Scalextric Front Axle Tuning
Рет қаралды 15,556
6 жыл бұрынScalextric Front Axle Tuning
@Friskee62 2 жыл бұрын
I sand down the knurling and then add some ac glue to the end of the sanded axle. Let the glue dry so it flows to the end of the axle. The glue builds up what you just sanded off the axle and the plastic that came off of the wheel. Add your shims, then press in the axle...VIOLA, there ya have it. Roll the front wheels to round them out...works for me
@ashscott6068 3 жыл бұрын
Do the front axle and wheels even do anything? Surely the extra weight and rolling resistance of the axle and wheels, is more than the extra friction if the weight is all sitting on the braids? Or are there regulations that say the car has to have all 4 wheels sitting on the track?
@simoncorser8083 3 жыл бұрын
Hi, what paint did you use on your wooden track? Thanks :)
@sheldonnorton9035 5 жыл бұрын
What do you do if the front tires don’t touch the track. How do you lower it when it’s determined by the braids? Thanks for your time!
@Homeracingworld 5 жыл бұрын
Well sometimes it is just the braids. Try taking a pliers and flattening them. This does work. But sometimes without modifying the car, there is not much to do.
@sheldonnorton9035 5 жыл бұрын
Homeracingworld Thanks for the quick response! And I do replace the guide what do I replace it with? Thanks again
@dancarlos1216 5 жыл бұрын
Sheldon Norton this is probably way late but most racers use thin slot-it braid or similar. It really gets the guide way down the slot if the wheels allow.
Boone's Slot Car Garage
Рет қаралды 64 М.
𝐆𝐎𝐀𝐓_𝐀𝐄𝟕™
Рет қаралды 4,3 МЛН
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 160 М.
POPMMA FLASH
Рет қаралды 3,6 МЛН