These head's were bought originally for the stock 5.0l after getting 351w block for a stroker build ( I used what i had ) upgrading to new head's with: large valve and cc runner's is in the future. thanks for watching!!
spec's:::
pro comp/pro max 205cc heads 2.02/1.60 w/ 64cc chamber's..modified too. 2.06/1.60 w/ 62cc chamber's
int. valves: Milodon Mega Flow
exhaust . valves: trick flow
springs: comp cam duel springs for solid roller (orange stripe max lift .680)
retainers/keepers : Howard's cams (10 degree)
rocker's; Howard's cams 1.6
push rods: comp cam ( .134 wall)
rocker studs: A.R.P 7/16
push rod guide plates: Isky adj. (T.I.G Welded)
rocker griddle: (not shown) Howard's cams
porting work: bowl/throat/push rod pinch point
intake:
bowl: 1.901
throat:1.8490
pinch point: as much as i could with out braking thru...
exh:
bowl: 1.504
throat: 1.456
pinch point: same as intake...