Snails are a part of the mollusc family and therefore do not fart. However, if you step on one fast and firmly enough, it can sound like an underdeveloped airbiscuit... the more you know.

That has to be the nicest work truck I’ve seen that isn’t brand new.

Grandma's Ranger, sister's Xterra, Charlie's Super Duty, and the engine from Dad's Tundra. I'm pretty sure Sarah's love language is "fixing old trucks."

Just want to say how great it is to see a fellow girl on this platform. not afraid to demonstrate her brains & subject knowledge. Also, I LOVE Japanese cars, my first car was a Celica that needed a LOT of work, and I've STILL got that car. Keep up the great work, I'm now a watcher of all things Sarah!!

There is *NO LIMIT* to what Sarah can do!

I’ve been a heavy duty mechanic and certified Cummins engine builder for 15 years. The part below the valve cover is the rocker box cover . Such a fun engine to build or inframe as they are so stupid simple. Looks great!

Quick tip. All sand blasters are the same. Expensive or cheap. It’s all the same concept. If it keeps clogging, plug the business end of the nozzle with your hand firmly before you hit the pedal. It’ll blowback the stuck pieces and unclog it. You’ll need to keep doing it over and over. It also gets harder as more paint chips mix in with the sand/blasting material. Hope this helps

Wow… that was a shit-ton of work accomplished. I actually really like these videos that bounce around to different tasks. Thank you as always, Sarah. 👍👍👍

Hello Sarah. I'm watching videos on the internet!

Objects definitely have souls, which is why I love this channel -- we get to see their personalities. Dos! The MR2 playlist is an amazing experience.

This girl gets more accomplished in a week than i can acomplish in a month!

Sarah, as someone who watches every one of your videos, I cannot understate the importance of this: Do not overwork yourself! We will wait for your content, don't worry!

Engine crane! Before tearing it apart, pump the jib all the way up in the air, and then keep going for 5-10 seconds more. Should stop it going down by itself 🙂 Usually some air gets in where it shouldn't after the cylinder has been horizontal for transport etc 🙂

Sarah, as much as i love seeing your next video i can tell you are burning yourself out and the candle at both ends. Take a couple weeks off for yourself, we will all be here waiting for you to come back. Much love ❤

@VixenSurfaceTreatments Come on guys, you need to help Sarah out with her vapour blasting issues. I think Sarah's levels of OCD trumps Sreten's over at M539 resto, would be awesome to see her use it.

I like that Charlie is still around.

Another meticulously wrenched and assembled project leaves the, world renowned, “Sarah -n- Tuned” shop. Glad Charlie came by to help… Although, you could have done it yourself, we know that for sure.👍 🇺🇸

Much awaited, much appreciated. I look forward to excellent work as always from you.

Well done, Sarah. It was nice seeing Charlie again.

The innuendos that you don’t take advantage of….we hear you Sarah; and it is hilarious hahahahahaha 😂.

A Sarah vid dropping just before my bedtime (in the UK) is a great way to end the week!

You are my favorite resto/build youtuber.

Former Ford parts manager and tech here. I could be wrong, but I believe the cabs for the ford pickups were the same from 2000 until the late 2010s I believe. Started my automotive career at the scrap yard and we would sell cabs all the time cause the interchange is huge on them. Thats why the front clip swaps are so common and easy on the fords, they would update front ends and interiors, move to new drivetrains and updated part designs but the cabs would be the same. So if youre having issues with the weather stripping or anything else you may be able to find one from a newer model single cab.

Sarah, the F350 looks absolutely amazing! The cab looks factory new! Glad you had help getting the engine and cab on the frame! Every video you do Sarah, is a Journey into the Very Interesting Zone! I look forward to every one! Thank you!! 👍🏻👍🏻

🔴🔴🔴🔴 When I see Sarah and Charlie together I immediately remember Frank and Karen from the Punisher movie ...

The truck looks absolutely brutal in this colour, with new front grill, and those chunky wheels, even without the front bumper. 👍 Also it was easy to spot the Alice in Chains reference, cause I actually sung along with their Man in the Box video after breakfast this morning. 🤘

Your attention to detail is 2nd to none Sarah!

We want more truck rebuild updates on this one? 🎉 🎉. Please give us a follow video on the completed project. 🎉🎉. This was a cool series for vintage truck builders. ThankYou!!

Should get Cummins badges to put where the power stroke ones go

Hahaha!! "Being a particular individual" is a classic quote! Fun fact, a friend of mine's online handle is Beef Supreme!

Best part of my Sundays!

Ok, I remember us driving your manual transmission Cummins around Santa Cruz city. I don't have to drive around anymore😎 thanks for the cool memories.

The truck looks like new. The project definitely has evolved and is another high quality and standard project that we are so used to seeing from you Sarah. You should be so proud of yourself.

Really fun to see you two work together. What a great project!

A tip for the sand / wet blast cabinet. Hook the air supply hose directly to the back of the gun. Made a huge difference with my cabinet. I use the Skat Blast brand handle/nozzle with the air hose hooked directly into the back of the gun with one of those inline water filters that are see through. Made a night and day difference.

Thanks!

Sarah has to be the hardest working car KZfaqr out there. :-)

I believe that you are the hardest-working person on KZfaq. Just saying.... Amazing work, as always!

As an Aussie who has owned a tray Ute in the past, I appreciate what you are trying to achieve. They’re very versatile vehicles.

Sarah! You should use butyl sound deadening in door panels when installing speakers, it will significantly cut back on vibration from the flat door panel, and can often times also quiet road noise following the same principle! This shit works a lot better than most of the deadening pads and moldings that are pre-installed on most cars. Some people also use these butyl deadening pads in replacement of a traditional vapor barrier as well, since it's sealed the exact same. Look into dynamat, or kilmat, or some equivalent company. Lots of car audio enthusiasts use this stuff for isolated sound systems, especially competition systems.

Those speaker baffles, we usually cut them in half or just use the top 1/3 of it just to keep water from getting on the top of the speaker. Also, the speaker sounds way better using the door as an enclosure as opposed to sealing that speaker in the foam baffle fully intact.

So much work going on in the tiny shop, hope that your plans for the future come to fruition. This truck is looking fire, 🔥🔥🔥excellent build Sarah 👏🏻👏🏻👏🏻👏🏻👏🏻

Good evening from the UK.

I always enjoy your video's, it's easy to see why everyone falls in love with you... you're smart, quirky, beautiful and fun loving.

Just like Ragu.. It's in Dehr ! (olden timey reference 🤤) Charlesleigh gohn be Sportin'❗🕺❤️‍🔥

" I got a Charlie here to help out" LOL, gotta love it.......

😄 Letterkenny reference, Mr. Dos, and a car review on the way! YAY! 🧡

should buy Stinger's roadkill speed rings baffle kit for the speakers they designed to be trimmed to fit ur vehicle inside door & outside door between door metal & door panel

Very NICE!! Can't wait till it Runs and Drives!!!

I'm thinking that those foam inserts for the speakers are possibly because those particular speakers may need to be in a sealed enclosure. This helps with frequency response and also helps to keep the stuff inside the door from vibrating at certain frequencies.

I'm loving the color of this truck. Great job as usual.

"Inanimate objects have souls. " I'm not the only one. Fantastic job rebuilding.this beast. Go Mr. 350!

“To be fair”😊 You are the best restorer on KZfaq 😊🇦🇺👍

Sarah, get your rest. We will be here.

I've played your 1991 MR2 play list. Its great. I've shared it at the hardware store where I work. Its popular. Thanks!

I'm a little jealous of the MR2... Buddy of mine in college had one and that was the single most terrifying car I've ever drove. Gonna own one some day

Yay! Once again you’ve worked your magic (and elbow grease) 🙂 just the greatest content from the hardest working content creator 🙂♥️

Thanks again for the copious amount of work you do. Love all of your projects.

Loving the Giulia in the background there - time to make it a permanent addition Sarah :)

The N14 Cummins that was in Semi trucks had the valve covers painted red. Probably the best engine Cummins ever made, I have driven enough of them.

Led Zep T-shirt for the win

I was ho-hum at first, but now I think that truck looks SWEET. That color is noyce. Can't wait to see finished result.

That molded foam enclosure you tossed actually served two purposes; one, weather proofing so moisture doesn't effect the transducer, preventing oxidation and shorting out. And, two, for sound purposes. A speaker on its own sounds like thin nothingness, that is why they are mounted in enclosures. It's where the tone comes from... js. I do enjoy your content.

Wow that paint stripper was so strong it burnt holes into your jeans 😁

This is fun to watch things come together. Thanks for your hard work!

The swap kit is from Diesel Conversion Specialists, they do a great job.

The bead blasting box is fine. If you’re having trouble with results, fix the nozzle and siphon first. Having extensively done both paint stripper and bead blasting as a hobbyist, I would avoid the methylene chloride paint stripper at all costs. It is awful stuff.

To Be Fair……. I'm binging Letterkenny also. And the wire brush works.

I miss that little MR2, what a neat little car, probably my favourite of all your projects.

When you have a Charlie around it doesn’t hurt. You drive yourself like cattle Sarah. I know what is. It’s called a work ethic. I get it. Please don’t neglect yourself. You deserve to be healthy. Only you can decide. I support your decisions. I remember the garage days. No one can accuse you of slacking. We care, your viewers. Press on Sarah!

6:40 those foam baffles you discarded make speakers sound FAR better than they do without them. I’ve used them on every system install I’ve done since 2001. Worth every cent if you can get them to work.

Hey I’ve found ditching the el cheapo nozzles that are as soft as cats vomit and getting a carbide type one, that won’t wear out so quickly helps a lot with consistency. Sizing the orifice in it to suit the compressor, will help a lot too 😊

PSA: A fine tooth half round tapered file works wonders on masking tape in addition to the hammer method. Don't knock it till you try it.

Another fun snail fact. A local school had a call out for people to catch and supply live snails for a fundraiser. In two nights I found 458 snails in my garden...

Last time I watched one of your videos was when you finished your grandma’s Ranger. I’m way behind. Glad to see you still have your Mister Too!

Hello Sarah your doing a great job and thanks you for all your wonderful time and videos.

This, the Celica, and your grandma's Ranger are my favorites! Awesome job! If only I could bring my Ranger to you...

Love those Cadmium Yellow bolts Sarah!

According to ChatGPT, Yes, snails do release gas as part of their digestive process, which can be considered a form of farting. However, it's not as noticeable or frequent as in some other animals.

Sarah needs a 'Sarah on Vacation' video

Just found your video. Like the Cummins swap. I often thought about doing it. I have 2005 F 350 and I have a 98 ram 3500 with a 24 valve in it. I’m going to go back and watch your past videos. The video was great , looking forward to seeing the truck get finished up

great projects Sarah, awesome editing. I like the random but organized flow of install steps. Seems more real as every project hops around based on the parts and availability of time.

Well done, Sarah.!

The F350 just keeps looking better and better.

This is off topic but Brent with Half Ass Customs has a new video removing rust and cleaning with a laser I thought you might like. Big fan. I have watched almost every video since the garage days.

No snails are not on the fart list. However: "According to a study, snails do not produce methane. However, water snails, mussels, and other mollusks can produce a gas called nitrous oxide, also known as "laughing gas", if they live in polluted water."

Mr-2, now thats my favorite car.

When using aircraft paint removal cover it with plastic for a few minutes it helps seal in the smell and help the chemicals eat in to the paint better.

Awesome videos of this “Super Uty” rebuild. I learned a lot just from watching the videos, and I really appreciate the time and effort you always put into the editing and development process. Your humor makes just about every difficult job a little more bearable. Awesome work!!

Like my mom said: No rest for the wicked!

Beautiful work girl WOW!! Great seeing Charlie 👌. I respect you so much very knowledgeable!! I love my Celiac hoodie! Washes up fantastic very warm in OH!

After a long day at work, to come home and be entertained watching your vid makes life a little more bearable. Tks Sand blaster: I assume you've checked the nozzle?

So basically ditching those foam inserts for speakers turned your doors into huge speakers, and now you will hear all the back of the doors with your music, which basically will sound like a bathroom. Always use speaker inserts/dampening behind speakers. Always. It's a part of the speaker.

I probably would've used something other than that fedora... pretty sure its purpose is not only dampening, but moisture protection. Maybe at least silicone-seal the connections and bare exposed electrical parts.

Sara, don't overdo it. You are keeping quite a work schedule. Take. some time to rest up.

Great to see Charlie again, I get us to all your friends that work with you.

Great video! I stumbled on your channel watching car review videos. Your style and sense of humor is very intriguing and has been very entertaining. Thanks for your service, I did 10 years USAF; been out since 2006. Keep up the great content!

Hello from France 🇫🇷. Bravo, bravo and bravo again. ❤

Yes. Keep thee 330 #'s ❤️ it!

Remember to sand the paint off the back of the block. The starter grounds through the adapter plate. Those DCS motor mounts are cool but silly expensive! I went with Destroked mounts and they worked really well. Super clean build!