I use 4.8 mm fuel tank breather hose it fits over the valve perfectly 👍

You removed the valve stem you can fill that all day long but you can’t keep the air in it with the valve stem out!

I didnt know people didnt know this

Good luck putting the valve core back on lmao

Do you have to take out the whole tire?

Doesn’t the air come back out without a valve in it?

Love this totally functional hack!

So the air comes out when you take the hose off. So is this just for seating tubeless tire maybe you say that or it can be part of your video title.

just buy an adapter and leave it on the valve, thats what i do

* hank walks in*

Thats how you do car tiers too. Just remove the core.

I’m gonna be honest, lived in a mechanics home my whole life, I didn’t know there was a different way to do this other than a shearer valve

It's sad you just figured that out 😂

that is if ur innertube has removable valve core, mine's not

Same difference, but I often remove the core like you did and use the blow gun on the compressor since that's usually what I have attached to the hose anyway.

Go to the gas station and use those....

I got one too. Drill your presta valve rims so a schrader will fit.

How you know the pressure inside your tire ?

..... assuming you have ¹a regulator on your compressor that gets down to bike tyre pressures, ²high pressure tyres, or ³a deaf wish, that's a great idea. For everyone else, there's sanity

What's the point ? Got to reinstall valve and then pump it up again

lol, you can almost hear hundreds of bicycle tires blowing up in the faces of clueless goobers....

Bro! Thank you! I'm so bored once snowboard season ends. I just bought my first MTB. Assembled it, went to air it up and welll. You can imagine my surprise when I went to use my air compressor 😅 ran to local bike shop for a floor pump. Anyway. My wheels come tubeless ready. So that will be my first upgrade. My worry was seating the tire with a floor pump without a charge chamber. I discovered we have adapters so I can use my compressor. But now no need to even spend the $7 on adapters.

I’m looking into installing a schrader valves on my wheels. The mountain bike industry should go to them. They are better for us.

Then why not go back to the good old schrader valve? 😅

Only good for seating the tire on the rim. Correct?

i use the hose of the pump directly in the valve core

Bro that thing is all over gas station air pressure..

how do u keep the air in without the valve core tho....

Doesn't the air just come back out or are you only talking about seating the tire?

The real hack is to toss your fussy presta valves and install tubeless schrader stems..yes they exist for MTB.

I mean, on quality tubeless setups you don’t need a air compressor I use a floor pump all the time and it’s fine. Just need quality parts.

I have always heard it is problematic to fill bike tires to fast.

How to hit the pin ?

So, you've taken the valve out, & inflated the tyre. Then the air leaks out. What's the point without a valve?

Be careful with this the air will not stop and the tire will pop make sure to pay attention

That’s how I’ve always filled up my bike tires 😂😂 I have a compressor for pneumatic tools, will never use pump tool besides for emergencies lol.

I think we can all agree that Schrader inflator sounds better to

So he changed the tube from presta to schrader? what is this magic video?

How tf is this a hack this is common sense

Needed this🙏🙏

This person bears an uncanny resemblance to Edward Norton 😂

U still have a presta on ur wheel, so no matter what you plug into the hose as long it's equal or greater than presta. If presta inflater is equal to presta valve then this auto inflater doesn't change anything

Yeap bout time mtb went back to schrader

Doesn't make my floor pump inflate any faster though...

Could you slow down or make a video on how you made it tubless? Only thing i could notice was you removed the valve core and filled in air

Actually those shrader valves are only worth about 15$ they mark it up like 600% and sell it to you because u dont have a tire machine

Thats how i make my tire tubless with floor pump

Then you just hold the air in with your finger until you rethread the valve core back inside? How does that work?

Anything can infant a valve when you remove the top of the valve. But that's something you didn't show or say

Ehhhh. It’s just a pain in the ass to maintain pressure long enough to get the valve core back in. Good tip for seating the bead tho.

You’re going to be riding on two land mines trust me.

Nice physics hack😂😂😂

the philippines is living in the future😂

just buy a prestaflator. theyre like 10 bucks iirc and they work awesome

I do the same thing for car tires

You will never find it anywhere for "a couple bucks".

I have a secret for you.... RideAir ConvertAir.... and never have to deal Presta again.

The air doesn't stay In

I was so confused how you would fill a tire with no valve stem. Then I realized you're seating the bead.

Yeah now do that with a hand pump and you don't have a free hand to hold There's a reason they use presta

People are more clueless than I thought

This is common in India

1 million speed bike

inflating a wheel that fast gives stress to certain spokes for a quick second but it dont matter so yeah this comment is pointless and thats good for your tire..yeah? Yeah.

Ok ? That like me going this is a chefs knife I can cut with it, this is a Ford mustang it’s a car I can drive it

Watch a dude break his arm with one. He couldn’t get it off in time and the tire exploded

#Schrader inflater

I was unaware that people didn’t know this…

Bruh?

I use propane

Ryobl

I hate Prestas

First

It popped pin me please

It takes 30 seconds to inflate a bicycle tire with a presta valve.. you're gonna spend more time switching everything and removing then replacing the core then you would just inflating the tire without all that hassle

Why would anyone ever need to do this.

This is nothing new

You don't need a fill valve at all. The coupling will fit right over the valve stem and all you have to do is push it on. Now that's something you didn't know!!!