LS Swap Fuel System

Рет қаралды 34,338

Күн бұрын

One of the easiest ways to make a fuel system with A/N fittings and utilizing the corvette style fuel filter / fuel pressure regulator.
email: fscantron13@gmail.com
Follow me on Facebook and Instagram for more updates
Instagram : Scantrons_Garage
Facebook: Turk Turkleton
Parts list:
P/N 5800 5/16 and 3/8 push to AN6 Fittings
P/N 5825 3/8 Sil. tube push to 3/8 inverted
P/N 5825 J 3/8 stainless tube push to AN6
Or Amazon links
www.amazon.com/Goodies-Speed-...
www.amazon.com/ESPEEDER-Nylon...
------------------------------
Enemy by SilentCrafter / silentcraftero...
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/enemy-silentcrafter
Music promoted by Audio Library • Video
------------------------------
#lsswap #anfittings #lsx

Пікірлер: 27

@i8nopunk 2 жыл бұрын

Great video right to the point no fluff thank you

@scantronsgarage 2 жыл бұрын

You are welcome. That is me. Direct and to the point.

@toneabet6252 3 жыл бұрын

Great vid. I'm upgrading my fuel system to support 500kw

@scantronsgarage 6 ай бұрын

Very Nice! One day I hope to get there

@showtime2203 2 жыл бұрын

Thanks

@hollywoodd3191 Жыл бұрын

Any issues with leaks on those press fittings on the fuel pressure regulator? Getting ready to use the same part. I see speedway offers one now with AN fittings already permanently attached.

@scantronsgarage Жыл бұрын

i dont know yet. I have not yet put pressure to the system. The car is going back together now for final assembly and I should be able to give you an answer soon. On the other hand, manufacturers use this style fitting from the factory and they usually do not fail.

@adonismoore7938 2 жыл бұрын

Hey does it matter where the regulator is located? I have the 255 walbro pump the vette regulator/filter is closer to the engine and isn’t mounted down, return line is factory line on my 86 Monte Carlo ss… my pressure is 70psi and I even changed the regulator out already pressure is still 70 psi trying to see why it’s not working on my setup

@scantronsgarage 2 жыл бұрын

That’s a good question. I wonder if the fuel filter you are using is bad or there is a clogged line maybe. I don’t know if placement matters

@adonismoore7938 2 жыл бұрын

@@scantronsgarage I replace the filter still same thing 70 psi

@samspeed2531 2 жыл бұрын

@@adonismoore7938 did you get your issue resolved? I’m having the same issues 85psi

@adonismoore7938 2 жыл бұрын

@@samspeed2531 I just swapped to a real regulator that I can adjust pressure myself

@samspeed2531 2 жыл бұрын

@@adonismoore7938 I just ordered a return style Aeromotive PR myself

@kevinroberts781 6 ай бұрын

My LS fuel rail has a feed line and a return line. What did you do with your return line?

@scantronsgarage 6 ай бұрын

The return line dumps back into the gas tank.

@scantronsgarage 6 ай бұрын

If you have a return on your fuel rail, you can cap it off and use the return off the fuel filter and rout that back to the tank.

@kevinroberts781 6 ай бұрын

@@scantronsgarage I gotcha. I see so many Corvette style pumps and I'm thinking I'll have 2 returns. But all I need is a standard pump putting out around 80 psi? The return will send unused fuel to the tank.

@scantronsgarage 6 ай бұрын

@@kevinroberts781 The corvette filter has a regulator for 60PSI built in. 60 PSI is required for our motors. And yes, the excess fuel will return to the tank . You can watch my first start video where I finally use this fuel system and check the fuel pressure if it helps. The good news is, this setup worked out well.

@shadymaint1 Жыл бұрын

Why does everyone want to ise AN fittings? They are pretty expensive and do not offer many benefits over other much cheaper solutions. Nylon fuel line is so much cheaper and easier to use.

@scantronsgarage Жыл бұрын

good question. I think we are all afraid to try something new

@MrWeisser22 Жыл бұрын

An hose will only last acouple years with fuel mine just started leaking only had them on for 3 years

@jasonhull5712 Жыл бұрын

Please don’t use those shit filter/regulator’s !! They suck first of all, but second they don’t actually regulate properly outside of a factory application. Third they cause premature pump failure as they are too restrictive. Fourth they leak often at lower pressures (when parked overnight). And last they are easy to pipe in wrong and can kill a brand new pump at start up.. oh and they are loud and noisy too. But dig the bud, everything else is right as rain. 😊

@scantronsgarage Жыл бұрын

This is good information thank you. I think this is more of a get things up and running system. I just pulled the engine to paint the engine bay. While its out, gonna do a cam and valve spring upgrade. Thanks again.

@howiepol1655 3 ай бұрын

for a basic 4.8 LS 2006 engine going into a c10, whats a better filter/regulator? what should i get, to replace this corvette style regulator? (returnless)

@jasonhull5712 3 ай бұрын

@@howiepol1655 I would recommend a standard EFI regulator. Aeroquip makes some of the best ones out. However they are pricey. But even the knock off versions are far better than the “corvette regulators. I just punched in fuel pressure regulator on eBay and found them for like 45- up to 130 bucks.

@howiepol1655 3 ай бұрын

@@jasonhull5712 this is all new to me. super appreciate getting a reply