Remove the stand of the old Samsung monitor LS22F350FHWXND. No need to remove the cover. To remove the stand completely, see following video. Thanks to the creator, TruthSeeker. • Samsung Monitor. Remov...
Пікірлер: 122
@dheerajyanamandra36312 жыл бұрын
This is what i was exactly looking for . Thank you buddy
@aaronfaulkner59272 жыл бұрын
Thank you. I didn’t understand the directions that came with it. I thought i was going to snap it or break it. Thank you for your help. Peace
@fabianramos212 жыл бұрын
You came in clutch lol. I spent WAY too long attempting to remove it. 🙃
@TheKittycatCassie2 жыл бұрын
Thank you so much bro, exactly what i needed!
@KITZELJA2 жыл бұрын
Hahaha. People have how to remove the whole back panel, and then there is the correct way which this guys shows. Cheers mate, I was being too gentle.
@johnbastawrous93863 жыл бұрын
Great video. Really helpful. Thanks
@swayze_mane3 жыл бұрын
omg thanks so much for this, it was driving me nuts trying to figure this out
@Sanjayadon3 жыл бұрын
Same happened to me, glad I could help someone!
@BL0NDED2K3 жыл бұрын
Thank u for this, it worked on my old s22c350h
@heckler76892 жыл бұрын
My goodness thank you I’ve been trying to take this damn thing off for about a month to put it on a bracket for the Wall thank you very much.
@mrparadox6878 Жыл бұрын
Thanks man, that was exactly what I was looking for
@Sanjayadon Жыл бұрын
Glad I could help. Post a video with your work!
@heritageroses-dieschonheit17322 жыл бұрын
Thank you! That helped me perfectly!
@wiktorpuciennik24822 жыл бұрын
Dzięki, pomogło. Super mordeczka z Ciebie
@mailtocollins2 жыл бұрын
Thanks man. Very helpful.
@robertvarga46172 жыл бұрын
Hy Sir, Thank you for your video! That helped me!
@yoghurtstripper2 жыл бұрын
If anyone is still struggling with this, I found a way that's very easy for me. Get a flathead screwdriver, pull the neck enough so you can squeeze the screwdriver in between and just pry it off. Very easy!
@mrabalone34923 жыл бұрын
I try this way of removal. They are 2 types, remove panel then remove stand or force it out. i reliase when force it out, there is a internal plastic broken. But it is ok u can still use the stand. Recommend this way of removal. The unscrew panel might damage your monitor. Sacrify abit but will turn out not to damage your panel. thanks Tharindu
@Michaelius11113 ай бұрын
Thank you bro! Also I can say that u can use some flat item as ruler to disassemly that stand into 2 parts, if u are afraid to break the monitor.
@djg40152 жыл бұрын
Wow! Thank you When u started talking about removing the panel, i laughed and said I'm not doing that... there is no way that will end well for me. Then u pointed out the split in the base... And I'm like no way... It worked like a charm! Thank you 😊
@qaarkk2 жыл бұрын
I never realized you could just remove the stand this way, and actually went through and removed the panel… I now have several rows of dead pixels and a lot of regret.
@RobertVanRob2 жыл бұрын
i dont have dead pixels, but my upper frame is on both sides broken :(
@qaarkk2 жыл бұрын
@@RobertVanRob Oh yeah, I have that too, thought it was just some plastic clips.
@florbest893 жыл бұрын
Thanks! You are the best!!!
@quocphuphan19982 ай бұрын
Nice bro, I had a hard time trying to remove this stand, thanks for your vid
@AnotherMetalGuy10 ай бұрын
Legend, I finally got it out
@shoebshaikh24x73 жыл бұрын
Thanks saved me lots of time
@Sanjayadon Жыл бұрын
Glad it helped
@ehaproductions2023 Жыл бұрын
Thanks it helps my concern.☺️
@tharindu72 жыл бұрын
Thanks man! You saved my money
@Trix1m3 жыл бұрын
I was able to do It prying a flathead screwdriver. Thanks
@yelmf Жыл бұрын
Howto remove the stand for this model? Thank you
@peterrahbaek39214 ай бұрын
Thank You Sir!. I have almost a brand new of this screen and have to take it with me to our house in spain next weekend in a bag w. Aplane!. Perfect I just disconnected it like shown in the vid..:)
@pauls.2532 Жыл бұрын
I can't get the connection thing off, I'm pulling so damn hard but it doesn't work
@Sanjayadon Жыл бұрын
Don't pull too hard, you might break the locking mechanism. Better to leave it, if it's too tight!
@sleepy_ember3 жыл бұрын
Thank you so so so so much!
@edornaquelonio3 жыл бұрын
Gracias, pense que iba a romper algo (Thank you, I was thinking that something will be broken) Regards from Argentina
@rufogaray93803 жыл бұрын
jajaja en la misma
@edornaquelonio3 жыл бұрын
@@rufogaray9380 Jajajaja
@steviebeagen4213 жыл бұрын
Cheers saved me some time
@reneruizdelgado30103 жыл бұрын
Thank you very much
@christianchristian95968 ай бұрын
Thank you very much! It helped me very much! Greetings from Austria!
@Sanjayadon8 ай бұрын
Glad it was a help to someone!
@krzysztofszukaa92022 жыл бұрын
Saved me, thanks bro
@CureForIgnorance3 жыл бұрын
Thank you very much!
@tcj13142 жыл бұрын
Thank you so much!
@azizaziz56212 жыл бұрын
Thank you amigo
@swoyampravamohanty27263 жыл бұрын
Thank you!! 👍🏻
@lancenorris94512 жыл бұрын
Mine didn’t work. It broke during the panel removal. I was carful. Disappointed.
@Sanjayadon2 жыл бұрын
Sorry to hear that, probably plastic must have been damaged during the pulling
@rafsunjany50486 ай бұрын
Because you drank Alcohol before remove.
@lancenorris94516 ай бұрын
@@rafsunjany5048you 🤡 Good job. 👍🏽
@silverfox76692 жыл бұрын
Thank you ..it worked
@Peter_Goge Жыл бұрын
Many thanks!!!!!!!
@bigfloppy263 жыл бұрын
Helped me so much
@Sanjayadon3 жыл бұрын
Glad it's helpful for someone!
@itskavkan27 күн бұрын
worked perfectly tysm
@shayleeshocklee69753 жыл бұрын
Thank you! Worked perfectly!
@rustamsabitov67866 ай бұрын
Спасибо. Вы мне очень помогли.
@Sanjayadon6 ай бұрын
Спасибо. Вы мне очень помогли.
@brucepeterleinwand2 жыл бұрын
Prasanth, Tharindu, thank you very much,,,,,, also repacking it ,,,,, you saved us a lot of grief !!!!!, bloody🤞 stupid system
@SonJeEdulianАй бұрын
Thank you so much bro
@AndyYangXD3 жыл бұрын
Use your strength that's it really >
@franksowell38932 жыл бұрын
Thank you!
@Altareiss3 жыл бұрын
There is no screw here to remove the cover ? There is one in the vidéo linked
@Sanjayadon3 жыл бұрын
The screws are to remove the base completely. You can pull the long part using the unlock mechanism without removing the outer cover.
@MatheusCruzChannel11 ай бұрын
Thanks!
@SheltonDCruz Жыл бұрын
Thanks alot!
@17alberto72 жыл бұрын
Pensaba que era imposible, lo logré quitar con un destornillador con punta plana y muy fina.
@Minamisava Жыл бұрын
well this did break the connection, so the original stand is not as it was, but I'm switching to a vesa holder
@Sanjayadon Жыл бұрын
Sorry to hear that. Guess the lock was stuck!
@filippocapasso9824Ай бұрын
thanks a lot !! 👌🏻👌🏻👌🏻👌🏻
@antovelygodoyrivera43742 ай бұрын
Thank u
@davidq37302 жыл бұрын
Si me funciono solo que le deje puesta la base para tener de donde agarrar lo moví de lado a lado para aflojar porque si estaba muy duro
@Sanjayadon2 жыл бұрын
Sí, es bastante difícil. este es el 3er pull, para el video!😆
@Forlong213 жыл бұрын
ty
@vallitacostantini79042 жыл бұрын
tahnks!!!!
@GitanoRenegado3 жыл бұрын
I want to take out the other part so I can mount it on a computer stand
@Sanjayadon3 жыл бұрын
You'll have to remove the cover in order to do that. Try this, kzfaq.info/get/bejne/odmndNyr152maHk.html
@xrewer71793 жыл бұрын
Thx
@GitanoRenegado3 жыл бұрын
I’m having the same problem with this same model
@mateokai.2 жыл бұрын
What is the model called
@ludwigschmidt1185 Жыл бұрын
Thanks man
@danielenicoletti7957 Жыл бұрын
Thanks bro
@johnadams41242 жыл бұрын
Thank you :)
@davidjarzyniecki25803 жыл бұрын
Whenever I try to pull it off it, it won’t come off
@Sanjayadon3 жыл бұрын
Is it the same model? If so, it should. Be careful though. If you are not sure, take it to a repair shop.
@blackbird1634 ай бұрын
Omg thank u we couldn't get ours off 😂❤
@lorenzotricarico31892 жыл бұрын
TI AMO BROOOO
@MicheleBertocchi10 ай бұрын
always handy KZfaq ;D I was about to tear it apart :D
@durgeshpandey2902 Жыл бұрын
Very good
@dwork9978 Жыл бұрын
THANKS!!!!
@Sanjayadon Жыл бұрын
Pleasure!
@KisaraDoesArt2 жыл бұрын
Thank yooou
@zamanyembe54672 жыл бұрын
Mine is not even moving
@Sanjayadon2 жыл бұрын
Try a little shake up first. If you're unsure, take it to a service person. No point if the stand gets broken
@zaminhaidry2 жыл бұрын
Tilt?
@Sanjayadon2 жыл бұрын
Don't. just pull.
@nathanweir80712 жыл бұрын
Love you
@floraliebscher886111 ай бұрын
I tried to remove the last part because VESA wouldn’t fit otherwise. Now my monitor is dead and gone 👍🏼
@Sanjayadon11 ай бұрын
Sorry to hear that. You have to be careful about removing this part
@AshTheDuke2 жыл бұрын
i tried so much it wont come out
@Sanjayadon2 жыл бұрын
push it gently at first. Then try to pull. If you are not sure, take it to a technician
@AshTheDuke2 жыл бұрын
@@Sanjayadon done ty very much
@somnathpaul43815 ай бұрын
I can't remove
@Sanjayadon5 ай бұрын
Is it the same model?
@somnathpaul43815 ай бұрын
Undoubtly
@Sanjayadon5 ай бұрын
@@somnathpaul4381 perhaps there's a different locking mechanism. Better to leave it if you're not sure
@camiloarellano78103 жыл бұрын
👍 Ok
@dionet80052 жыл бұрын
Îm strong 🥵
@argrox4336 Жыл бұрын
The design is so stupid, I was fighting my monitor for 30 mins