Everything You Need Is Here.. www.perfectpassrc.com/

Wow thanks bro. Love the video. Hands-down the best V2 Arrma limitless build video out here. Thanks again

As usual, another beautiful and tidy build. Love seeing your attention to detail, I got a real laugh when you saw Kevin’s build and wiring.

Thanks for the quick breakdown Raz. Not sure I can afford to do all the carbon fiber and aluminum just yet, but definitely took cues from this and all your other videos as I start my V2 Limitless adventure.

We all know that red cars go fastest so there is no other colour 😂

I love the way Raz works/builds the cars. Clean builds precise and very tidy

Having watched razs speed build series I've learned so much more than I thought very informative and easy to follow 😀 also had the opportunity to run with him at rossa. What a lovely genuine chap having time for everyone and sharing his wealth of knowledge with everyone. And watching hi. Smash 180mph +1st ever run at rossa was a massive highlight. Great video bro

raz you are going to break the record soon you are so smart about the set ups and super clean layouts 👌 wishing you good luck 👍

Man, that build is just beautiful. I wouldn't care if it only did 30mph as long as it looked this good. 😂

This is just a crazy amazing build. Really dig the videos!!

Quality video Raz loads of top tips for everyones speed demons 🤟👍

Was thinking of getting a limitless. I really enjoy the building part of this hobby so I may just have to follow the advice of the master!

yep jst got my limitless v2 and jst ordered the upgrades. u have inspired me to go nxt level . look 4ward to your nxt vid bro

I love the speed runs but I enjoyed that too I like learning about this. Can't wait for the next vid.

All honesty Raz thanks so much for your invaluable tricks and tips 👍🏼

Referred to your channel by a subscriber as shared I was getting a Limitless V2 and putting FPV on it. Great vid. Now need to look for your speed run vid!

Excellent video Raz. I love this project. Thank you very much. Congratulations for 139K. Greetings from Barcelona. Spain. Good luck 👍🍀

Another clean build. Can't wait to see it rip. Thanks for all you do and share

no secrets here!!!! awesome video man!! so much respect to willing to help everyone out!!🚗💨💨💨💨and some badass goodies you've got there! keep up the great work, and if red is your color...then red it is😁🚗💨👊

Love the colours on the end of the video 👍 nice touch 👌 Perfection as Always 😍👊

Sorry, I'm late buddy. My KZfaq notifications did not pop up. Luckily I just happened to come on your channel to watch your build series and noticed a new video. Always learning so much from your videos. I also learn once a car gets past 180 it's so hard to make gains.

Good reason to have notifications turned on, so we can see all your cars run in 1 vid!

Sooo beautiful!!!! Can’t wait to get myself a Limitless Roller

A Raz Shifrin Arrma Limitless. Perfection. Keep em coming Raz. Oh and red is a must. John

Good to see great builds always 👊🏽💯

Great build raz incredible thanks for the tips

Well done 👏 Love the production quality w the vid too

Awesome build vid. Thank's for Sharing Raz 👊💥👍💯✌

Great video!! Like usual very informative and entertaining!! 🙌🏼

Very cool, like the colour. Looking forward to the next vid!

Can’t wait for the crazy circus of speed run videos 🤣 Paint it red we don’t think you copy Kevin at all. I did find your channel because of him but you are a beast of your own. Can’t wait till you break the record!!!

Wow Raf.I had X ray vision towards the end.sweet build.✌️

I have that exact, same cigar lighter. Information in this video is excellent.

Please make another 100 mgh off road truck the first 1 was sweet man....your one of the best builders that takes your time Raz!!!!

Great build! Looks great

Come on Razz, you and Kev got the rc world on lock. You paint you cars whatever color you want to. I’ll bet Kev would agree!! Keep up the killer content!!

Way to represent the Limitless V2 brother!!!!!💪💪

Absolutely beautiful build 🤩

Great and very informative! I watch all your speed runs revealed videos. My car is running pretty good. THANKS! SO I got the v2 to build a beast of a car. I have the xlx2 and the 1721 2400kv. Running the stock spool, but can't seems to get the right pinion for it to run.Trying to understand this Kv thing. Can you give a tip on where to at least start? Thanks in advance!

Liked for algorithm. Great video Raz

Sublime vidéo Raz, why don't you shorten the wires on the ESC on your speed run cars to make it even more tidier? Would it have an effect on the power coming from the batteries to the ESC "to many amperes" You're going to get the record very soon ❤️ much love❤️

This is an amazing build raz but where can I get the aluminum diff holders and casings? Love your work keep it up.

it doesn't matter that it turned red! I like your videos, you talk calmly and then you don't shout all the time👍

Absolutely gorgeous build

Thanks for sharing!!!

Hope you've got time to answer a Question Raz. Would you fit it out with same 11kv motor and 8S setup for track use? I don't have a runway locally for straight line running.

Have you ever used/tried a servo saver assembly eliminator ? Great build and info as usual💯🔥🚀

Went back in time and watched this gem again😁🏎💨💨💨💨💨

I’ve been building mine today. Also in Red ❤

Super clean build, really nice car…

Love that shit 😮 amazing stuff 👌🏽😍 Keep it up 💪🏾 💥

Amazing 👏 video 🔥🔥🔥

Looks great buddy. 👍🇨🇦🤠

just great lol. funny ol youtube, my nicest builds are clear body JUST CANT HELP IT. i dont show to many people the clear builds cause raz shifrin does epic builds under clear bodys. and well youtube as you said ..

Did you know that the speed run secrets reviled series was around 40k sub . You have gained 100k since then . 🎉

Great vid raz. I had a question where do I get the futaba extended receiver attena wires. ?

Hey Raz, I noticed you didn’t install the motor sensor wire. Any particular reason you don’t want to run in sensored mode? What about monitoring motor temps? Thanks again for another informative video.

You just built my dream rc. I like the hot racing servo mount and there 25 Tooth servo horn paired with my Perfect Pass Monster servo. Have you ever tried Vitavon's products?

Raz I have followed you for awhile now and love your videos I have a question i am trying build my arrma limitless v2 like yours however the motor mounting plate that comes with the kit will not line up with the same motor and esc combo that you said to use what is the part number for the correct motor mounting plate

Super nice !💯👍

Great video as always Raz! As I am doing my build I am trying to figure out how you got a motor with 30mm hole spacing to work with a 25mm stock Arrma motor mount plate? 🤔🤔🤔🤔

I have learned a lot watching your speed builds. I would love to follow along. But I simply don’t have the funds to do so. I do have a vendetta, would be amazing if you could do a budget build with thme vendetta 🤞🏻😬

Awesome build. What shock oil do you recommend to use for a V2 speed car ? Keep up the killer builds dude.

Wow just beautiful 👍👍😂 got me sold … ARRMA should partner with you and sell these ready to run 🧐🧐🧐 just saying 😮😲😲 want one now 😁😁😁

Thanks for the video I follow your installation and bought all part’s needed But The 2028 1700kv motor not fit for my arrma v2 limitless is there any modifications for the motor mount ? I can not install the motor with the screws it is not the correct place

It would be greatly appreciated if you could provide a complete parts listing?

It needs a turbo booster, that's fast Raz awesome content man, how big of a weight difference is there between the stock plastic and all this upgrade parts.??

Hey raz you should make perfect pass carbon fiber parts kits for the limitless and the infraction and the felony with the bat wing included

So beautiful car!!!

I’d love to see a video where you take the power train from this car and put it in a bone stock chassis and slowly work up to see at what speed it fails without all the upgrades

Awesome 🔥👍🏻✌️

Hello Raz. It's beautiful video. I want to buy Limitless V2 also, but for another purpose. I really like how it is looks and try to change speed basher to race car. I know, that will not be fastest in technical parts of the track, but i want to try. Only 4S, light motor, 2x2S light packs, SP racing soft tires and we will see :-)

That was epic 🧐

are you going to make perfect pass shafts for the mojave exb?

Have you tried to heat the set screw with a pointy soldering iron tip the tip holding in the screw I found same result but no colouring distortion

You could go with a different finish or style of red. Camo... or mix some Matt and gloss into the design and have some glossy stripes over a matt body or something.

You might have covered in the speed run series you did, but do you true up your foams?

Epic!

Nice vid, Comment for the algorithm :)

<a href="#" class="seekto" data-time="230">3:50</a> I just hamer out the pin because I don't want heat transfererend onto the bearing and the plastic. when the axle can be removed I can apply heat.

Just put a limitless v2 in layaway and already got a 780kv spektrum and a max 5 for now. I'm just wondering what kind of gear for this motor to get the most from it.

Your the best raz

It would be nice if you explain why you change certain parts as well :)

When will the perfect pass launch control be back in stock?

Hi any recommend for pinon gear? Using 1721 2400kv. The rest of the upgraded parts same as this clip. Thank you

Hello Raz what 8s the right motor mount for the 2028 Castle engine? When came Part 2 of this Video?? What 8s the Gearing in this V2 ! SORRY for my English im come from Germany Stuttgart

Whats your gearing setup in your V2?? Cat Pack???

Do u know when u will have more of these servos available on Amazon

Great job, 👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌👌

I can I remove slop from the steering belcrank setup? I hate the slop in them what do you recommend?

Absolutely beautiful buddy....no not you .....the car the v2😂🤣😂jk CANT WAIT TO SEE IT RIP THE RUNWAY ALONG WITH THE OTHERS! As they say " cant run with the big dogs , stay on the porch"🤣😂👌👍👍

Wit your suspension how do it react to little bumps does it take it well or does it over react an over bounce an lose control

I just got my Limitless V2 today. Few questions: According to Earl Moorhead, the XLX2 doesn’t fit correctly under the stock body (rubs the body), also the 2028 motor doesn’t fit with the stick motor mount. I’m going to start ordering all the electronics for my build and just want to know if these statements are true.

Open wheel baby!! Good luck

How do you get that 2028 motor into the limitless. Mine came with a mount that accepts 25mm hole spacing and that 2028 has 30 mm hole spacing. Is there another mount available

How were you able to use the stock motor mount with the 2028? What's the trick?

🌕 Very informative and I find this build exciting though how many watchers are discouraged in even beginning this kind of endeavor ? It’s not for everybody, but that’s kinda cool anyway ...!

When is the Launch Control going to be available again, Amazon via your link says unavailable.

Hello again Raz, can i ask , do you come from an engineering background? . I've watched a lot of your videos now and your knowledge is phenomenal . Another very interesting video btw 👌.

How did the motor fit in using the std motor mount as I've ordered it and now confused thanks