Schwintek Slide Room Track Replacement -- Best Practices & Tips -- My RV Works

No video

Schwintek Slide Room Track Replacement -- Best Practices & Tips -- My RV Works

Рет қаралды 10,727

Күн бұрын

My RV Works, Inc., RV Technician, Darren Koepp, is out on a service call to replace the tracks on a Lippert Schwintek Slide. Follow along as Darren shows you the issue the customer was having with the slide room system and explains what is wrong with the tracks and the gears of the slide room. He also takes you through the replacement process and gives you tips, tricks, and his best practices to ensure a successful installation of the new Schwintek slide room tracks.
Come support us on Patreon for extra benefits and more RV Tech content.
Join us at: / myrvworks
Don’t forget to like 👍, subscribe, and hit the notification bell 🔔 so you don’t miss a video!
=============================================
Topic: Slide Room Track Replacement
System: Lippert - Schwintek Slide Room System
============================================================
Related Videos: "Schwintek Slide Room Only Moves 2 Inches And One Motor Stops -- My RV Works"
• Schwintek Slide Room O...
=============================================
Products
Men's Tactical Shirt: amzn.to/3RKE4H4
Men's Tactical Pants: amzn.to/3RJ9Rbl
Online Tools & Parts Store: myrvworks.com/...
Amazon Storefront: www.amazon.com...
=============================================
Resources
Main Site: myrvworks.com/
Manuals: myrvworks.com/...
Service: myrvworks.com/...
Blog: myrvworks.com/...
Patreon: / myrvworks
=============================================
Film Date: 11/16/23
Location: Salt Creek Campground, WA
Camera:
Samsung ZFold3
Samsung Note8
Olympus TG-4
Audio:
Microphone: amzn.to/3ydube6
Portable Recorder: amzn.to/3M4Nig1
Lighting & Accessories:
Lighting: amzn.to/3URgn2u
Tripod: amzn.to/3BZfEUm
Tripod Mount Adapter: amzn.to/3UXPVV1
Music:
"My RV Works-Jam" Composed by Steve Patry - Four Faces Band
As an Amazon Associate I earn a small commission on qualifying purchases, at no extra cost to you.

Пікірлер: 38

@aaronharris5541 7 ай бұрын

Thank you, thank you, thank you for all the time you take to make and post your videos. You have given this RV DIY guy the confidence to take on item you showed me how to do, and saved me thousands along the way. Doing the job myself has given me the knowledge that I pass on to others RVers when they have the same problems.

@MyRVWorks 7 ай бұрын

Our pleasure!

@connietomgiordano7756 7 ай бұрын

Excellent video. Nobody better. Thank you.

@rcastorena 7 ай бұрын

Excellent stuff! Thank you for these videos. You've helped diminish any anxiety that I had about these systems. Camp on!

@WILDEBILL308 7 ай бұрын

Excellent video. I now know more about that system. I had never seen how it worked or went together. Yes not lubing is stupid.

@GolfMissouri 6 ай бұрын

Your commitment to a quality job well done is commendable regardless how terrible the Lippert design.. love your teaching video’s

@robertherndon8543 7 ай бұрын

Darin have you ever installed a Vroom slide system? They are out of Arizona and replace Schwintek slide systems

@MyRVWorks 7 ай бұрын

I'm aware of the Vroom system, but I have not installed one nor worked on any.

@tommarabel 7 ай бұрын

Hi Darren, I just had my torque shaft drop from my 2018 Lippert system, guess however they crimped it didn't hold it up, rendering that side of the slide room non-functional. Lippert's only option is to sell me an entire new system for $1200 plus shipping, your video is spot on! I understand your philosophy of best to have all new parts to make it right from the get go, but as a DIY'er , going to try to finagle a solution to keep the shaft in place before shelling out the dough. I wouldn't have the confidence to undertake any of it without your videos! Thank you and your team at My RV Works!

@user-fz1je6sj6k 7 ай бұрын

Great video Darren! Thanks for the detailed explanations along the way. I am a believer in the CRC teflon spray also!

@48VAC 7 ай бұрын

Great video. Learned something even though my trailer has cable slides.

@joewilly5332 7 ай бұрын

What you've learned is you're glad you don't have a scwintek system.

@mikeobenland4395 7 ай бұрын

Great learning experience for me with a great view!

@MyRVWorks 7 ай бұрын

Glad you enjoyed it!

@andrewspies1968 7 ай бұрын

Love your videos! I bet Lippert keeps changing designs because the previous keep failing. Schwintek is a horrible design and I wish they’d stop making it altogether.

@laundrymanadams6105 7 ай бұрын

Great video my friend,

@MyRVWorks 7 ай бұрын

Thank you 👍

@TraconWizard 7 ай бұрын

Good stuff. I'm looking for the picnic table in your affiliate link.

@humbertodiaz9753 2 ай бұрын

Your videos are amazing. Well, I have a good one for you. My driveshaft came down off the motor/gears. I was able to push it back and it was working for a while until it came off again. I can see that you are showing a "c" clip. Is this something new? Can I add a "c"clip?

@jonharrison7160 7 ай бұрын

Great Video. My Tiffin bedroom is similar expect the bed is on the slide side and runs out a lot further. Question: I live in very dry climate and with my advanced age my skin is also very dry. I can NEVER complete a cycle on the Schwinkek w/o it stopping which probably messes with the sync. Do you have a suggestion for improving skin to panel surface contact?

@allanctot4321 4 ай бұрын

What size rivets do I use on my 2014 thor ace 30.2,or can I change to screws/bolts?

@heathermckinley4164 4 ай бұрын

We purchased an rv last summer. The slide room is tilted downwards. When closed the top of the slide is tight to the rv. The dealership refuses to see a problem instead their solution was to put rollers under the counters in the slide.

@Fisherguy01 Ай бұрын

Good video but another camera showing xlose ups of the work and maybe some footage from inside the trailer would be helpful.

@allanctot4321 4 ай бұрын

My thor ace 30.2 had rivets. But they go only into that thin outside skin. We drilled them out. Can I screw into wood board instead?

@traciewilcox7290 15 күн бұрын

I need some help with the slide out floor tracks. I have 5 tracks underneath the slide out floor and 2-3 have come off the tracks. I lIve in my RV which makes it difficult to leave it somewhere for repairs. Do you have a video on how to fix this issue? Please help!😔

@curtispilgreen7641 2 ай бұрын

Question for My RV Works: The rebuild kit from Lippert has two small rivets and two plastic rivets which hold the bearing blocks in the H column. Why not secure the bearing blocks to both sides of the H column with four small rivets?? Is this a big deal?? The plastic rivets seem so flimsy. Please advise. Thanks.

@bartfranklin1358 7 ай бұрын

Thanks for the video Darin. What is the name of the RV park where you performed the work? It’s very nice.

@MyRVWorks 7 ай бұрын

www.scenicwa.com/poi/salt-creek-recreation-area

@SLICKW1993 4 ай бұрын

I ran into the same problem, bought replacement bearing block that had the upward fin and mine was the downward 😡 Can you only source the racks through Lippert? I need to replace all of mine, they’re chewed up from the broken spur gears.

@andyrandolph3844 Ай бұрын

How reliable are the aftermarket slide out motors? Someone commented on another video to try not to use the motors made in China. The Lippert motors are not US made either. Do you have a preference?

@ajautoanddiesel8576 7 ай бұрын

I had a Tiffin in and the slide room had double racks on the top. What do you think you think they’re trying to fix a problem

@fredcroad331 7 ай бұрын

Question, why would my slid room start to chew up the wood under the room. Only one roller and where the room stops when closing. Roller does turn. Thanks

@ginnyi9991 5 ай бұрын

can you come to Texas please...... LOL

@MyRVWorks 5 ай бұрын

What part of Texas? We started a business near Wichita Falls. Got tired of the 120° Summers LOL. Some of our favorite restaurants are down there though.

@kevinlauzon7665 5 ай бұрын

Thank YOU for another great video that will help change my schwintek CRAP!!! Unlike you, Ido NOT "Love" Lippert. I DESPISE Lippert for producing such sub-standard product which is purposely designed to fail so quickly so they can make stupid amount of $$$

@billjones1201 Ай бұрын

The Biggest Problem is That The Factory Does Not Always Install Rollers Underneath . And When They Do They Don't Carry Any Weight Because the Slide is Not Installed Plumb with The Coach . When Properly Squared and Leveled With The Coach and Riding on Several Rollers .They Will Last The Lifetime of the Coach .

@GolfMissouri 6 ай бұрын

Why replace it with a Lippert? They have proven inept. Vroom is a better design by far.

@kevinlauzon7665 5 ай бұрын

Vroom won't sell a kit directly to a consumer. I am in Alberta Canada and I would have to drive my 5th wheel down to Vroom Arizona and user MUST take their RV to them to get replacement. When I called them, they are booking for Sept 2024 right now and I was quoted $4500 for replacement kit. (3 times the price of Lippert) but I suppose if you never have to replace it every year like Lippert's crap, it would be worth it.