cam specs : 255/267 @.50 .640 lift int and exh C/L 104 LSA : 108 I/C : 51.5 RPM range: 2900-6800 (1/2 mile oval track cam) springs: comp cam # 943-16 spring rate : 551 installed @ 1.950 seat psi : 212 open psi @ .640 565 went light on the psi due to, I plan on driving it on the street and try to save the valvetrain from being beat up.. just locked out the dizzy out today.. it wants more timing to clean up the idle mixture.. I got a retard box so ill use that to fire her up.. and see.. looking for a newer programable retard box.. not this classic msd one chip I got.. thanks for asking ! I don't have time to do real KZfaq videos.. I work to much.. need the money to build a race car... :)

They are Proform 750's except for the side hung Holley fuel bowl's

it's a long process .. not bad for 5 years in..

yea i guess you can say so.. but anybody running a solid roller would love to see that reading.. but the video was the engine break in.. running at : 18 degrees retarded.. and running at 1200 rpms.. i like running a higher idle due to a solid roller depends on oil splash.. I'd rather run a high rpm then the sound of the cam. that people like to hear.. but i started the tune.. you can watch the new videos it's down to about 8 inches.. now.. thanks for commenting and thanks for watching.

Thank's for the info.. believe it or not the doors open and raise very easy..( I can raise them with my index finger alone ) when I ordered them I had to tell vertical door company... my location so they sent me the proper shocks for my climate.. can't give a review yet on the longevity but the quality so far is outstanding... thanks for the sharing and watching..

No.. RSM tubular front sway bar brackets and support bar kit (Rock Solid Motorsports) rock-solid-motorsports.com/

Thank's Ford..Chevy..Mopar.. I't doesn't matter to me once you Modified them.. I't all about the build.. Thank's for watching...

Thanks

That depends on the closest track I can find.. I'm in WV. a track opened called almost heaven motorsports park. had a great opening day but the promoter pulled out and now it's shut down again. But the car is set up with 4.30:1 and going to run 28" tires that will set me up for 1/4 mile. running the trap at 6800 rpm. it's a convertible and tubing the car would have made me relocate all the hydraulics for the top. my plan is to have a street able ,lol Race-car/road course..car. Thank's for asking and checking out my channel.. feel free to ask more questions.. I work a lot to be able to build the car on my free time, that's why there's not a lot of info on my channel yet..

Yes sir...working on than now.. got the itch to hear it again myself..

your welcome... i used blue lock tight to help keep the studs in as well.. good luck and post to your page !!

@@quick-performance-services I will make a video, it takes me longer then normal to save up and do things, I got hurt at work and comp don't pay shit, and 8 surgerys later still no settlement Ben 4 yrs now, but I still take call outs on street racing, but cars to well known in my area

I could guess and throw out a number that's not fact... But a guess or sounds good.. I'd rather post a true number when I'm able.. but the free online calculators along with the bore n stroke and compression and cam spec. And intake valve size With 110 VE.... If my port work on heads are on point. It gave a number of 668 hp N/A @7000 at crank.. I personally think that high due to the heads so that's why I'm not throwing numbers out. I'm hoping for over 600 hp and I'll go from there.. the bore n stroke n rod ratio's will lose me some hp but gain in torque...hope that helps your questions Thanks for watching!!!

Don't you realize it's an engine run stand, and Not a engine dynometer ? And it's quite a nice set-up he has here. And the engine sounds pretty healthy also, very nice build.

thank you... motor is in car now so when I am able it will be a chassis dyno number.. but a true track E.T/MPH at the track will tell the truth.. thank's for watching.@@badass6.0powerstroke10

thanks!!

Yes it's the lower intake for a carb set up and they make a single and dual top for the hi-ram.. I have part numbers if you want them.. I'm at shop working on car. Give me a few hrs and when I get home I'll post them for you.. you can drill n tap the bosses for N.O.S fogger nozzles as well...

@@quick-performance-services please that would b awesome for part numbers, when u get a chance

the part number for the Holley hi-ram lower intake for a 9.5 deck (351) is #300-243 or black finish # 300-243BK the top plenum for a single carb seem's to not exist.. I'm sure 4 years ago when i started my build i seen one but i could be confused due to the fact i bought the Holley fabricated intake first and sent it back due to i didn't like the welding ect. If your determined to run a single carb on this intake you can use what i did to run my carb's in line. i used a blank top #300-208 or #300-208BK (black) and bought super sucker's 1 inch carb spacer's it only raises the carb 1/2 inch the other half inch is below the intake top that is the same thickness as the top it self. (flush). PNO. # HVH-SS4150-DPAL for the record: the Holley Hi-ram is recommended for a power range of 3000 to 9000+ RPM the idea of running a single carb mite be a issue due to the outer cylinders being lean and having fuel mixture issues with other cylinders robbing fuel at low or high RPM. if you made your own baffle under the intake top and cut down the space in the plenum itself it mite work better. I hear this is a very good intake for a single carb set up . Ibillmitchellproducts.com/product/bill-mitchell-products-bmp-063415-intake-manifold-ford-small-block-9-500-4150-carb-flange-click-here-more-info/ this is my next intake to uses on my build if the 2x's don't work out...hope this help...

Well I got my intake and blank top now ima cut hole for carb, so u have half the intake spacer under intake, I'm not quite understanding how u put half the spacer under intake and still bolted it down, I hope u still can awnser, I no its an old video but amazing

Also so a dyno with a single carb and made 20hp less with one carb, & if I lose a little ill make it up on looks!! Holley advertises this intake power band from 1500- 7000, I make peak power at 6800 so rpms is not an issue with afr220's

Thanks 👍

it's a off the shelf cam. closest to the max cfm lift the heads would flow before i ported them. I posted a video of the head work so far. you can watch it or just read the info. but the cam specs are: 255/[email protected] .640 lift w/ 104 I/C and a LSA@108 installed straight up.. RPM range is: 2800 to 6800+ ( 1/2 mile oval track cam.) thanks for asking... :) I work a lot and I'll post the engine specs. soon as i can..thanks..

750 DP with #80 primary's n #84 secondary's 4 corner idle adj. with 6.5 P.V in prime's and sec. just to fire motor up I'm sure it will change once it get's in car and under a load. using on line calculators motor want's 988 CFM take 30% off the duel carb's that should work out to be a 1050 CFM single carb. I custom made the intake top to run the Holley's inline on a Holley hi-ram intake. got a blank top from Holley. plan on running this on the street.. :) so i was going after old school street tunnel ram. I'll update more of the build when i get time or some one can just ask...thanks for asking

@@quick-performance-services nice job, what is the engine going in?

@@vrm86gt 94 vert. full Stifflers system along with team Z tubular front end along with the maximum motorsports rear torque arm n pan hard bar set up.. 8.8 rear narrowed 2.5 inches with strange S trac and 35 spline axles. Richmond 4:30's. Roll cage still in the works. u tube doesn't allow pic's so i don't have video to show my build. I'll add a video of my lambo door's to my channel. thanks again for asking.. p.s. nice 128 mph pass on your channel ..

@@quick-performance-services thanks! hopefully e can do better this year! heading to the track June 10th for next TNT!

hahaha....Thank you!

@@quick-performance-services 🤣🤣

❤😂😂😂

Thank you!