Рет қаралды 71,599
Hi ** Galaxy Tab S 10.5 Charge port Replacement
Easy steps to replace Samsung galaxy tab S model SM-T800 charging port.
Work around the entire device by sliding the plastic opening tool around the rim.
If this is the first time, it will be hard to separate the back cover from the tablet.
The clips are approximately 5 cm apart. While working around the device, the clips will make a dislocating sound when disconnected.
Remove the back cover once all links have been separated.
Be careful when touching any of the internal components of the tablet.
Place the plastic opening tool in between the outer rim.
Move the tool in a downward motion to separate the 2 parts.
Run the tool along the rim to disconnect all connectors holding the outer rim to the back of the device.
Remove the four 2 mm Phillips #000 screws in the charge
Using the spudger, disconnect the charge port from the motherboard.
www.ebay.co.uk/itm/Samsung-Ga...
Pry out the charge port bracket.
Thanks for watching, hope you like my video .
amzn.to/3dValZq
Mask3 Layers Disposable Protective 50PCS Dustproof Facial Protective Cover Maldehyde Prevent Masks
stay safe