Samsung Galaxy S8 Screen Replacements and Repair Parts: bit.ly/2qOR3g7
Samsung Galaxy S8 DIY Repair Tools: bit.ly/2lzLIop
Watch the Official Samsung Galaxy S8 Display Assembly Repair Guide. Following the step-by-step Galaxy S8 screen replacement instructions we have provided will help you safely fix a cracked or damaged 5.8" Super AMOLED display. Visit Fixez.com for all of the DIY Samsung Galaxy S8 replacement screens, parts and tools you need to fix your phone quickly, and affordably.
If you need your S8 smartphone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST.
Subscribe to our KZfaq Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
Samsung Galaxy S8 Display Assembly Repair Video Steps:
Step 1
• Power down your Samsung Galaxy S8 phone.
Step 2 (Samsung Galaxy S8 SIM Card and MicroSD Card Tray)
• Eject the SIM card and microSD card tray.
Step 3 (Samsung Galaxy S8 Rear Glass Panel)
• The Galaxy S8 rear glass panel is glued on solidly and is a tight fit within the frame. Apply heat to soften the adhesive.
• With the precision knife create enough space to insert a playing card.
• Attack the adhesive and carefully dislodge the rear glass panel from the chassis.
• You will need to disconnect the very short fingerprint reader cable from the motherboard before completely moving the glass out of the way.
Step 4 (Samsung Galaxy S8 Fingerprint Reader)
• Use the spudger to help free the Galaxy S8 fingerprint sensor from the adhesive securing it to the rear glass panel.
Step 5 (Samsung Galaxy S8 Antenna Assembly and NFC/Wireless Charging Panel and Loudspeaker Array)
• Remove the following 14 Phillips screws.
• Spudge up the antenna assembly that includes the NFC and wireless charging panel.
• Easily pop out the lower antenna and loudspeaker array.
Step 6 (Samsung Galaxy S8 Motherboard)
• Starting with the battery, disconnect the bevy of cables from the Galaxy S8 motherboard.
• Use the spudger to detach the daughterboard connector on the underside of the motherboard, then extract it from the Samsung phone.
Step 7 (Samsung Galaxy S8 Battery)
• The S8 battery is firmly adhered in place. Use a spudger to muscle it free from the adhesive securing it to the smartphone.
• After a brief struggle out pops the 11.55 watt-hour (Wh), 3,000 milliampere-hour (mAh) Galaxy S8 battery.
Step 8 (Samsung Galaxy S8 Daughterboard that includes the Modular Headphone Jack, USB-C Port, and Microphone)
• Remove the following 5 Phillips screw.
• With the spudger in hand, extricate the daughterboard from the midframe. It includes the Galaxy S8 USB Type-C port, headphone jack, and primary microphone.
Step 9 (Samsung Galaxy S8 Sensor Array, Earpiece Speaker, Front-Facing and Iris Scanning Cameras and Vibrator)
• The next component to surrender is a front-facing sensor array that contains the status LED, the IR emitter and camera, and the proximity sensor.
• Remove the S8 earpiece speaker, followed by the front-facing and iris scanning cameras.
• Extract the spring-contact-connected vibrator.
Step 10 (Samsung Galaxy S8 Volume and Bixby Buttons Cable and Power Button Cable)
• With the tweezers in hand, remove the S8 volume and Bixby buttons cable, followed by the power button cable.
• The button covers are trapped within the outer case and can’t be removed.
Step 11 (Samsung Galaxy S8 Display Assembly)
• Begin to free the 5.8-inch S8 display assembly by using the heat gun to warm up the sticky adhesive.
• Use playing cards to attack the adhesive securing the Super-AMOLED display to the S8 frame.
• Take your time and apply additional heat as needed.
• Once you have sliced through the adhesive, be mindful of the display cable when decoupling the Galaxy S8 screen from the frame.
* To reassemble your device, follow the steps in reverse order.