Great question @global001. You have two ways of connecting your DJI MIc to the Tascam CA-XLR2D. 1st- is connecting the 3.5mm cable that comes with DJI Mic to the 3.5mm jack input on the XLR2D. 2nd- is purchasing a 3.5mm to XLR adapter and plugging that to the XLR input on the XLR2D(make sure Phantom Power is turned off!). As for setting, start by lowering the input of your camera and XLR 2D line input to the lowest it goes. Then once you have good gain on your DJI Mic receiver adjust the input levels of the XLR2D so that your audio levels are not clipping or peaking. I like to have my loudest levels reach somewhere around -12db. That way I leave some headroom in case my subjects gets louder. Hope this helps!

This wouldve been a definite buy for me if they had 192/32 bit rate sonce some of my customers want that bit rate for their audio. I deferred to the tascam portacapture to use with my Canon r5 c since it gave me everything that I need for the current moment.

so with the digital hot shoe on the EOS R's. We don't need to plug in the Tascam CA-XLR2D to the camera's mic 3.5 port?

So we have two R5C's, an A-cam build on rails with the XLR module and a B-cam kept stripped down for gimbal and photo duties. The XLR module ended up being faulty and had to be returned to manufacturer. Would send a low buzz tone though all outputs and get rejected by the camera (red ACC icon) as a supported accessory. Full diagnostics ended up joyless by both us and CVP's repair team. Now we gotta see if getting a new module shipped to the shop or have Tascam repair it is faster. Pretty unimpressed and hoping it was just a bad batch on launch :/ It's honestly less work to just Y-splitter the 3.5 jack from self powered audio sources directly (Sennheiser lavs and something like an NTG 4+) and run one channel -10dB from the other for headroom.

Great video. I’m a newbie to this. How would I connect the DJI wireless Mic to the Tascam and what settings should I use in my R5C? Thanks!

trying to connect the battery holder for 2AA's to the tascam unit. I have removed the plastic cover. It's obvious the battery holder can only go one way. Does it really require a lot of force to attach the battery holder. I am worried that I am going to break the unit, or the contacts. Any comments or advice would be appreciated.

Thank you for this video, will be buying this for my R5c and thisbwill be my first XLR experience. I was wondering what the ATT and the limiter setting did but couldn't find nothing on them till this video. So thank you for that along with the other cool features like the headphone button on the back! BTW does this bake the 24 BIT audio at 96khz into the video tracks also? Or is there a setting for that

Sennheiser 416 doesn't fit very well in that hole. any tips to keep it in place? it sags

Hi helpful review thanks. Just curious I'm using this on R5C and it works fine, camera is seeing it, audio levels are being monitored. However, when I go into the R5C audio menu it's all grayed out there's no way to control mic inputs internally other than on the fourth page. Do you know if this is by design or if I should be doing something to turn It on. Any help is much appreciated and thanks again for your video, very helpful

Great stuff, did you slow down the audio to match the slomo video or was audio original speed ? Thanks 👍👍

External mics are important of course, but the problem with a lot of medium price mirrorless cameras is that they all record in AAC ONLY, there's no way to up the quality to .Wav files. Does anyone know a camera that uses .wav files?

Question: what happens on an R5C when I plug in 1 XLR mic through the Tascam, and plug in Rode wireless go through the camera’s 3.5 input? I use the Rode wireless go for a lavalier and I want an XLR input for a shotgun mic

if want to combine 1 XLR mic that's on the camera and a wireless mic that seems to be connected to 3. that doesnt seem to be a possible solution. only seeing 1 , 1+2, 3 only or is there a way to do that?

Excellent video. Does exist a similar tool for Canon R5? (Not the "C" model)

Hi I don’t see the Canon R6 as a compatible camera for this unit.. is it compatible?

Hi Sir! Doe this work with the canon R6 or only the new canon r6 ii mark ii? Does somethings change?

that wasn't much of an audio test. I'm curious to know how the limiter performs.

Will that work on my Canon C100ii?

What about for Sony?

Yeah, but how does it SOUND? Like typical Tascam?

does aodio monitor didplay goes away when you start recording?

Doe this work with the canon R5 as well?

Have you tried it with the EOS R10?

How do you connect Rode wireless go II?

Does this work with a top handle and cage

Anybody found a good case for this adapter?