Saving an Abandoned E92 BMW M3, Destroyed by the Previous Owner
Рет қаралды 97,469
2 ай бұрынOkay I got it running and (sort of) driving. Now it's time to make it ACTUALLY drivable! The previous owner left this thing rot and added some TERRIBLE modifications to it. Can I fix it all or should it be scrapped? Huge upgrades for the V8 M3 that sat around for YEARS!
My BMW and other merch: www.boostedapexdesigns.com
Instagram - / matt13ross
Early access to videos and other perks below:
Channel Perks: / @matt13ross
Patreon - / boostedapex
This site contains affiliate links for which I may be compensated
Brake Upgrades:
Brake Lines: rb.gy/13b9lr
Front Rotors: rb.gy/bd0cc3
Rear Rotors: rb.gy/00i9bu
Akebono Pads: rb.gy/842a1p
Wheel Studs: rb.gy/8iec91
Caliper Paint: amzn.to/3IUCznN
Thanks to ECS Tuning for helping out with parts!
Common tools I use: (affiliate links which I may be compensated)
Quick Jacks: amzn.to/36gkqBc ebay.us/2rUBfi
Milwaukee 3/8" High Speed Ratchet: amzn.to/3zo9NqC ebay.us/KR0raE
Milwaukee 3/8" Impact: amzn.to/3GaiYyT ebay.us/DhzBdX
Retractable Wall Pressure Washer: amzn.to/473zfl9
Pro Model Wall Pressure Washer: amzn.to/44TZIjc ebay.us/5kMpux
Red Spray Bottle: amzn.to/3DbqszB ebay.us/5xbQoa
Air Hose Reel: amzn.to/44A3kHm ebay.us/bMhFu0
Extension Cord Reel: amzn.to/3o4SyZ3
Jack stand wall mounts: amzn.to/3tWDOi7
Triple square sockets: amzn.to/47zBdsZ
Garage Upgrades:
Noco Genius Battery Tender: amzn.to/3zOCoFY ebay.us/lZJCxy
Battery Tender Wiring Harness: amzn.to/3UncTVL ebay.us/276IRz
Extension Cord Reel: amzn.to/3o4SyZ3
Air Hose Reel: amzn.to/448ZNQp ebay.us/bMhFu0
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Camera Gear:
DJI Osmo Pocket 3: amzn.to/4aUakSR
DJI Mini 3 Pro: amzn.to/3Qz39Yq
Canon 250D SL3: amzn.to/2L477Jm ebay.us/vdqXH0
Sigma 18-35MM lens: amzn.to/3cSM1uY ebay.us/pjLbAT
DJI Ronin Gimbal: amzn.to/3zwyJff ebay.us/ppnxfj
@ebsupra 2 ай бұрын
I genuinely don't understand how people let their cars get to this point. I'm sure it sat for awhile, but still. Anyways, always therapeutic to watch an M3 be revived. I don't know how far you plan to take this car but I'll continue to watch each episode. Also.. If you drained your master cylinder, you should use ISTA to bleed your ABS pump. It runs a program to cycle it. You know, BMW stuff.
@e92oreo68 2 ай бұрын
what is ISTA sir i need to do a masterr drain soon.
@ebsupra 2 ай бұрын
@@e92oreo68 BMW software for PC. Runs full diagnostics and a bunch of other useful things. Harder to get these days without paying but it's out there.
@ebsupra 2 ай бұрын
@@e92oreo68BMW software for PC. Does full diagnostics, service instructions, etc. There's free versions floating around but they're harder to find now.
@darklegion7780 2 ай бұрын
I understand why that's happen. (I'm from europe) So m3 cost 38k + € . I have 45k . I can afford it yayy! Then maintenance comes ,tires,oil and they go : ohhh 💩💩 that's expensive stuff . Let's save as much money we can on oil , maintenance exc .. + Flat out when the car is still cold and here you have the recepy for disaster Then they go on the internet crying how bmw is bad and so on.
@y2ksierra 2 ай бұрын
INPA also works on the E9x chassis.
@7477238 2 ай бұрын
I don't know how people let their car get that bad in the first place. Good work on reviving the M3.
@scottcolpitts8521 Ай бұрын
Some people have no buisness owning an M car. A lot of the time they stretch out their finances too far, and when it's time for maintenance they put it off. Just because you can make the car payment, does not mean you can afford it.
@erminc1891 19 күн бұрын
This car was just abandoned and not maintained, if you keep the maintenance intervals steady then you shoudn't have any issues
@Weidjeep 2 ай бұрын
Man that chalk grey is pretty darn sweet looking.
@matt13ross 2 ай бұрын
Thanks, I love it! Lots of people don't though haha.
@Jagman2919 2 ай бұрын
Dude , you have ice in your veins and nads that are solid brass taking on these builds. You never show fear when you run into problems. You always seem to keep a great attitude. Love the vids and look forward to more.
@X11CHASE 2 ай бұрын
Cringe
@mrlong6267 2 ай бұрын
Gotta give you mad props for doing everything in your own garage. I own an e46 m3 but I have a local mom and pop shop doing my work. Cheers to a healthy m3 buddy!
@canyonjohnson7966 2 ай бұрын
Just bought an 01 E46 M3 any tips aside from the big three
@sambardadin9709 2 ай бұрын
Hey Matt, those wires that you were asking about are for the tpms receiver, I had the same issue. The module is bolted onto the inner fender liner and that wire plugs into it, hope this helps. I also have a part # for the module
@Assimilator1 Ай бұрын
Agreed about the different size bleed nipples, it's bloody annoying! It's not just BMW who do that though, many other manufacturers do that too!
@Roger-fv9pw 2 ай бұрын
Bro, it is what it is. Someone beat the crap out of that BMW. looks like you got the thing out of a junk yard. Anyway now you have to fix what Someone else has ignored..! Happy fixing. BMW owner.
@ltakallen 2 ай бұрын
Matt, I am really enjoying this series and the journey…I must give you “mad” props on the editing!!! You kill it! Kudos 🙏🏾. You spend hours on the car and perhaps twice as long to make the content so incredibly entertaining 😊👍🏾. You have the right attitude about this project! You win WIN!
@matt13ross 2 ай бұрын
About 5x as long editing haha. Thank you!
@CannonCars Ай бұрын
I just recently bought a beat up e90 m3 and I’m doing the same stuff to it as you are pretty much, cool to see it documented somewhere
@TWOTONEFARM 2 ай бұрын
Keep up the great videos Matt!! Really crushing it with your choice of cars!
@Tootie27 2 ай бұрын
Amazing video and great editing. Keep up the good work, much love from Germany!❤️
@asherkimball8349 2 ай бұрын
Great work! Calm collected and proper!
@iRestoreGadgets 2 ай бұрын
Extremely underrated channel. I love your vids bro.
@longsleevethong1457 2 ай бұрын
I know. Did you see the way he filled up his gas can at the gas station? That fakkaaaan sweeeet!
@Blackzeusgarage 2 ай бұрын
I have to give it to you man your content is good and consistent enough to where I find myself interested in bmw and porsche as potential builds for me. Great job. I love your work!
@matt13ross 2 ай бұрын
Thanks for the feedback! I put the same effort into each video and try to edit them in a non boring way.
@qx4n9e1xp 2 ай бұрын
Man, i gotta get off my ass and install the braided steel brake lines on my 135. I've had them in a box on the shelf for 2 years now, and in that time, you've built a ton of rescue cars while all I did was injectors coils & fuel pump 😂 I appreciate this video, and it will certainly help me install my lines. 👌
@Mixalhsellada 2 ай бұрын
I have had my e93 m3 for 7 years now and it’s been completely trouble free. It has 130k miles now and little stuff is starting to fail. Valve cover gasket, some suspension stuff. Wish I had a friend like you in Houston that I could do work on it with 🥲 none of my friends are into cars. Nice work on the car. Calipers looking great
@FluePeak 2 ай бұрын
If you clean off all the gunk off the coilover threads and make em look nice, wrap some electrician tape over it and it will keep the threads looking good til next time.
@notcipriaan 2 ай бұрын
Nice man ! I really like your videos! Keep up the good work🍻
@F32Aidan 2 ай бұрын
You should look into getting the wheels refinished. Unfortunate they are CNC so you cant DIY it very well but it would be much more cost effective than picking up OEM wheels on marketplace
@carlosedu9224 2 ай бұрын
Hi Matt!! We love the 996,997 and the M3. Keep it up
@FrantisekSimandl 2 ай бұрын
Well instaled struts thats what i like to see :D Good job with the build.
@vistkri 2 ай бұрын
Just subbed. Great work! Looking forward to next video of this M3 rebuild series👏🏽✅
@matt13ross 2 ай бұрын
Thanks for the sub! Enjoy!
@ventsislavyordanov8745 2 ай бұрын
Just a heads up, Meyle autoparts are complete junk and a total waste of money. You want Mahle , they are way better quality and you won't be sorry down the road about it.
@Exillin 2 ай бұрын
Lucky he just bought the cabin filters, but yes Meyle is crap quality.
@thetoughcookie3665 Ай бұрын
@@Exillin I have had Meyle front bearing for 30tkm and recently just upgraded parts, it seem for like new atleast still. But yeah, I have heard the story. It's bit of where they buy the parts I guess. But some parts seem decent.
@yahirlamberty5582 2 ай бұрын
Keep it up man!!! Love to see some BMW content! Been here since the e36 build 💪🏼
@matt13ross 2 ай бұрын
Thanks, long time viewer too!
@jasonrathbone2937 2 ай бұрын
Matt ! Hello from South Africa ! Love your work mate, KEEP THAT SHIT COMING !
@Vgk36 2 ай бұрын
Hey guys with quick jacks. don't trip out if your air down seals go out. No need to spend money on new cylinders. they work just fine. My quick jack set is from 2015 I've had mine bought used for 3 years fluid past the air cylinder side and does not affect the way they work at all. Also when hooking up your lines. STOP fighting the quick disconnects. just press the down button WHI LE taking lines on or off. easy peasy.
@GuzTheBus 2 ай бұрын
honestly been wanting to start a new project since watching you & losing my project car to an accident. Keep up the videos super hyped to see where you take this m3
@matt13ross 2 ай бұрын
Glad you're enjoying it!!
@liccjr7387 2 ай бұрын
Hi Matt, I've really been enjoying your content after coming across you on my recommended. I'm loving the Porsche and E92! You got my Sub!
@matt13ross 2 ай бұрын
Glad you found me and thanks so much for the sub!
@eastonlive 2 ай бұрын
Direction on gas struts also helps stop the seals drying out too quick
@matt13ross 2 ай бұрын
Good to know, thanks!
@CrispyIips 2 ай бұрын
Be careful with the turner exhaust. Multiple people have reported rattling/quality control issues on the forums.
@salazar1104 2 ай бұрын
Cool video, you got yourself a new subscriber. One think, 11:35 , 11:57 you didn't cover with masking tape places(the shiny part around the hole for bolts) where mountin bracket meets the surface of the steering knuckle. Which puts you in danger of having the whole brakes becoming lose and failing while your drive. You can't put paint in between two surfaces that are connected with a bolt becouse the paint will brake of with time becouse of vibration etc and the nuts will become lose( it's something that many people had happened to them)
@matt13ross 2 ай бұрын
Thanks for the sub! I'll look into that paint area. Thanks for the tip.
@dailydriven991 2 ай бұрын
Those are some pretty great sponsors. The guys at Turner Motorsports are awesome. Their shop isn’t far from me and when I had my bimmer I took it there a few times. Such a great crew and they let my son climb in all their race cars and gave us a tour of the place. Very successful racing outfit.
@matt13ross 2 ай бұрын
I'm really pumped to have them helping out!!
@PompeyMatt17 2 ай бұрын
not sure about the bleeders but the brake unions are different sizes so you don't mix up left and right side brake pipes because of the ASC system. On Z3s, the unions are M10 on the left and M12 on the right
@dailydrivenclassics46 2 ай бұрын
For the rotor srews. I always, and I mean always give them the beans with the torch. Makes all the difference. Since i started that, i have never stripped one. great video tho ++
@matt13ross 2 ай бұрын
I didn't have my torch yet lol. But yes next time.
@mmautodealer 2 ай бұрын
Greate job! Keep working on it, amazing car, amazing work!!
@TheHunterHofman 2 ай бұрын
Interesting video, keep ‘em coming. Question though; did you thoroughly clean the threads of the wheelhubs before installing the studs? Did you furthermore put loctite on them and did you torque them to spec? I have a video on my channel how to properly install wheel studs if you’re interested. Anyway, look forward to the next one!
@landrymackie 2 ай бұрын
dream car. nice work bro ive been loving these vids
@DeadBoyRod 2 ай бұрын
When using a battery charger, hook it up from the front. Also, the car has comfort access. you don't need to put the key in to start it, unless comfort access doesn't work
@matt13ross 2 ай бұрын
I haven't tried that yet!
@pedrofly100 2 ай бұрын
Clean straight to the point job. Well donre
@Deathscroll41 2 ай бұрын
I'm here for this build.
@Bnm-fk9fi 2 ай бұрын
You were right Matt, I was yelling cover the damn car before you start 😂 looking forward for the entire build 😊
@jelmer4019 2 ай бұрын
Just discovered your channel, love the videos!
@EliAngwin 2 ай бұрын
In reference to the spacers being stuck: Aluminum on steel with salt and H20= galvanic corrosion.
@user-rn3qn3bp6i 2 ай бұрын
just earned a sub. I have a Jerez black e92 myself so im subbing to def learn new things I may or may not know from you. already learnt a lot by watching this build series
@matt13ross 2 ай бұрын
Thanks for subbing! We can both learn as we go lol.
@trebm3 2 ай бұрын
Great work per usual Matt!
@matt13ross 2 ай бұрын
Thanks!
@fahler14 2 ай бұрын
Sick how you can do this stuff. I love cars but I can’t fix much if it requires more than a multi tool. My brother is a mechanical engineer . Has done all sorts of crazy stuff with cars . He once bought 2 Subarus and made a Impreza rs . Took my broken e28 5 series and put a v8 in it. Meanwhile I barely can put together IKEA furniture . Awesome video it was my first one . I will tune in to see how this progresses! Good luck.
@BMWorks_NL 2 ай бұрын
Matt, did you mount the rotors correct L+R? they are directional (The brakes on the car and the ones going on are aftermarket all steel) original are 2 piece steel and aluminium and are semi floating. Next time undo the clip for the brakeline before undoing them, that prevents spinning and snapping
@matt13ross 2 ай бұрын
Yup! I followed their packaging.
@vargaalexandru4010 2 ай бұрын
Awesome, can’t wait to see this one finished
@matt13ross 2 ай бұрын
Thanks. I can't wait either!
@jigglerish 2 ай бұрын
I am still stunned at how little suspension droop it has
@marceamendola 2 ай бұрын
Excelent job 👏🏻👏🏻
@matt13ross 2 ай бұрын
Thanks so much!!
@mahdialsenussi3066 2 ай бұрын
Nice work 💛
@christophergreen6980 2 ай бұрын
The paint also looks dead. Almost like it had been resprayed before. Good job on getting this beautiful car back on the road.
@JP-zo4nr 2 ай бұрын
Damaged wires might be for outside temperature sensor
@crewcheeks2507 2 ай бұрын
Man I know I said I didn’t like the Terra Cotta interior but it has grown on me. I think the paint job did it for me. Nice Porsche !
@matt13ross 2 ай бұрын
I love it!!
@kimrunealund5575 2 ай бұрын
Good videos as always😊 bit worrid about all the overspray😅 but the car need some tlc anyhow😊
@Jupiterider1 2 ай бұрын
It’s amazing what have been accomplishing in such a small garage. Great work Matt. Keep them coming 😉👍🏼 Btw… The wheels on your trucks look dumb. The equivalent of clown shoes 😂
@matt13ross 2 ай бұрын
Thank you! AND NO TRUCK WHEEL COMMENTS ALLOWED!!!! lol
@fabianhaleem3295 2 ай бұрын
I know you can bring this baby back to life❤
@capalot5426 2 ай бұрын
The Tpms light might be on because the sensors don’t work they are on the valve stem ,use a tpms scanner to see which ones are out
@imranarain6912 2 ай бұрын
Do a couple drops of acetone on the plastic of that tripod and it will fuse it back together.
@matt13ross 2 ай бұрын
JB weld is drying now lol
@kxngking 2 ай бұрын
I suggest getting a carbon plenum to make some great induction noises from that s65, nicest one I’ve seen is made by eventuri.
@KB-cu1kj 2 ай бұрын
Enjoy the video. Good editing. It isa beautiful car.
@Tuscanvince 2 ай бұрын
Sounds awesome 👌
@ShoKata35 2 ай бұрын
on a bmw you should jump the car from the front, because of the battery managment system, dont ask me why i just read it quite a few times
@francisouellette5938 2 ай бұрын
This car is going to thank you for all this over-overdue maintenance. My god, I feel like thanking you myself. You know why some of these killer cars end up like this? It's because alot of them are bought by schmucks who dont care about the car itself, but only by the status it gives them. Happy you could save this one.
@jayd1008 Ай бұрын
htf do you not open the garage door when spray painting !?
@jeffhammond8969 2 ай бұрын
MAPP gas torches put out more heat, yellow canisters for basically same price. Should probably do wheel bearings in pairs. Good progress! Use flare wrenches on the brake lines.
@matt13ross 2 ай бұрын
I need some flare wrenches.
@wernerdanler2742 2 ай бұрын
You didn't say. Did your TPMS light go off? I told some guy on youtube not to put antisieze on the flange of the brake hub, just on the collar like you did, and he went kinda spaz on me. Just the least bit can throw the rotor slightly off. You do good work, Matt, but you should use a torque wrench on those wheel nuts. See ya! Oh, I almost forgot. I've seen those dust shields rusted out pretty bad. I'd clean and paint them.
@matt13ross Ай бұрын
No it didn't 😢 I torque..... Sometimes
@MarkCalica 2 ай бұрын
Matt, I’m curious why you raised the front suspension via the top spring area? Unlike European coilovers, most Asian coilovers are adjusted via the lower perch. Unless you did it at the bottom. You’re not supposed to adjust height from the top where the springs are at. That’s for pre-load adjustments
@matt13ross 2 ай бұрын
I did exactly that, I pushed the adjustment *screws* together to make them tight, then rotated the whole assembly. I didn't change the pre-load (maybe a fraction of a rotation).
@MarkCalica 2 ай бұрын
@@matt13ross ok, awesome. Love the channel. Keep up the projects
@matt13ross 2 ай бұрын
Thanks a bunch! These coilovers are temporary too, they are pretty corroded all around.
@Simb-l 2 ай бұрын
There’s also centre brakes hoses in the rear subframe
@matt13ross 2 ай бұрын
Yea I've gotta do those yet
@P-J-W-777 2 ай бұрын
BMW exhaust tone sounds good to me but I don’t know exactly how loud it was in person and ultimately it’s your ears that has to listen to it.
@longsleevethong1457 2 ай бұрын
This is some great gas station Gerry can filling content right here. Say what? You’re looking for some gas can filling KZfaq content?? We’ll look no further feller….we gotcha right here in this here gas can filling up channel. Ahhhhh hell yeah. That’s was awesome. I tell you, all day I was thinking about getting home and watching a video of some guy filling up a gas can and driving it back home and putting in his car guy car for his car guy video. For my money, car guy videos don’t get any better than this car guy video right here.
@MrHemikid426 2 ай бұрын
Great job, but most wheel bearings require a torque wrench set to the manufactures specifications for bolt tightness.
@matt13ross 2 ай бұрын
Technically everything is supposed to be torqued. But most techs don't.
@MrHemikid426 2 ай бұрын
@matt13ross hopefully you are at least loctite bolts. My mechanic was not going to install mine without correct torque specifications on the package. It's kind of important that your wheel doesn't fall off.
@bmc5108 2 ай бұрын
Great build. Do the wheel studs get Locktite, or just tighten to spec? I never had a car with screw in wheel studs.
@shippyboi 2 ай бұрын
they are just torque to spec. no thread locker necessary.
@adamrice2847 2 ай бұрын
Your voice would match" Kit Nightrider 2.0!"
@nickn6556 2 ай бұрын
Awesome channel
@matt13ross 2 ай бұрын
Thank you!
@atrain132 2 ай бұрын
4:50 I have thise Akenobo pads on my Audi. They are excellent for having zero brake dust! However, from my experience, they aren't really for performance cars. They do have a performance brake pad set, but it looks like they didn't give you those. Not sure. They don't have the initial bite I like, and they have made the brake pedal feel really soft.
@matt13ross 2 ай бұрын
I haven't tried these out before. Also not planning on racing this car, though.
@atrain132 2 ай бұрын
@@matt13ross they're good for normal use. ZERO brake dust 👌 Just hit me up if you don't end up keeping that car 😎
@KirkVSSpock 2 ай бұрын
Tires are from 2016 ! On one of them DOT production date is 42nd week of 2016 !
@craigwilliams6734 2 ай бұрын
Matt, you need a mallet…a club hammer is too brutal for getting even old stuff off the car!
@charha01 2 ай бұрын
Nice job and yes... why do auto makers do things like different size bolts that do the same thing???
@matt13ross 2 ай бұрын
Engineering is poor for sure!
@cheeseburgerbeefcake 2 ай бұрын
You can probably skip putting the brake disc/rotor screws in, especially if you have converted to studs - they are mostly there to stop the part falling off during assembly, save yourself a headache next time around. Looks so much better when its not slammed, not sure why someone put the cheap BC coilovers on an M3, it's an odd choice.
@matt13ross 2 ай бұрын
Def not necessary but I did it anyway lol.
@berreli 2 ай бұрын
Also... You should be sponsored by JB Weld. I bought it for the first time after watching you use it to fix all the various incidents LOL
@matt13ross 2 ай бұрын
It's super strong! Lol
@kingkhally 2 ай бұрын
For sale when done 👀
@Vyker 2 ай бұрын
Unsubscribed from LSC and subscribed here! Like the good old times. Thanks for the content
@matt13ross 2 ай бұрын
Unsubbed from legit???
@FreddyShoop 2 ай бұрын
Is there a new exhaust in the plans for the 997? I don’t know much about Porsche but I’ve never really heard one that sounded good.
@matt13ross 2 ай бұрын
Sure is! It's been hidden in plain sight lol
@krnlight 2 ай бұрын
I was going to ask did the tire sensor light go away?
@Simb-l 2 ай бұрын
The rear calliper will need new seals they are guaranteed to seize. Plus you should not use grease on bmw slide bins ticket to in even brake wear.
@matt13ross 2 ай бұрын
No grease???
@rj2196 2 ай бұрын
Will you ever do power mods on the dmax?
@matt13ross 2 ай бұрын
I've done an exhaust and tune so far.
@Ayeee_cam 2 ай бұрын
Nissans bleeder screws aren’t the same sizes on some cars too
@acidrain55 2 ай бұрын
I'd probably check the rod bearings before you go to far.
@auto__adventures 2 ай бұрын
The Porsche is looking great, so is the BMW👍
@matt13ross 2 ай бұрын
Thank you!
@g6et_wrx177 2 ай бұрын
You should swap wheel bearings in pairs!
@Yore0 2 ай бұрын
Hey Matt. I just noticed you’re at 66.6k subscribers. You might want to try to get that sub count up. 👹🤘
@NeoAndersonReloaded 2 ай бұрын
Illminatni
@matt13ross 2 ай бұрын
Trying every day!!! Hahaha
@marklengal9990 2 ай бұрын
Order some Kroil spray, it the best stuff out there. Use it on the coil overs and the bolts will come loose
@matt13ross 2 ай бұрын
I'll have to look that up.
@jovaneghtesadi1494 2 ай бұрын
Can’t believe the previous owner did the M3 like that… glad it’s being taken care of now.
@matt13ross 2 ай бұрын
Seems like a teenager owned it.
@tropg Ай бұрын
Suspension is not adjusted by the spring on BC racing (front end) this will result in wrong preload and cause harsh ride and bumpiness
@matt13ross Ай бұрын
I didn't adjust the spring. I spun the whole coilovers.
@tropg Ай бұрын
@@matt13ross okay, I saw you loosen the upper lock ring so I wasn’t sure
@matt13ross Ай бұрын
They were pretty seized and rusty so it wasn't straight forward lol.
@ohb7517 2 ай бұрын
Well BMW makes Rolce Royce and Volkswagen makes Porsche
@joepaquette7435 2 ай бұрын
Clapfest, but looking forward to watching you straighten things out.
@colin_g 2 ай бұрын
Those little rotor screws are always a nightmare. Once they come off my cars they always go in the bin
@matt13ross 2 ай бұрын
THE WORST!
@DaleSteel 2 ай бұрын
Problem is these E92 m3 drop down in price to silly cheap. So people stretched to buy one whilst cheap but had no money to look after them. Now they are quickly going up in value. I bought one myself exactly sane situation previous owner had abused it. What made it more incredibly stupid was it was the highest spec m3 I've ever seen. Only had 46k miles too. Its taken me 2 years to bring it back but its now like a brand new car and fortunately in 2 years its added about £8k in value since I bought it. Bought it for £7k spent about £13k fixing now worth about £25k and going up monthly
@matt13ross 2 ай бұрын
True words!
vodiff
Рет қаралды 419
Matt Ross
Рет қаралды 65 М.
WD Detailing
Рет қаралды 1 МЛН
Владимир Мельников
Рет қаралды 109 М.
Extender Alpha
Рет қаралды 3,2 МЛН
Хохланд
Рет қаралды 2,8 МЛН
printie
Рет қаралды 6 МЛН