just one short engine start --- WHAT A PIECE OF JUNK!!!!!!*

Stepmother has no problem taming the rooster..at least that's just what I heard.

Eh, I'm still gonna buy the Mann filter. It's $15 and it would give me peace of mind without having to worry about it

Great rebuild Sam.

The consistency 🔥

"Hire three or four people," that's Rich, literally. Aston Martin, now owned by Mr. Stroll.

It's been too long since we've seen Step Mom...

I love this series Sam, great job

Great video Sam!

The Demuro insertions had me rolling!

Good trick on getting that stupid splined lug nut off. But that was not a "breaker bar", that was a rachet.

One of the concerns with the aftermarket filters is the bypass pressure valve. The Aston uses a very heavy oil (10w-60) and is believed to have a relatively high force spring on the bypass valve. I'd want to know that the other filters have the same spec.

Great video!

I just hear Rich right now doing that evil laugh ... 😈😆

Does the oil filter have a silicon anti-drainback valve? That's one of the most important features of a good oil filter.

I love these videos Sam ! Sometimes they Crac me up !

Smart choices, put it back to stock as much as possible. Air ride is usually high ownership cost in the long run, so 86ing that is a no brainer. I think you're doing great with this build.

Love that you just gave a how to on stealing wheels, now anyone can steal my custom wheels.

Well, its almost finished so that is the last we will ever see of the Aston... RIP Just kidding Sam, love the project and the jokes. Keep it coming. Speaking of which, hope stepmom is doing well.

20:26 Brilliant word-play, Sam! And yes, it is a pretty "Assed-in Martin"... 🤣🤣🤣

A man after my own heart. As a mechanical engineer that hates waste and excessive cost, I appreciate his solutions and have been known to do similar things to keep it in budget without compromising safety or reliability. Also he is mostly a cow farmer, not a chicken farmer(by weight) . He probably prefers cow pies to chicken pot pies.

Awesome channel,, Awesome build.. Awesome car!! One of my Favorites! Wanna donate it to a Hardworking Medical Helicopter Pilot when finished??? 😁❤

i would like to know a little about the farm (without getting too personal) and how he came to be there.

Ready can't wait for the next episode. :)

Great video. Well done with your repairs.

The Rooster is wondering where Cory is.

Putting a $1 filter on an Aston is needlessly tight-fisted. Any middle of the road branded / oe spec filter is fine though.

When I worked at belle and discount tire, we would just lay the socket flat on the floor and hit the end of the socket with a hammer and the nut will come out after just a few hits. Super easy

I subbed to Loius roosssmannnn for his board repair and now he is basically a New York real estate channel. As for Rich, very disappointing, it used to be about the wood panels on the inside of an old van, now it’s all failed V8 swops and right to repair videos. I subscribed because I was truly surprised by the value for money this channel offers. Car repair at no extra cost. Screen to desk with no middle man and I didn’t have to give up on a V8 swop to watch.

If you actually believe that little jump did anything other that get the engine to start, you should consider another line of work.

Thank god for the original shocks and wheels, put the car back to factory, please do a proper job repairing the body work where the previous owner butchered the poor thing. 1 like = 1 prayer for Rich Rebuilds

The test you could do on the filter cores is to time how quickly a measured amount of oil takes to pass through it. To do the test you would need to have a pleat count and total media area before starting. You would then cut out a section from each filter to test uniformly.

Small point. Cars start off a battery. Once started, they produce their own electricity. You can even disconnect the battery. And revving high enough the battery is actually being charged. And those things sticking out of the gearbox (or diff in conventional RWD cars) and spinning are called stubs.

Imagine watching this episode, late at night with the volume loud, with 3 guys laying on the ground struggling to put the transmission back together, while a rooster crowing in the background? I immediately switch to hetero porn...makes more sense to explain.

Wow! I'd use any of those filters except the Fram. It literally just allows oil to bypass unfiltered constantly? That's ridiculous. That other brand is Pentius, by the way, and their filters are generally fine. I'm a big Wix fan myself. Purolator is good too.

The the roof liner dyed and die the dash thread too. Take all that colour from the interior and take it back to black. That would be the sweetest ride if you returned it back to stock then did a full paint correction to get it immaculate.

Sam is the real hooptie king

Oh now we can't wait until Sunday for Rich to throw back at Sam about ICE T🤪

Where are you. It's been 2 weeks and nothing. WTF!

Butcherbox, that was one of the smoothest segues I have ever seen. Well done Samcrac.

I am a big fan of your step mom and the rooster in the background. You are entertaining. 😆

When you and Rich first started going at it in your videos I thought it was serious passive aggressive beef lmao

"HONESTLY MOM, I'M NOT GONNAH BUY ANOTHER CAR!!!" [10 minutes later] "Hey mom, can I borrow some more money???" *click*

My dads 1995 Ford Mondeo had exactly the same key as your Aston does. Mann oil filters all day long for me. Either Mann or Bosch get rebranded as the dealership oil filters here in Europe.

Coming along nicely!

I was going to ask “what the heck was the previous owner thinking” when they did all of those horrible “mods”…….then I realised he clearly wasn’t thinking or never had the ability to think in the first place! 🤣

WHER ARE YOU! ARE YOU OK? DID YOU QUIT KZfaq!

The relief valve opens a lot more than you'd think. When the oil is cold it is thick enough to not readily pass through the paper and the bypass opens then. Oil filters mostly catch oil sludge and wear particles as that is what is in the oil. If the engine has been apart then sealant and gasket bits might get captured. If you dissect old filters you'd see very little except sludge lines in the pleats of the paper. If you make the filter paper have finer particle capture then it is harder to pass oil through and the bypassed oil is greater so there is a balance point of filtration size and more unfiltered oil flow. Bigger filter can have tighter paper but many engines have no room for larger filter.

Great video again Sam 👏 no step mom this time, great oil filter section 👍🏻

19:45 you will never be able to see the difference in the filters. When you lookup Wix filters specs they have different filters that are in the micron range of 12-30. You cannot see that with the naked eye.

Hope you keep the aftermarket wheels, just have them painted silver or black and they’d look nice

I actually seen that video with the oil filters when it first came out. Almost every car I own or have owned have been Fords and when it comes to oil filters that's all I buy is motorcraft the same with the air cleaner. Someone else had did a air filter test and it showed how the other brands of filters fell apart after a short time and how the motorcraft filter stood up to everything they threw at it. Apparently the other brands do not use a good base that holds everything together. With the oil filters I was taken back that Fram finished almost dead last. That had always been my go-to filter for any other brands of cars I have owned. I saw in the comments from the last video about people talking about the $1 filter. A lot of people don't get it when it comes to RockAuto. They only try to hold on to stock parts for a certain amount of time. If that type of motor and other parts haven't been in production for 10 plus years they want to try to recoup some of the money they have in inventory. I have already seen from myself parts for my expedition that has gone from $175 all the way down to $35 within 6 to 8 months. If you sign up for their newsletter enter in your cars all of them once a month or so you will get a email telling you these parts for your car are now on clearance. You just will not believe how cheap some of the stuff is. I have already pot different things like wear and tear items that I just did not need at that time yes they have them here because of how cheap they were and if I were to never use them I'm not out a lot of money and I can always go online trying to sell them or give them away. You definitely made me a believer in that jump box. When the first ones started coming out that small I had some bad luck with them and could not even start my Harley with one. So I have stuck with the big ones that's about the size of a car battery. I want something small and compact and since all of my vehicles are each cylinders I need something it's up to the challenge. Like always enjoyed your video look forward to see the final one for this car.

How was I not subscribed to this great channel? Thanks for the PSA Sam

"It doesn't have the exhaust on" "It sounds great!" Straight pipe it?

I'm enjoying this series but I CRINGE everytime I see that car on those jack stands. 😬 yikes. At least get a maxjax it's even portable.

The compressor tank in the cargo area is priceless. Real classy.

Great video thnx for the filter education.