Satin black everywhere (just a few updates)

Рет қаралды 18,404

3 жыл бұрын

So many GoPro audio issues with this video... Just a quick update on where the car is.
🔴 Stuff you saw in this video 🔴
1. McMaster Carr Flexible lug covers - bit.ly/3l9TwN9
2. Interior Trim Tools - amzn.to/2Guli7K
3. Sto-N-Sho 2015 - 2020 Challenger Hellcat - amzn.to/30oGIua
ZL1 Addons Stuff
2. ZL1 Addons 2015 - 2020 Diffuser - bit.ly/WPDzl1D
3. ZL1 Addons 2015 - 2020 Deluxe Diffuser (Big) - bit.ly/ZL1ddif
4. ZL1 Addons 2011 - 2014 Diffuser - bit.ly/34wSaFB
Luxe Auto Concepts Stuff (affiliate)
1. Tail light Fades - bit.ly/LuxeFade
2. Luxe 60x72 Satin Hood Wrap - bit.ly/3gl2SU7
3. Luxe 60x60 Satin Roof Wrap - bit.ly/3jT1sT7
4. Luxe 60x60 Satin Roof Wrap for the trunk and the front fenders - bit.ly/3jT1sT7
5. I called them and had them make me a 60x240" piece for the huge rear fender C pillar to A pillar. I cut the piece in half and used the window areas for the nose.
Tools can be found in my NEW Amazon Affiliate Storefront
bit.ly/WPDToolStore
▽ WorkPlayDrive Approved product Discount Page
www.workplaydrive.com/product-...
▽ My Video Recording Gear ▽
bit.ly/WPDRecordingGear
▽ Advanced Audio setup ▽
bit.ly/WPDRecordingGear
🔴 WorkPlayDrive APPROVED Products 🔴
Luxe Auto Concepts
I'm a Luxe affiliate your purchases save you money and help my channel
Get your tint kits here bit.ly/2lYCvux
5% Discount code WPD2022
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydrive.com
/ workplaydrive
/ workplaydrive392
/ workplaydrive
2008 Dodge Challenger 2009 Dodge Challenger 2010 Dodge Challenger 2011 Dodge Challenger 2012 Dodge Challenger 2013 Dodge Challenger 2014 Dodge Challenger 2015 Dodge Challenger 2016 Dodge Challenger 2017 Dodge Challenger 2018 Dodge Challenger 2019 Dodge Challenger Widebody Hellcat Demon Widebody Scat Pack Dodge Charger 2005 Dodge Mangum R/T AWD
~*~*~*~*~*~ Music Info ~*~*~*~*~*~
Background Track
KZfaq Audio Library Instant Crush - Corbyn Kites
End Screen
🎵 Beats By Shocka252 🎵 / livinproofsoldier
/ amongstkingz252

Пікірлер: 152

@rothsamphors7377 3 жыл бұрын

When I got mine I’ll transform it into yours now. The colours are haunting, adding more aggressive tone to the car. Well done!

@WorkPlayDrive 3 жыл бұрын

Thank you! ;)

$@lovethesmellofracefuelinth7374$

@lovethesmellofracefuelinth7374 3 жыл бұрын

The wrap on the roof reminds me of the old school vinyl tops, and really like that look a lot

@WorkPlayDrive 3 жыл бұрын

Thank you 🙏

@RTLife 3 жыл бұрын

Came out great. The color combo is on point man.

@WorkPlayDrive 3 жыл бұрын

Thank you man. Gotta get up to your area sometime soon.

@pitbikecrazy125 2 жыл бұрын

Seriously the sickest Challenger, I have ever seen. Nice job bud- impressive you tackled the wrap yourself too!

@WorkPlayDrive 2 жыл бұрын

Thank You 🙏 I try to learn a new skill every few months 👍

@jameswade6453 3 жыл бұрын

I put the same covers on my lug nuts over a year ago. They work Great!

@mrmand5539 3 жыл бұрын

You motivate me to do things myself on my car as well! Great job as always!

@WorkPlayDrive 3 жыл бұрын

Awesome! Thank you!

@fixandtests 2 жыл бұрын

great work on the wrapping !

@WorkPlayDrive 2 жыл бұрын

Thank you 🙏

@resdawgs Жыл бұрын

Very nice build. I like every thing about it.

@WorkPlayDrive Жыл бұрын

Thank you

@XmarcX92 3 жыл бұрын

Dude has my dream challenger. The paint, the widebody, the everything!!

@WorkPlayDrive 3 жыл бұрын

Thank you 🙏

@benzlick Жыл бұрын

That wrap looks really badass!

@WorkPlayDrive Жыл бұрын

Thank you 😊

@Riveraharry75 3 жыл бұрын

Great job Mike!!!

@WorkPlayDrive 3 жыл бұрын

Thank you

@moderndaycaveman2519 3 жыл бұрын

Regardless of what you think 💭 that wrap job looks perfect 👌🏼.

@WorkPlayDrive 3 жыл бұрын

Thank you 🙏

@The_Nameless_Entity 3 жыл бұрын

Love watching your video updates. Aloha from Hawaii brother.

@WorkPlayDrive 3 жыл бұрын

Aloha 👋 🌊

@larrymiller2815 2 жыл бұрын

Beautiful! I’m going to wrap my Scat pack Charger with a gloss black roof and hot rod red gloss red body!!!

@WorkPlayDrive 2 жыл бұрын

That’s going to look sick 😍 what’s your Instagram so I can follow?

@murder_wagon 3 жыл бұрын

Wrap looks great! Looks like a very clean Magnum in the driveway. Keep grinding 💯

@WorkPlayDrive 3 жыл бұрын

Thank you, I wanted a magnum since I saw the first commercial, so glad to finally have one in the driveway.

@milaperegon2787 3 жыл бұрын

Good job bruv

@desrt5608 3 жыл бұрын

Looks good!💯👍🏽

@furious7515 3 жыл бұрын

Car is looking great! Even better seeing a new video!

@WorkPlayDrive 3 жыл бұрын

Appreciate it! Had a lot of Mac issues slowing down my editing :(

@furious7515 3 жыл бұрын

Work Play Drive your videos are always worth the wait. You always motivate me to get out and do things to my Scat.

@mrhyd3mopar 3 жыл бұрын

Looks great !

@WorkPlayDrive 3 жыл бұрын

Thank you ☺️

@nchargeny 3 жыл бұрын

Mike, the beast looks fantastic

@WorkPlayDrive 3 жыл бұрын

Thanks Pete!!

@cyberghostn9637 3 жыл бұрын

such a nice color

@WorkPlayDrive 3 жыл бұрын

Thank you!

@zp2760 3 жыл бұрын

Good job 👏 looks fantastic

@WorkPlayDrive 3 жыл бұрын

Thank you 🙏

@milaperegon2787 3 жыл бұрын

Car looks bad ass

@Cylon93 2 жыл бұрын

I actually got the exact same wrap design only difference is I did the door handles and the side mirrors love the look

@darkside7802 Жыл бұрын

Nicest looking Chally I’ve ever seen. I’m going for the Satin black as my last big aesthetic change. Great stuff.

@WorkPlayDrive Жыл бұрын

Thank you 😊

@Siege196 2 жыл бұрын

Looks awesome great job . Reminds me of the f150 high top Color scheme . 👍👍

@WorkPlayDrive 2 жыл бұрын

Thank you 😊

@luv4life1 Жыл бұрын

This is one of the cleanest accent!

@WorkPlayDrive Жыл бұрын

Thank you 🙏

@georgiannebolinger9391 3 жыл бұрын

Bought the deluxe diffuser with black powdered coated plate, side splitters, front splitter extension, deluxe rock guards - all from ZL1 Addons - because of your videos. The WPD discount saved me enough to offset the shipping charges. Thank you. All of it looks great on my 2019 Challenger Scat Pack Shaker. If you endorse it, that is a good enough recommendation for me, especially with the thorough and easy to understand videos you post. I make my installer watch them before he works on the car, too. Having a hard time pulling the trigger on the Barton shifter just yet. I am of the era when everything was Hurst and still feel sentimental about it. I’ll get to the Barton eventually, I’m sure. My next project is a full wrap, new wheels and tires, and the air lifting/lowering setup in the trunk. Gorgeous wrap on your car! Thanks for sharing.

@WorkPlayDrive 3 жыл бұрын

Thank you 🙏 I’m installing my side skirts again this weekend took them off for the air install. I know how you feel hurst was the name that resonates with muscle cars. But with a modern car Barton kills it with a thicker and more modern look and design.

@LowLifeMods 3 жыл бұрын

Car is looking great! I'm a huge fan of satin black! 😍🖤

@WorkPlayDrive 3 жыл бұрын

Thank you

@2blackbikes 3 жыл бұрын

Great job car looks sweet

@WorkPlayDrive 3 жыл бұрын

Thank you I'm glad you like it

@TA_Plus_Hemi 3 жыл бұрын

Try a straight pin and some heat for that bubble. Go in pretty much parallel to the glass and it will not be seen.

@HemiBurns 3 жыл бұрын

Awesome....I have the Zl1 add ons side skits trimmed in yellow....

@WorkPlayDrive 3 жыл бұрын

👍 nice do you have an Instagram to show off your work?

@HemiBurns 3 жыл бұрын

@@WorkPlayDrive draghemi. Followed you.

@WorkPlayDrive 3 жыл бұрын

Got ya 👍

@The_Nameless_Entity 3 жыл бұрын

Beautiful bro. 🤙🤙😎

@WorkPlayDrive 3 жыл бұрын

Thank you 🙏

@lafaders 2 жыл бұрын

Hell of a job

@WorkPlayDrive 2 жыл бұрын

Thank you

@gregh9589 3 жыл бұрын

I hope you will post a video of the wrap Installation. I want to do exactly the same top style wrap you did. Love it. I have a white car, think it would great with the top black. Always enjoy your videos, thank you!

@WorkPlayDrive 3 жыл бұрын

I got a bunch of footage from my rap I just got to figure out how I want to put it up.

@1SikTA 3 жыл бұрын

That black plate on the ZL1 defusser makes sense to me! I was annoyed that it came with chrome hardware. I had to paint it all black so it blends in.

@WorkPlayDrive 3 жыл бұрын

We share the same level of OCD 😂

@garyrobinson2656 Жыл бұрын

Not crazy at all did a impressive dam good job bro salute 🫡

@WorkPlayDrive Жыл бұрын

Thank you 🫡

@timothybrickley4025 2 жыл бұрын

Very nice

@WorkPlayDrive 2 жыл бұрын

Thank you

@Taylormayd02 Жыл бұрын

🔥🔥🔥💪🏾

@chucknostaw2819 3 жыл бұрын

Looks marvelous. I love DYI. Did you video the wrap process? The hood vents. How did you get the film to lay down in the recesses? I did my hood. Around the vents did not come out well. I may try again if I can figure out how to get it right.

@WorkPlayDrive 3 жыл бұрын

I did record, but I'm not at the level to be instructing others on wrapping. Check out this video kzfaq.info/get/bejne/n8CKptN6p8WRhaM.html

@richardweyland116 3 жыл бұрын

Like the enthusiasm - the Challenger is a beautiful car and you're making it even better. Not a fan of lowering a car - too gimmicky.

@WorkPlayDrive 3 жыл бұрын

Thank you, it's not for everyone, but in my opinion the Challenger sits a little too high stock and the wheel gap got to me. For my location the roads are terrible and driveway entrances are aggressive so static low (Springs) are not going to work. Air suspension gives me the flexibility to drive 1" below stock, raise the car 1.5" above stock height for bad situations and of course my favorite, parking on the ground.

@pabloinsua7752 3 жыл бұрын

Do u have a video on how to remove roof molding sill

@WorkPlayDrive 3 жыл бұрын

I believe I have it recorded. It’s a simple task to remove It just peels off. The hard part is getting all the adhesive off.

@jon1380 3 жыл бұрын

Do the McMaster Carr Flexible lug covers work on the locking lug nut? Each wheel on my Challenger has one of those locking lug nuts

@WorkPlayDrive 3 жыл бұрын

All locking nuts have different dimensions so I'm not able to answer with any accuracy. McMaster shows the exact dimensions on the product page. Measure your Lock nut and if the Inner Diameter of the caps is too big/small McMaster has them in other sizes.

@tommer12698 3 жыл бұрын

I got a hellcat on order. Red interior , red calipers but wanting to do engine components in red then realized the orange on lower part of motor from factory and don’t think red will look good so I was curious to find out how what thought about red interior red calipers and then I do the compartment in an orange to match lower portion of engine. Kind of what you did except you don’t have red calipers. I don’t want to mix colors and make it look bad.

@WorkPlayDrive 3 жыл бұрын

So many color options wait till you get the car. Not much of the orange is visible.

@brewaire 3 жыл бұрын

Did you make any decisions on what products to use/clean and care for the vinyl wrap? I have my powder coated ZL1 diffuser on the way. I will also be adding the rear wing. Car looks great! Thanks for your time and effort on the videos.

@WorkPlayDrive 3 жыл бұрын

Thanks man, I'm currently using Meguiars Hybrid Ceramic wax and I'm totally impressed amzn.to/3ivdu3e. I can't commit to a cull ceramic coating because I like to change things up and Vinyl does not stick to ceramic. The Hybrid comes off with a good hard detergent vs polishing off the real ceramic. I tested it for 8 weeks on a vinyl patch that sits on the roof of the magnum out in the rain and sun all day long to make sure the coating would not damage the vinyl. No issues and with the car in the elements you can actually see that area is much cleaner than the rest of the car. After applying the coating the car stays cleaner for longer, water beads up really well and completely blows off with a leaf blower so the car doesn't even need a towel dry. bit.ly/3n5T6Jr Not bad for 1 application after 6 weeks and I only used 1/4 of a $20 bottle of product.

@brewaire 3 жыл бұрын

@@WorkPlayDrive I've been using the VIVID products. Renew + matte detailer - blue Eraser wrap cleaner - orange Seem to work well. I may try the Meguairs as well. Thanks for the reply.

@raulramon7805 3 жыл бұрын

What did you do with the Noweeds Diverters? Did you take them off the Scat Pack?

@WorkPlayDrive 3 жыл бұрын

I sold the NoWeeds, a few months back, the stock Hellcat exhaust is perfect for me. I think I'm calming down as I get older :/

@aceontheriver3968 3 жыл бұрын

did you wrap the performance spoiler? awesome look and stance.

@WorkPlayDrive 3 жыл бұрын

Thank you, no wrap on the spoiler, it's stock

@vthandi 3 жыл бұрын

Dope car brother. Looks good hope to meet you in person someday and thanks for the support on Instagram

@WorkPlayDrive 3 жыл бұрын

Any time! Maybe at then next SpringFest, I try to get out to California for that show every year.

@vthandi 3 жыл бұрын

@@WorkPlayDrive sounds great brother

@dallasmajewski173 3 жыл бұрын

It looks like you have a red leather interior, did you put that in after the car was manufactured?

@WorkPlayDrive 3 жыл бұрын

The Demonic Red leather seats came as an option

@michaelmartino6548 3 жыл бұрын

Could have wrapped the side view mirrors.....

@WorkPlayDrive 3 жыл бұрын

I didn’t like the look on my last car instagram.com/p/BqceWNiFSX3/?igshid=1spqdmlk9ub36

@resdawgs Жыл бұрын

How bout a wicker bill.

@lawrencetobin7050 Жыл бұрын

Please tell me wrap colors,so i can tell my shop the colors & wheels too

@WorkPlayDrive Жыл бұрын

The wrap was 3m 2080 satin black and the wheels were powder coated with Prismatic Powder satin black.

@fusedemotion333 3 жыл бұрын

Looks fantastic. Which specific color is the 3M?

@WorkPlayDrive 3 жыл бұрын

3m 2080 satin black

@WorkPlayDrive 3 жыл бұрын

And thank you 🙏

@DonaldJPump24 11 ай бұрын

Tint would really comlete that car

@WorkPlayDrive 11 ай бұрын

Agreed, but the tickets suck in my area

@DonaldJPump24 11 ай бұрын

@@WorkPlayDrive ah dang. I know its 28% legal for the sides in my state and most states.

@tommer12698 3 жыл бұрын

You have the red interior ?

@WorkPlayDrive 3 жыл бұрын

Yup one of my needs when I was shopping for this car.

@martinmathis8183 3 жыл бұрын

I am from north jersey and new to having a challenger it’s a 14 but in great condition but would love to get some pointers from you

@WorkPlayDrive 3 жыл бұрын

Stop by one of our Wednesday night meets you near East Rutherford?

@martinmathis8183 3 жыл бұрын

Yes I am actually. I live in Bayonne it’s about a 30 min drive

@WorkPlayDrive 3 жыл бұрын

Check out North Jersey Mopar Facebook group our meet info is posted there. I’m almost always at the Wednesday night meets.

@DarkHorseParatrooper 3 жыл бұрын

Dude how did you get the weather strips on the roof off?

@WorkPlayDrive 3 жыл бұрын

They’re glued on so they simply just peel off. If you would like to reuse them you just need to be very careful as you peel them off. Set the car out in the sun on a very hot sunny day and it makes it much easier to peel them off.

@DarkHorseParatrooper 3 жыл бұрын

@@WorkPlayDrive lol. I wrapped my roof in carbon a while back, I had no clue how to get them off. Next time I'll know. Thanks.

@fiouable 3 жыл бұрын

How much was it for powder coating all 4 wheels?

@WorkPlayDrive 3 жыл бұрын

The process was $150.00 per wheel. That price includes Removing the tire Chemical stripping Media blasting Powder coating Mounting the tires and balancing the wheel Custom multi layer colors cost a little extra

@fiouable 3 жыл бұрын

Work Play Drive better than I expected. Well worth it. They look amazing

@victoribanez8041 3 жыл бұрын

Where in jersey are you from im in jersey as well.

@WorkPlayDrive 3 жыл бұрын

North Jersey, our club meets weekly in East Rutherford (starting again in spring)

@XmarcX92 3 жыл бұрын

Damn not even going to let us hear the engine? Or a cold start :(

@alopez2006 3 жыл бұрын

How do you remove the door window weather strip?

@WorkPlayDrive 3 жыл бұрын

I don’t remove that trim they were easy to tuck under.

@richardtepas4832 3 жыл бұрын

and the roof trims ?

@WorkPlayDrive 3 жыл бұрын

The roof trim is just held on with double stick tape. I left the car out in the sun and a very hot day the roof was extremely hot to the touch. I gently lifted one of the edges and slowly peeled it back without bending the trim too far. Then I spent more than two hours getting the extremely strong double stick tape off the roof. What finally worked was letting it soak in bug and tar remover for about an hour and then using a soft plastic scraping tool to peel it all back.

@Supanig34 3 жыл бұрын

How much wrap would I need for this mod? I have a Go Mango Challenger and I need mine to look like this.

@WorkPlayDrive 3 жыл бұрын

1. Luxe 60x72 Satin Hood Wrap - bit.ly/3gl2SU7 2. Luxe 60x60 Satin Roof Wrap - bit.ly/3jT1sT7 3. Luxe 60x60 Satin Roof Wrap for the trunk and the front fenders - bit.ly/3jT1sT7 4. I called Luxe and had them make me a 60x240" piece for the huge rear fender C pillar to A pillar. I cut the piece in half and used the window areas for the nose. Hope that helps

@Supanig34 3 жыл бұрын

@@WorkPlayDrive Appreciate you my man. My wife’s Charger is taking all the attention. His mod will definitely be a game changer.

@Supanig34 3 жыл бұрын

@@WorkPlayDrive IG gomango_twins

@WorkPlayDrive 3 жыл бұрын

Do you have and Instagram I can follow to see how it turns out?

@Supanig34 3 жыл бұрын

@@WorkPlayDrive Spencer4highr610

@goldbug8958 3 жыл бұрын

I'm like #300

@WorkPlayDrive 3 жыл бұрын

🏆

@incoherentpanda4925 2 жыл бұрын

TINT YOUR WINDOWS, holy hell

@WorkPlayDrive 2 жыл бұрын

Would love to but it’s aggressively ticketed in my area.

@incoherentpanda4925 2 жыл бұрын

@@WorkPlayDrive maaaaan that aint stop nobody 😂

@navypackman Жыл бұрын

I wana know how you didn't burn your fingers on that bad mama jamma.

@WorkPlayDrive Жыл бұрын

I just had to wear welding gloves every time I took her out 😏

@navypackman Жыл бұрын

@@WorkPlayDrive Well, don't skimp, I've heard the cheaper brands exaggerate their ratings. Congrats on a freaking grand slam of a car.

@WorkPlayDrive Жыл бұрын

Thank you 🙏

@TeW33zy 3 жыл бұрын

You over did it its to much. Should of just hood, top and trunk or just hood and trunk. The added on the sidewall is way to much it just looks like a half ass paint job

@WorkPlayDrive 3 жыл бұрын

Thanks for sharing your thoughts 👍

@TeW33zy 3 жыл бұрын

@@WorkPlayDrive why not just wrap the whole car black that would look tight

@WorkPlayDrive 3 жыл бұрын

Because this is the look I wanted.