Repairing a Rusty Frame on a GMT800 Truck [Cheap Duramax Part 2]

Рет қаралды 763,447

Күн бұрын

I repair the rusty frame of my 2005 GMC 2500HD with a Duramax diesel engine.
Fuel line disconnect tool: amzn.to/3GICv8i
Air chisel: amzn.to/3G5knVQ
Needle scaler: amzn.to/3DV8AYa
Instagram: / waldowelds
Videography
Canon EOS R6 camera: amzn.to/3ImsKfN
SmallRig camera cage: amzn.to/3tEaqL4
Sennheiser Wireless Mic System: amzn.to/33xT5ZB
Any purchases you make using the links provided help to support the channel at no extra cost to you! As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 1 000

@Foxtrot_Vet 2 жыл бұрын

I like how I spend my time watching other people do there projects while mine are sitting in the back yard unfinished

@WaldosWorld 2 жыл бұрын

Haha thanks for watching! 😬

@tyalbert5063 2 жыл бұрын

Makes you feel like you’re working too. Lol

@addisonlarsen4495 2 жыл бұрын

It seems to me I have either time or money but never both… if I am working a lot my pocket is full, but when I have spare time I’m poor lol

@moparproud3978 2 жыл бұрын

I hear you there, definitely guilty

@bossatroniansavage811 2 жыл бұрын

I felt this onna spiritual level

@TheDingmann 2 жыл бұрын

Finally. A KZfaqr smart enough to know oil undercoating is the only method worth a damn.

@WaldosWorld 2 жыл бұрын

That's right! 🤠

@WatchWesWork 2 жыл бұрын

You'll love having that needle scaler!

@WaldosWorld 2 жыл бұрын

I think so! And thanks for stopping by! 🤠

@andrewprina931 2 жыл бұрын

@@WaldosWorld sell that tailgate and get a transfer case brace! make sure the t case pump hasn’t already worn a hole in the case… they make an upgraded pump for pretty cheap. lot less then a new case.

@the_charter5134 2 жыл бұрын

I just watched your video with the oil leaking 3rd gen ram and y’all said it so similarly I was sure Waldo saw your video 😂😂

@mikus4242 2 жыл бұрын

Always a good sign for a newly discovered channel when WWW comments here.

@adancontrerasjr1355 2 жыл бұрын

You never disappointed waldo, you seriously have a gift when it comes to this kind of stuff. Keep up the good work man.

@WaldosWorld 2 жыл бұрын

Thank you so much!

@alexc.8424 2 жыл бұрын

I can't tell you how happy I was when you said some stick welding was in order!

@WaldosWorld 2 жыл бұрын

Haha a lot of people mentioned stick welding in the comments of the trailer build video, so I figured it was time 😂

@Grasshoppa97 2 жыл бұрын

Did you choose stick for temperature? To not overheat? Why not mig?

@alexc.8424 2 жыл бұрын

@@Grasshoppa97 Just fun and easy when you're welding thick steel. Plus potentially better penetration depending on the rod

@Grasshoppa97 2 жыл бұрын

@@alexc.8424 thanks!

@juanrodrigoramirez6428 2 жыл бұрын

You’ve done it again, a masterpiece of a video! Can’t wait to see 2nd part of the trailer build

@WaldosWorld 2 жыл бұрын

Thanks again! 🤠

@flyingace5057 2 жыл бұрын

@@marsya7089 What. The. Fuck.

@buildfabtest358 2 жыл бұрын

@@flyingace5057 yeah same

@zynifi 2 жыл бұрын

@@flyingace5057 Yeah these youtube bots are getting out of hand

@Mr.boxxchevy 2 жыл бұрын

@@zynifi hell yeah they are

@johngaston308 2 жыл бұрын

Hand fabricating instead of buying a frame kit.....that's a lost art. Thumbs up for sure.

@juanmore62 2 жыл бұрын

Shows what a man with time and patience, can do with a welder and a plan. Great job, again.

@mwilliamshs 2 жыл бұрын

Doctors have patients

@juanmore62 2 жыл бұрын

@@mwilliamshs Patience. Sorry I fixed the mess up

@WaldosWorld 2 жыл бұрын

Very true! Thank you!

@FishFind3000 2 жыл бұрын

20:05 that’s where the needle scaler comes in handy. It takes all the slag off quick and easy.

@willb3018 2 жыл бұрын

Watch Wes Work seems to be an avid needle scaler user. Seems tied to geographic location for some reason. 😂

@WaldosWorld 2 жыл бұрын

Good call! 👍

@Pete_Finch Жыл бұрын

This is seriously inspirational as a GMT800 owner. I've got a rusty old '05 Escalade EXT as my beater truck and it has done everything I needed it to and more even while being in very rough shape from the previous owner. 6 years of tough conditions (4 of them in Buffalo, NY winters) and I would love to give it this treatment someday - she's earned it

@bobbywhite961 2 жыл бұрын

The fact that I open this video and he has a motor on a stand ....out in the yard.... no tools or stuff around....uncovered.... my kind of guy already....100% thumbs up!!!

@WaldosWorld 2 жыл бұрын

Haha that's my brother's engine 😂

@huntercampbell765 Жыл бұрын

I bought a 06 and this video definitely made me feel a bit more confident about jumping into this project

@prevost8686 2 жыл бұрын

I keep one of those magnetic key boxes on my truck and beater car. They’ve saved the day more than once. Looking forward to your next installment in the D-Max saga.

@WaldosWorld 2 жыл бұрын

Thank you!

@dyllanhenderson5771 2 жыл бұрын

This is cool man. I work for Magna and I and weld build all of GMs light and heavy duty frames models. This is sweet to see how the models have drastically changed over the years but more over the failing points for rust build up. Super cool man thanks for sharing

@stevenkirby7478 Жыл бұрын

I marvel at the ability of folks who can do this type of project on their own. great job.

@zynifi 2 жыл бұрын

I'm very excited to see where this build is heading!

@WaldosWorld 2 жыл бұрын

Same! 🤠

@roundsm18 2 жыл бұрын

The attention to detail you have is a quality point in your videos that others leave out. I found you while looking for a flatbed design and then went nuts with all of your content because it parallels my career field. You are not only entertaining but you’ve crossed into a level of instruction that I wish some others would. Waldo is bringing back shop class one video at a time!

@WaldosWorld 2 жыл бұрын

Thank you, I appreciate the feedback! 🤠

@MEGAPL 2 жыл бұрын

I probably said it before but who cares LOL, those GMT800 crew cabs short beds in 2500HD version are one of the most "handsome" designs GM ever did. Especially 01-02 Chevys 2500HD and 03-07 GMCs. Can't wait for the next episode.

@WaldosWorld 2 жыл бұрын

Yeah, I do like the pre-facelift Chevys 👍

@BuildALotAcres 2 жыл бұрын

You did a great job replicating the cross member. Good stuff! Talented guy.

@jmac2o229 2 жыл бұрын

By far my favorite smaller channel I watch. Amazing camera work, and amazing work.

@WaldosWorld 2 жыл бұрын

Thank you so much! 🤠

@stevesalvage1089 2 жыл бұрын

Yep I'll go with the truck interest sure thing , that's a great job there ! Good to see Dinos Detroit 353 s still working away , great filming thanks Waldo !!

@WaldosWorld 2 жыл бұрын

Thanks again, Steve! 🤠

@ewanstewart8011 2 жыл бұрын

Waldo I think you’ve missed your calling, again you have produced an interesting and informative video that was just right in terms of length, well done 👍🏻

@WaldosWorld 2 жыл бұрын

Thank you! 👍

@mcbrian 8 ай бұрын

The finesse of pulling the bed off the frame with the tractor bucket was awe inspiring. Wish I thought of that when doing the fuel pump on my Sierra.

@adicted52427 Жыл бұрын

love how the truck looks sleek and modern while the backhoe looks like something a 1930s soviet would find crude

@lorenmeyer5290 2 жыл бұрын

As alway Waldo awesome job you are amazing fabricator! Loved watching and listening to you!! Can't wait till the flatbed build!

@WaldosWorld 2 жыл бұрын

Thank you so much! 🤠

@itsjustme9318 2 жыл бұрын

Your videos just keep getting better and better!!! GREAT JOB on that frame!!

@WaldosWorld 2 жыл бұрын

Thank you very much!

@kwaggs19 2 жыл бұрын

You have the best automotive videos on the internet - not to mention wonderful truck, fabricating & communication skills. I rarely comment, however this has given me new motivation to continue restoring my ‘96 stick shift 12 valve. Good job, Waldo.

@WaldosWorld 2 жыл бұрын

Thank you so much! I'm glad to be a source of motivation!

@billybowman8146 2 жыл бұрын

Put a bed back on the truck will look a lot better Really nice work

@oof578 2 жыл бұрын

I did this entire process to my 03 silverado just a few weeks ago. Replaced all the crossmembers in the rear and derusted the entire truck basically and painted it all up with por15. Just got done with bodywork a including fixing the rocker panel holes, then bedlined the whole truck black. Came out good, won't have to worry about rust for a long time. Also fluid filming it before salt season. Wish I had a lot of the tools you do here for this job haha

@WaldosWorld 2 жыл бұрын

Very nice!

@mm-nl3qz 2 жыл бұрын

How well did the por15 work? I gotta replace all the rear crossmembers and I want to get rid of as much rust as possible 😂

@oof578 2 жыл бұрын

@@mm-nl3qz it's worked pretty good but I would suggest 2 coats instead of the 1 coating did. Or 1 coat and something else, like bedliner. ALSO definitely pay the like 8-10$ for some crossmember frame caps. Coat the whole inside of them with oil. I used fluid film, get some sealant and apply to caps, push the caps in the holes. Crossmembers are sealed and protected, will never fucking rust on the inside atleast. I also got wheel well liners from rough country that work so good to prevent waters and everything just shooting up at the frame. I just bedlined my entire truck too

@oof578 2 жыл бұрын

@@mm-nl3qz for the por15 dont leave scaley rust or any chucks. Clean it good degrease it and paint

@mm-nl3qz 2 жыл бұрын

@@oof578 🤘🤣 i saw those come up (the rear wheel well liners) and got too stoked, definitely plan on getting the caps for the crossmembers... cuz my old ones... blew through em with my air needler🤦‍♂️

@pinwizz69 2 жыл бұрын

You did a pretty good job of repairing the corrosion on that rear frame. I'm just wondering why you didn't spray it down with Rustoliums rust encapsulater then primer before you painted it. Yes it would cost more but would go a long way to keeping the original and replacement metal for becoming a repeat of what you started with.

@garybeauregard5903 2 жыл бұрын

wow that frame brought back memories of making those chassis components at the factory i work at

@kevinritchie9227 2 жыл бұрын

At least its not like my 97 S-10. Spare tire was never used but decided it didnt like the truck anymore and just fell off one day...lol. Gotta love rust!

@WaldosWorld 2 жыл бұрын

Oof! 😂

@RefurbishedBacon 2 жыл бұрын

Heck yeah man love these types of truck builds - would love to get my hands on a diesel of any make really not bias towards brands and do something similar.

@WaldosWorld 2 жыл бұрын

Get a Duramax or a Cummins. A 7.3 Powerstroke would be good too 👍

@soowoo642 2 жыл бұрын

Beautiful work as always. Im surprised how well the frame rails held up, there is barely any pitting anywhere.

@Camo-Dan 4 ай бұрын

Me too

@Camo-Dan 4 ай бұрын

I was thinking the same thing*

@jeffmoore2649 10 ай бұрын

@ 18:35 ... "When is a Hammer ever NOT the correct answer"... Priceless ! Great Video- Really enjoyed !

@aiden.russell_1661 2 жыл бұрын

I’m so excited for this trucks future after binge watching you build Billy Bob!

@WaldosWorld 2 жыл бұрын

Thanks for watching!

@hamiltonsullivan6563 2 жыл бұрын

Great restoration... I will give you a tip for future metal work with piping though. Before you weld the brace or piping and seal it, its best to pour a acid wash through the inner piping to cleanse it and prevent the rust from getting worse in a year or two. Clean work though!

@cheezunriceramen8995 2 жыл бұрын

I randomly noticed the sub count go up ~200 yesterday while I watched a few Cummins swap episodes. I see this video within 20 minutes of you posting and notice the subs are up by 1k. Congrats buddy. Good content and quality video editing.

@WaldosWorld 2 жыл бұрын

Thank you! The channel has gotten about 16k new subs since I uploaded the gooseneck trailer build video 👍

@cheezunriceramen8995 2 жыл бұрын

@@WaldosWorld LOL that was actually the first of your videos I watched!

@dragoonTT 2 жыл бұрын

@@WaldosWorld That was the first video YT recommended me. I am glad I found you!

@johnl5658 2 жыл бұрын

Wow, I learned a lot on simple wielding and fixing rust parts. Looking forward to watch more of your videos, you explained each part that you do very well. thnx

@deamer44 Жыл бұрын

So satisfying watching the rust come off. Great series!

@mwilliamshs 2 жыл бұрын

Vehicle rust is basically a non-issue in my area but I would've primed the frame before painting and painted the new rear crossmember before installing and oiled the inside of the tube crossmember.

@WaldosWorld 2 жыл бұрын

In my experience, it's basically no use painting a frame around here. The salt will always find a way to get to the metal. The only way to stop it is to coat it with oil every year 🤷‍♂️

@bobpowers9862 2 жыл бұрын

Going by your last flat-bed build, I'm betting this one will be amazing. Aluminum is an interesting choice; less likely to corrode (but not entirely immune), lower weight, but not as stiff. Looking forward to your design choices.

@WaldosWorld 2 жыл бұрын

Thank you! It sure will be nice to not have to worry about corrosion for this one 👍

@bobpowers9862 2 жыл бұрын

@@WaldosWorld You'll still need some protection, just not as intense. Unless you use hard anodized aluminum parts, of course.

@JoshInTheWild Жыл бұрын

Recently stumbled across your channel and really enjoying your builds. I like the attention to detail. Just wanted to share a tip that’s worked well for me, with the amount of effort you’re putting into rust resto. I live in a state with lots of snow and heavily salted roads as well, I hate rust so I also use fluid film and started with that same rustoleum paint but still had to re-do a lot of the paint annually- I swapped to Por-15 paint with a annual coat of fluid film and haven’t had to re-do the paint in years now.

@billclisham8668 7 ай бұрын

That's one thing I don't miss about living in Michigan is all the dang rust. I moved to northern Idaho several years ago and can find find rust free trucks all day long. The only down side is they have been driven up and down mountains and they are mechanically worn out but I would rather deal with that than the rust.

@xKingdoms 2 жыл бұрын

I personally think it would look really really nice with a normal rust free bed

@kadenwatt2033 2 жыл бұрын

As do I, but to each their own

@kritikopedo 2 жыл бұрын

Hey dude I enjoyed the video; however, since you took everything apart and mostly down to bare metal, you could have brushed on some rust encapsulator, or sprayed on some raptor liner after a coat or two of self etch primer, or rusty metal primer (the brown one). Then later on you can still spray the undercarriage with wax, etc to protect from New England winters, but I doubt any rust will make it through that top layer of raptor. Truck undercarriage would look mint too!

@lmCIoudz 2 жыл бұрын

Fluid film is the best.

@WaldosWorld 2 жыл бұрын

Bed liners are super durable, but water and salt usually end up getting underneath it, and once it does, it causes the metal to rust even faster because it holds the water/salt there. In my experience, oil undercoating once a year is really the best way to keep water and salt away from the metal 👍

@mrmotofy 2 жыл бұрын

Fluid film the inside of the cab corners, rockers and doors wherever possible. They have a 360deg hose made for it. They rust from inside out

@jknicknickerson674 2 жыл бұрын

you make it look easy Waldo. Can't get over how good the back end looks now. Wowzers

@WaldosWorld 2 жыл бұрын

Thank you!

@aidanhobgood5133 2 жыл бұрын

I’m beyond impressed Waldo! Wow. This is excellent entertainment and education. You’re an inspiration! Thanks for everything you do.

@WaldosWorld 2 жыл бұрын

Thank you so much!

@xKingdoms 2 жыл бұрын

Big tip you should paint with por-15 for your frame. It works wonders on rust prevention

@matthewnasci2646 2 жыл бұрын

I'd like to know the source for the replacement rear crossmember. I'm doing a similar repair to an 01 Silverado 2500hd

@WaldosWorld 2 жыл бұрын

Here you go: www.autorust.com/product/chevrolet-and-gmc-2500hd-spare-tire-support-crossmember-art-211/

@koltondehler2391 2 жыл бұрын

Finally, a KZfaq channel I have found that isn’t filled with ads or trying to sell me something! You sir obviously enjoy working with your hands just as much as I do, best wishes and good luck.

@breakinggames6356 Жыл бұрын

Waldo you have inspired me to restore my dads old truck he passed away when I was young and I just got the truck from my grandfather a few days ago but it needs work… it needs control arms and a rear cross member along with new rear shocks

@qslider303 2 жыл бұрын

Man your videos are GREAT!! Fantastic quality and info!! Looking forward to ALL your builds! Thanks!!!👍

@WaldosWorld 2 жыл бұрын

Thank you so much! 👍

@christiangaldi2902 2 жыл бұрын

My new favorite KZfaq channel, I binge watched the entire Cummins swap series yesterday!

@WaldosWorld 2 жыл бұрын

Wow, thank you so much! 🤠

@dogpotter 2 жыл бұрын

When I first saw the frame rails I thought " he should use a needle scaler, then you hit it with the air chisel wow! great video thanks for shareing

@christianbentsen3637 2 жыл бұрын

Always excited when there is an new video from Waldo, and as always - really entertaining and educational! Keep up the great work and content :)

@WaldosWorld 2 жыл бұрын

Thank you so much!

@Thatloud1500 Жыл бұрын

Watching you make the new cross member really got my interest, I’m a welder and now you got me thinking about a new side job

@northerntranquility1614 2 жыл бұрын

Just came across your channel now a subscriber great job on that frame looks fantastic just in the midst of doing my jeep .Thanks for the inspiration Dale

@08Roadgl 2 жыл бұрын

You are a fearless fabricator. Have learned quite a lot from your videos!

@samquinn5409 2 жыл бұрын

Easily the most entertaining “man shit” KZfaqr I’ve ever seen. Thanks for allowing us all to feel like we’re doing man shit and living vicariously through you. Keep it up!

@user-id8vl3ek3g 3 ай бұрын

I made a new KZfaq account because my phone got broken and I lost all my accounts and now I get to rewatch every single Waldo video since I “haven’t seen this one yet” 😂

@Asomesauc 2 жыл бұрын

Really happy I found this channel early before it blows up.

@WaldosWorld 2 жыл бұрын

Same here!

@CasandraLuettgen Жыл бұрын

The youth is not afraid of the long years, but there is still glory on the other side.

@soniromanov Жыл бұрын

Best rust removing process video on YT, even though my car is totally unrelated to the GMC I still enjoyed watching it.

@tripodb.3706 2 жыл бұрын

Just found ya a little bit ago, right in the middle of watching the Cummings swap. Good stuff.

@WaldosWorld 2 жыл бұрын

Thanks for watching!

@Ezekiel-OffRoad 2 жыл бұрын

That’s awesome you tried the coal slag and liked it enough to include it in the video i hope this knowledge will help many ppl in the future seeing that in your video made my day thanks

@jameshax786 2 жыл бұрын

whenever you post a video, it's an instant 'must-watch'

@WaldosWorld 2 жыл бұрын

That's awesome, thank you! 🤠

@keithparady2594 2 жыл бұрын

Damn good job man ur videos are definitely stepping up and if a younger feller pays attention then he could watch ur videos and feel comfortable fixing his own stuff just doing it like a normal man would keep up the good work

@77zrod46 Жыл бұрын

Great video and info. If you make the time and like fabrication and welding you can save anything. Very satisfying. Can't wait to see more of what you can do!!!

@skibatrio 2 жыл бұрын

I literally did the same thing you did to my 2006 Duramax 8 months ago. I wish I had thought about the bottle jack when you put the spare tire receiver on. It was a fun project. Great work man!

@WaldosWorld 2 жыл бұрын

Thank you! 👍

@edwardkane3237 2 жыл бұрын

Nice work Waldo. I’m following this restoration/build to the end. I have a 2006 Silverado 1500 that I use every day in my lawn care business and absolutely love it. I found a complete snow plow and mount for a 1999-2007 2500/3500 Classic. I’m trying to find a solid southern truck. My biggest problem 4x4’s down south are far and few between. Keep up the great work my friend.

@edwardkane3237 2 жыл бұрын

My new favorite for rust prevention is Wool Wax, it’s much thicker than Fluid Film and it also comes in black. Wool Wax has my truck frame looking like new.

@JDog23332 3 ай бұрын

Last video with duramax “it’s so nice in here I’d almost expect a 2nd set a keys” this video instantly finds the 2nd key.

@FrankCastle694 7 ай бұрын

The courage of this man to attack rusty bolts without an ugga dugga

@GMCJay_lly 2 жыл бұрын

I love tbe gmt800 platform. I have the same truck 05 lly slt ccsb 4x4. I'm the 2nd owner. Rust free florida truck. Keep the diesel content coming.

@Tyler.254 Ай бұрын

I wish my life was as easy as an edited video

@octoparrot36 2 жыл бұрын

Just found your channel, Waldo. Fantastic content! I’m here in western mass and also have the same truck but mine is an SLE. Luckily the cab corners and rockers were done by the previous owner (professional level, not hacked!). I’m looking forward to tearing into the frame issues this spring. Cheers to great content!!

@WaldosWorld 2 жыл бұрын

Thank you!

@xozindustries7451 2 жыл бұрын

That frame looks a lot better than a couple we have done. I don’t drive mine in the winter to my crossmembers we’re still good, but the shock mounts were still gone., I couldn’t believe how thin my bed hitch was compared to the néw one

@farmertylerranch4399 2 жыл бұрын

Awesome job Waldo. Looks almost good as new, hope we get to see the flat bed build for this truck as well!

@WaldosWorld 2 жыл бұрын

I'll definitely be filming the flatbed build 👍

@mechanicmike2858 2 жыл бұрын

It is good to see somebody putting out a real feel video on how it is to work on old stuff I'm a relatively new subscriber and am on video 14 of the restoration of your 95 Chevy pickup

@WaldosWorld 2 жыл бұрын

Thanks for the sub and thanks for the feedback! 👍

@sandman5075 2 жыл бұрын

ah yes sparks next to the fuel tank. the most American thing I've seen all day XD

@WaldosWorld 2 жыл бұрын

Diesel fuel won't ignite from sparks

@marshallreynolds9604 2 жыл бұрын

Recently started following you love your engineering skills you've got an amazing set of hands around steel keep up the good work and the great content

@WaldosWorld 2 жыл бұрын

Thank you so much!

@drummerdavid9389 2 жыл бұрын

At my girlfriends chiro appointment watching this man get surface rust off a frame and dropping a gas tank like I’m about ready to do the few things on my car plus want a 4 door long bed 4x4 in that version but navy blue.

@WaldosWorld 2 жыл бұрын

Thanks for watching!

@Camo-Dan 4 ай бұрын

“Where’s Waldo” well i found him! He has one of the coolest videos ive seen in a long time. This was amazing. You are borderline genius for how well you fabricated that tubing/crossmember. I learned so much from this video and your editing was fantastic. The way you narrate is super professional. Not talking too much but just enough to explain what is happening. Instantly subscribed and cant wait to watch another video! I didnt know you could fabricate a crossmember or install a whole new aftermarket rear piece. That bracket was like brand new. Really impressive!

@richardjones5766 Жыл бұрын

liked your presentation of removing truck bed frame and repair. Nice going!

@sartoaj Жыл бұрын

Your freehand plasma cutting skills are top notch!

@jarelortega2210 2 жыл бұрын

Great channel! Came up on my feed went through your content and I love it! Keep up the great work!

@DNomer 11 ай бұрын

Very enjoyable to watch. Your stuff has a nice flavor and feel.

@keenancrowl6318 2 жыл бұрын

I’ve never been disappointed with your video work. You just keep getting better and better. Keep it up brother

@WaldosWorld 2 жыл бұрын

Thank you!

@scottyburch8662 2 жыл бұрын

Wow, you made that look easy and what an improvement, very much enjoying this channel.

@WaldosWorld 2 жыл бұрын

Thank you very much!

@richardtullius6419 2 жыл бұрын

Looking forward to seeing more of this project.

@alexclarkro9414 2 жыл бұрын

That's probably the best work I've seen on any of these KZfaq videos. You have the best way of doing so people understand.

@WaldosWorld 2 жыл бұрын

Thank you!

@mikewilliams2072 28 күн бұрын

The air chisel does a really good job!

@rickjames12324 2 жыл бұрын

Been watching your channel for a while now, its quickly becoming one of my favourites. Keep up the good content

@WaldosWorld 2 жыл бұрын

Thank you!

@bassdaze 10 ай бұрын

dudes got some mad sheet metal and fab skills

@w9akwqsl 9 ай бұрын

You are a good builder. Your welding is good also. Keep up your fabrication skills. You do good work.

@mikeznel6048 2 жыл бұрын

Great job on the crossmember! Thats how it's done!

@WaldosWorld 2 жыл бұрын

Thank you!

@grngs1 2 жыл бұрын

I admire you skill and determination!

@davidlegault9745 2 жыл бұрын

Hello Waldo, great start to what is going to be a very entertaining series. Thanks for sharing.

@njr7362 Жыл бұрын

I was complaining about a little surface rust and you fixed your whole truck I’m gonna do the same now

@chrissturt5381 2 жыл бұрын

Color me impressed on that bracket you cut freehand with the plasma torch. Seems like the editing is getting better and better each video. Well done!

@WaldosWorld 2 жыл бұрын

Thank you! 🤠