Samsung washing machine HE & TE error code heating fault

No video

Samsung washing machine HE & TE error code heating fault

Рет қаралды 139,281

8 жыл бұрын

Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartstea...)
Tutorial: www.how-to-repa...
For this error code you need to check both the water heater or element and thermistor NTC , basically the washing machine is reporting a fault on the heating circuit with this fault code but it is not capable of identifying exactly where the fault actually lies.
This error will be released by turning off power switch.
Display : “HE1"(Over Heat), Display : "HE2", indicating no operation of the heating element.
Check water heating element
Check heater for contunuity
Check thermistor or temperature sensor
Check the thermistor resistance
Check wiring to water heating element
Check connections to water heating element and temperature sensor
tE
Water heating sensor error detected
If thermistor circuit is abnormal, this error will occur. If the thermistor is lower than 0.2V or higher than 4.5V, this error will occur. This error will be released by turning off Power S/W.
Check thermistor or temperature sensor
Check the thermistor resistance
Check wiring to water heating element
Check connections to water heating element and temperature sensor
Please remember to subscribe to our channel
www.youtube.co...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-
repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
KZfaq. / apart4u
Facebook. / how.to.repair.appliances

Пікірлер: 34

@CulinarySpy Жыл бұрын

Thanks. for the video and also for showing test mode in the other video. Our WF1804WPC let out a bit of a smell and a tiny bit of smoke yesterday so I ran it through your test procedure. I found there was no relay click to turn on the heating element and certainly no extra current being drawn by the washing machine when it was supposed to be heating the water. Next step I'll pull the thing apart and test both the element and the NTC Thermistor, but I got a funny feeling I might have to go looking at the heater control circuit board too ... I'll report back!

@How-to-repair Жыл бұрын

could be the really not activating glad we could help you @CulinarySpy this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@CulinarySpy Жыл бұрын

@@How-to-repair thanks - it's not activating and I found there are some burnt out components under the conformal coating on the Main PCB. Not really repairable without detailed schematics of the Main PCB, so looks like I need to replace the Main PCB, around $320AUD. The element measures 27ohm cold (230v/50Hz here in Australia). Not sure it's going to be a worthwhile repair, your thoughts?

@davidwiley652 Жыл бұрын

I had the TE code. I tested the sensor and the heating element and they tested good! But, when I went to unplug the heating element I did notice as soon as I touched the first wire terminal it fell off. I came to a conclusion that was my problem. The drum shook it right off. I pushed it back on and heard it click then put everything back together except the top and back and tested it and it operated like normal, then I put the top and back covers on. Pretty easy fix!

@How-to-repair Жыл бұрын

Really glad the video assist. Did you glad you got your machine back up together glad we could help you @davidwiley652 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@manuelmigueles8348 5 жыл бұрын

Thank you for your video. It's been very useful. My problem was one of the wires. Now, fixed it!

@foxtaylor6436 3 жыл бұрын

instablaster.

@karunanethyvelupillai2606 2 жыл бұрын

@giacomo-p Жыл бұрын

Nice clear videos, Paul! WF1104XBC heater relay clicks on test, but no power to heater 😢 Cabling all good, so I assume relay must be faulty?

@How-to-repair Жыл бұрын

Does sound like it could be the heater relay if you can match it up they will normally only cost you about 10 £15

@jemmalislah1836 Жыл бұрын

Thank you so much. The fault can't be the PTC in PCB?

@laurafernandez3239 8 жыл бұрын

thank you so much we have repaired our machine today !!!!!!!!!

@How-to-repair 8 жыл бұрын

+Laura Fernandez I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/KZfaq. kzfaq.info. facebook.com/how.to.repair.appliances

@shahidfarooq3376 5 жыл бұрын

My dryer samsung.probleb this 5 minutes working and the display indication error.

@masoudmontazery907 Жыл бұрын

Good luck sir

@shafiqmiah6069 7 жыл бұрын

sir model no wf 500nce this machine start and off.please tell me what is problem

@macro3234 4 жыл бұрын

Ta for that..! I have to look at one tomorrow...!! Cheers..!!

@How-to-repair 4 жыл бұрын

Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. kzfaq.info/get/bejne/qKypeqR5u6y5h2w.html&t Stay safe

@ravic.2544 4 жыл бұрын

Ifb digital s 6kg over heating error at display what can I do

@mustaphamarrakech12 7 жыл бұрын

what this 2H error please....think you so much...

@ISHOULDAKNOWN 6 жыл бұрын

MY Samsung WF218/XAA washer gave TE error code. replaced thermistor & heat coil. Didn't fix it. Checked wiring. Broken orange wire at the harness in back. the wire leading to the thermistor. Fixed it with shrink wrap n tape. Anybody need a 7yr old heat coil n thermistor?

@octavianepure1431 4 жыл бұрын

What model number is?

@milanmilic4209 4 жыл бұрын

what does H2 mean? Someone know

@ikotanov 7 жыл бұрын

hi I have this tE2 error you know what is thanks

@youseefsaad2487 2 жыл бұрын

were you able to fix?

@kapilsalve2227 Ай бұрын

HE1 how to solve

@How-to-repair Ай бұрын

Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

@mahmoodkhan6623 4 жыл бұрын

HC error?

@How-to-repair 4 жыл бұрын

Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. kzfaq.info/get/bejne/qKypeqR5u6y5h2w.html&t facebook.com/how.to.repair.appliances/ Stay safe

@valentkusuma8514 5 жыл бұрын

How HE ERROR PROBLEM LG FRONT LOAD

@PhyllisGlassup2TheBrim 6 жыл бұрын

I took off the door ect only to find that my element is not located where the video shows..........

@How-to-repair 6 жыл бұрын

therefore it will be on the back on some models they fitted in another location. Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to- repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances