Samsung S6 charging port replacement, the easy way

No video

Samsung S6 charging port replacement, the easy way

Рет қаралды 14,073

Күн бұрын

Ebay store: www.ebay.co.uk...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
KZfaq Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...

Пікірлер: 25

@LaptopDisassembly 7 жыл бұрын

Is in it dangerous with the hot glue. If eventually happened again, and if someone tries to open it again it will lift the port with the trucks. Great video as usual. :)

@retrotech2020 6 жыл бұрын

Great video although I would not use hot glue. Place an insulative material between the flex and home button.

@jackiechun99 2 жыл бұрын

10:47 [for my own reference] How to Clean Solder with [Desolder Braid] and [Lighter Fluid] - Samsung Galaxy S6 Charging Port Repair

@bonobel77 6 жыл бұрын

nice, i did it sucsesfully, thanks for your help

@user-kw5lh7cm2p 5 жыл бұрын

Another good lesson. Thank you

@geojor 6 жыл бұрын

good work ...

@zaidal-obaidi5626 7 жыл бұрын

you need to put something under the flex cable rather than damage the home button

@imkawed 6 жыл бұрын

no, hot glue is a very bad idee for the nex technician ho oppen the phone its a nightmare

@jonathanwebb9862 Жыл бұрын

I'm looking at a dead s6 now, trying to get the data off it - I can't see where you're putting juice into the battery as there are no obvious terminals where you're touching, that I can see on the one I have

@Lightofdarknesss 7 жыл бұрын

Hi, how what could be a possible reason for a Samsung Galaxy S6 edge plus with the same problem (not turning on) to have the wifi module heating up with the charger plugged in?

@MyLove4Allah 5 жыл бұрын

What's the name of the liquid you use to clean the port with?

@RussellCambell 2 жыл бұрын

Maybe they need to reconsider putting the button on top of the charge port

@applistest1853 7 жыл бұрын

what kind of flux are you using

@electronicsrepairschool 7 жыл бұрын

www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xkolophonium.TRS0&_nkw=kolophonium&_sacat=0

@simonishvilikaxaber8817 6 жыл бұрын

why not replacing that little board completely? they only cost 4 pounds.. just curious

@danieliussipovic4704 5 жыл бұрын

He said why. Because you have to lift the screen from plastic thing and that way you are risking of braking the screen

@aaronmorling2671 4 жыл бұрын

So you charged someone 60 pound for a used port no fucking words

@SHINdanny 3 жыл бұрын

That was my thought after he took the part from the donour phone, I mean this is a part that faces physical stress several times, every day. I can´t believe it, also breaking the home button of the donour phone... Those parts are still available to buy for some € , it would be reasonable to use part from an old phone like ics, chips, speaker,... but not a micro usb connector ;/

@RussellCambell 2 жыл бұрын

Maybe the customer was desperate for the phone

@rayhowe4354 7 жыл бұрын

That is a mess,using that glue, use super glue fell.

@jadedsoul1 5 жыл бұрын

super glue..dont be foolish. how is the next guy gona get the parts of. such a thin liquid may run onto any array of pins. Hot glue though not perfect is easily removed.

@azeemhosein9283 7 жыл бұрын

You see paying 60 to get a used charging port when its very cheap like 5 bucks for a new one. This is why tech gets a bad name .

@electronicsrepairschool 7 жыл бұрын

you think samsung are selling charging ports? they are selling nothing, no spares. So, you can use a chinese copy or a original second hand. I know the quality of the chinese stuf so i prefer original second hand, no offence

@retrotech2020 6 жыл бұрын

You're paying for his skill to solder it. Better 60 than 180 for a new screen.