Satisfying Wood Glue Scraping Compilation

Рет қаралды 5,889

2 жыл бұрын

My Top 10 Glue Scraping Scenes with raw audio; so satisfying. I build a lot of boards and I scrape a lot of glue. It happens 1 hour after the glue up and is one of the most satisfying parts of the build process. In each of the 10 different scenes, I've included a picture of what the finished board looks like. There's some very satisfying footage in here, I promise. I hope you enjoy!
*Correction: I built these boards in Dec/2021, not Dec/2020
▶️ Want to support this channel?
SHOP BOARDS: www.westcoastboards.ca/shop-1
PAYPAL: bit.ly/3NOhbBO
CRYPTO: bit.ly/3u6Zx4s
▶️ Follow me
Instagram: / westcoastboards
TikTok: / westcoastboards
▶️ More of my videos
3D Patterned Coffee Table
y2u.be/npjxCYLcuFs
From Barrel to Butcher Block
y2u.be/uiu0Hkd6mb0
3D Patterned Cutting Board
y2u.be/Jrh_g79Rzh0
Credit for Optical Illusion and the ZigZag Wall patterns goes to the original artist: MTMwood @ / mtmwood
All others are my own design.
Titebond III Wood Glue: amzn.to/34BqDXf
Make sure to check out these videos:
3D patterned coffee table: y2u.be/npjxCYLcuFs
3D Zigzag cutting board: y2u.be/Jrh_g79Rzh0
Optical Illusion cutting board: y2u.be/S7qLC-lUwHI

Пікірлер: 16

@mariushegli 2 жыл бұрын

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@ryanhawkins 2 жыл бұрын

I appreciate you!

@hueyhewlett6930 2 жыл бұрын

You have a talent my friend and your work if beautiful. Unbelievable how oddly satisfying it is to watch someone scape glue!

@ryanhawkins 2 жыл бұрын

Thanks for watching!

@keithmalpass563 2 жыл бұрын

With only the slightest hint of using too much glue in the first place, just for the joy of doing this. Perfect!

@TheEdsousa 2 жыл бұрын

Your jobs are perfect. I Watch all your videos Congrats

@ryanhawkins 2 жыл бұрын

Thanks for watching!

@HoppersLab 2 жыл бұрын

Since you go through so much glue, have you thought of trying to recycle your waste glue, I was thinking putting it in a bucket and mix with 50% water, mix it up over a couple of hours, keeping top sealed with a lid, then drain off the liquid for the next glue up??

@ryanhawkins 2 жыл бұрын

interesting idea! I've never given much thought to trying that.

@DeMAMJourney 5 ай бұрын

hello sir from Indonesia, nice to meet you, I want to ask how long does it take to scrape off the glue? it looks like the glue hasn't dried yet

@catgynt9148 2 жыл бұрын

Thanks for sharing this insightful glimpse into your process. Appreciate the inserts showing the final project as well as this intermediate step. Is it possible to reconstitute the dried adhesive scraping for other projects or is it a complete loss. Wishing you and your family a blessed new year. Greetings from NE Ohio. Cheers

@ryanhawkins 2 жыл бұрын

Thanks for watching! I've never tried recycling the dried adhesive. Interesting idea though.

@catgynt9148 2 жыл бұрын

@@ryanhawkins perhaps running the dried glue scraps through a blender or spice mill to pulverize the strips back into powder. Back in the 1950’s our wood adhesive was a powder that came in a sealed can. Dad would measure a spoonful of powder with a bit of sawdust and a tiny amount of water to make a paste. Worked both as wood filler and adhesive. Stay safe out there. Peace

@davidm2645 2 жыл бұрын

I like watching your video - but I have a question...how can you remove the boards from the clamps after just an hour? I was always told the minimum was 2 hours. If I can I leave them to set up over night.

@ryanhawkins 2 жыл бұрын

I find the glue is set up enough after an hour that nothing is going to come apart and the excess glue is that perfect scraping consistency. I put clamps right back on after scraping and typically let the glue up sit for 12 hours before stripping them off again.