Scrap Yard Salvage - 115LB Welder Melt - ASMR Metal Melting - BigStackD Bulk Bars

No video

Scrap Yard Salvage - 115LB Welder Melt - ASMR Metal Melting - BigStackD Bulk Bars - Copper Brass AL

Рет қаралды 417,201

Күн бұрын

In Todays video I cruise over to my local scrap yard which is only a few minutes away from my house and I grab myself a nice big welder. It was a hell of a breakdown of this piece and 3 melts to get it all sorted so I really hope you all enjoy this one. Now sit back and take a well earned break and let me know if you enjoyed in the comments. And i hope to see you all next Friday😁 .
***** *
20% OFF RINGS & BRACLETS Simply use the code word DION on this link
gthic.com/?aff=27
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
5% Off a furnace ,Burner, Full set up or Forge and a heap of start up info and links email me on bigstackddddd@mail.com
*********
Now Guys if you Feel like supporting the channel it wont cost you a cent as you can Simply just donate some of your time. By just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways and more treats for the dogs👊🏻😄. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻.
*********
461KG Motor Melt Down 34 minute Video
• 461KG Massive Motor Me...
**********
BigStackD DUST MELT
• Metal Dust Melt Down -...
**********
Follow me on Instagram for more behind the scenes pics.
www.instagram....
**********
LIFTER BUILD VIDEO
• WHATS THE TOTAL START ...
***************
AWESOME CUSTOM STEEL STAMPS FROM ALINA
www.etsy.com/s...
*******************
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online KZfaq name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
***
********DISCLAIMER****DO NOT TRY THIS AT HOME****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
**********************************
My other 345+ videos
/ bigstackd
********
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
• Forging Crucible Tongs...
*****
Follow me on Facebook
/ bigstackd-casting-2935...
********
Forge supplied by my friends at Devil-Forge.
Dont forget to email me for a 5% discount link and a heap of info to get you Started😁
*********
FURNACE SETUP 4KG
• Copper melting in bran...
FURNACE SETUP 10KG
• Devil Forge 10 kg Ligh...
TEMPERING CRUCIBLES - Pauls Garage
• How to Temper a Graphi...
GAS USAGE AND SPEED COMPARISONS ON ALL 4 DEVIL-FORGE FURNACES
• 4 Melts 4 Pours 4 Poun...
WHAT YOU NEED TO START MELTING METAL including LIFTER AND TONG BUILD
• WHATS THE TOTAL START ...
LEARNING TO CAST VIDEOS - Swdweeb
• Learning to cast metal
AWESOME CUSTOM STEEL STAMPS
www.etsy.com/s...
COIN MOLDS & CUSTOM COIN MOLDS LAS VEGAS - ArtByAdrock
artbyadrock.com
CUSTOM COIN MOLDS NEW ZEALAND & AUSTRALIA ONLY
/ eccentrickiwicreative
PETROBOND SAND AUSTRALIA ONLY
www.greensand....
***********
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it.
*****
#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
#dumpsterdiving
#scrapyard
Scrap Yard Salvage - 115LB Welder Melt - ASMR Metal Melting - BigStackD Bulk Bars - Copper Brass AL

Пікірлер: 885

@bigstackD 2 жыл бұрын

Hey there all you awesome people how are you all this Friday? Today was a quick trip to the scrapyard for a nice heavy welder which had a great metal haul for me. 3 melts in today's video and a bit longer than normal so sit back relax and I hope you all enjoy this video and hopefully I'll see you all next Friday😁

@ilikechamp3086 2 жыл бұрын

Hello Friend I enjoy watching your video every time Until the last video ^^ What is the purchase price per kg of the welding machine purchased in today's video? Have a nice weekend 🇰🇷

@Bruh-qo9pt 2 жыл бұрын

It's like 3:30 am in America right now and I was about to go to sleep then this vd was posted so I guess no sleep.

@maxxtoan8596 2 жыл бұрын

Just a mornal day to me

@Gentlemen_london_ 2 жыл бұрын

😎👍

@martywright1829 2 жыл бұрын

Those socks would be good for winter mate keep each toe warm 😂🤣😁now I know who you are HOMER SIMPSON👍🏼👍🏼👍🏼DOH Or BART. EAT MY SHORTS

@rozsmith369 2 жыл бұрын

I laughed so loud when you ‘carefully’ extracted the brass from the plastic 👍🏻

@michaelkemmerer1 2 жыл бұрын

Yeah. Did I hear some glass shatter on the second knob?

@Mastubastique 2 жыл бұрын

@@michaelkemmerer1 i'm sure you did =)

@God_Yeeter 2 жыл бұрын

He did do it carefully, he smashed it with a sledgehammer instead of blowing it up or yeeting it into the forge

@shanemcguire170 2 жыл бұрын

Precision Extraction Equipment: Sledge Hammer, 24Oz Ball Pene Hammer, other heavy blunt impact extractors. Bwhahaha!

@rossthomas7425 2 жыл бұрын

I was chuckling as I read it as well, I was saying "yeah, right" as the hammer fell.

@JohnWicksPencil14 2 жыл бұрын

This guy doesn’t miss a beat. Every Friday morning I get my dose of melt therapy :)

@michaelmessina5341 2 жыл бұрын

I start every Friday morning with a cup of coffee, a big fat bowl of some good smoke and melting............

@JohnWicksPencil14 2 жыл бұрын

@@michaelmessina5341 this is the way

@bear1245 2 жыл бұрын

@@michaelmessina5341 gods work my man

@Babyjohn8170 2 жыл бұрын

@@michaelmessina5341 absolutely! Best way to start the day.😃👍

@Redneck_Hero 2 жыл бұрын

Been watching him awhile. Really thinking of taking this up as a hobby. Start melting my own shit lol

@robertgolden1080 2 жыл бұрын

I love the surgical precision and delicate procedures you use in the disassembling.

@myarmsrgone 2 жыл бұрын

Every surgeon's best tool: sledgehammer

@Littlelurch85 2 жыл бұрын

It still blows my mind to see copper boiling. And then watching it freeze over in mere seconds. Love it.

@sidslick1 2 жыл бұрын

Loving the "now I must carefully extract the brass"........ with a chuffing great hammer!!!! 😅

@ollieleeb 2 жыл бұрын

I’ve never done any melting stuff in my life but I’ve been watching you so long now that when I watch other peoples videos, other smelters, and they don’t skim it properly or leave lumps in it it really annoys me! Keep on leading the way Mr Stackd 😂😂

@gunshipmlr00 2 жыл бұрын

That tap to to get the aluminum to start freezing was just 👌🏻

@choknm2 2 жыл бұрын

wait... his first name is big?

@BoomerKeith1 2 жыл бұрын

Great video, as always! One of the things I always appreciate about your videos (and melts) is that you take things that would otherwise end up in a landfill somewhere and break them down, recover the metal you want, set aside the steel for your friend and recycle the plastic. You're not just making cool stuff and great content, you're also helping the environment!

@oges74 2 жыл бұрын

You have a lot of patience when it comes to breaking down the piece, and love the specialist tools you have for those tricky parts. A great melt of the trio of metals, the copper ingot looked real nice

@bradameerbeg2154 2 жыл бұрын

I love the way the copper turns out.

@snezyanuz8964 2 жыл бұрын

He does have ALOT of patience I actually didn’t notice that till this comment lol

@exidy-yt 2 жыл бұрын

Was almost exactly what I was going to post, so now I don't have to! ;-) Great triple melt, BsD!

@RCake 2 жыл бұрын

U loved the unscrewing macro shots, very cool idea - gave this vid a special atmosphere 👍

@Babyjohn8170 2 жыл бұрын

This channel is the Awesome! I Never get tired of watching or rewatching videos.😃👍

@codybaker3584 2 жыл бұрын

This channel is so relaxing it's hard to even articulate. Please don't change a thing. I look forward to this every Friday

@patrickschoenpflug 2 жыл бұрын

Wow your slowly edging towards two million subscribers unbelievable I remember when I first subscribed and you had maybe over five hundred subs and now look well done BigStackD you deserve it your channel is great always a pleasure to watch. I love these trio ingot melts especially when copper is involved many thanks again for an awesome video 👍🏻👍🏻😊😊😄😄😃😃😁😁

@johnnyrotten4535 2 жыл бұрын

I used to love that movie when I was younger, it's a classic!

@delaynedelange9955 2 жыл бұрын

I have never been so invested in a KZfaq channel in my life. Also, could you make a metal square that's perfectly smooth?!

@jamiestarr3086 2 жыл бұрын

Ah, your videos are so relaxing to me. I used to be a big scrapper back in the day and it's WORK. Some jobs just aren't worth the work if you don't have the right tools

@richkh 2 жыл бұрын

As a non-Australian.... during the teardown, I kept expecting some horrifically venomous spider to crawl out from some corner.

@Lucydius 2 жыл бұрын

Happens all the time :D Just normal to squish and move on :p

@hoopsm6106 2 жыл бұрын

Thankfully he puts in a warning! Otherwise I would be anxious the whole video I hate spiders😁

@henrykirkland3510 2 жыл бұрын

Yes, please keep posting spider warnings, mr. Bigstackd. They are very appreciated!

@hystericallymad 2 жыл бұрын

long time viewer. love your videos. the addition of the water bath adds some interesting sounds. thanks for your content.

@joshuajackson6442 2 жыл бұрын

Thank you, I love the pour lines and the crystallization on top

@pneudles3689 2 жыл бұрын

This is always perfectly uploaded when I go to bed and I absolutely love that. It's always perfect when it comes to getting me wound down!

@Ams-se9tb 2 жыл бұрын

Another awesome video 🙌🙌🙌 If you look at the copper after the mold is taken off at 16:25 it looks like a signature 👀👀👀🤔 love your videos man 🍻🍻🍻🍻

@bobulele 2 жыл бұрын

Saw the same! I thought it said J. D. Peck.

@smie3907 2 жыл бұрын

9:06 i love how he goes after every little bit of shiny metals, like a little metal goblin, i like

@Bu2Spike 2 жыл бұрын

I always love how copper turns out. Love the look of fresh poured copper, nicely done mate 👌

@tomahawktom7595 2 жыл бұрын

You did a great job at carefully extracting the brass from the plastic I commend you for your delicate touch

@docschro6847 2 жыл бұрын

Anyone else love the fact the when the phrase "gently extrat" is used we automatically know there is going to be a big hammer involved

@susanserwatka931 2 жыл бұрын

Hey D, this tear down looked like a pain in the ass. That was a lot of work, but I enjoyed it tremendously. I always enjoy watching you regardless of what you're doing. This video was a half-hour long, but it only felt like 10 minutes to me. Time truly does fly when you're having fun! 💙✌️

@shepshepson 2 жыл бұрын

10:00 "I will just carefully extract the brass" *starts hammering brass pieces into oblivion and shatters a window* I love the little comedy skits you put into all your videos it's pretty amazing 😂😂

@Babyjohn8170 2 жыл бұрын

I liked when you showed the camera angle separately when you poured the copper. Simply beautiful!😊👍

@lateefcarrere1649 2 жыл бұрын

The different shot angles in your videos are always top notch...and dig those bright yellow socks! Always time well spent watching a #bigstackD video!😁👍

@wesleyehowell 2 жыл бұрын

I always enjoy seeing the copper take on its familiar color as it cools down. I always enjoy saying hi to Ingot and Bullion too. Looks like they're enjoying the sunshine! Too bad the frame inside the welder was steel rather than aluminum.

@shaunharris7738 2 жыл бұрын

Merch line looks mint.. will have to make a purchase

@gunshipmlr00 2 жыл бұрын

I had no idea that metal could boil. Insanely clean pours this week! And finger socks too…looking into those bad boys now.

@I_Don_t_want_a_handle 2 жыл бұрын

Every element has a boiling and freezing point. Still weird to see it, mind.

@gunshipmlr00 2 жыл бұрын

You’d think I would have known that but nope lol I figured metal only had a melting point. Glad I learned something today

@jasonwright1687 2 жыл бұрын

Missed the last few videos ... I have been stranded in Barstow, California. Engine blew up (rod and piston thru the block).... Watching this while my phone temporarily has power to just calm down and get my mind off the stress and anxiety of being stranded in such a dangerous place. Tons of love to you, your family, and (of course) those adorable puppers. 🤘❤🎉

@dukenukemani07 2 жыл бұрын

Good morning from the USA! Didn't have much time before I had to get ready for work, but just enough time to check out this new update. 👍 Didn't know arc welders had fans inside them... 🤔 But, given how much power they use, I guess it shouldn't be a surprise. 😎

@RIPbiker13 2 жыл бұрын

No joke, I love Friday for the weekend starting, staying up late, and my dose of bigstackD!

@7KidsSpanoMan 2 жыл бұрын

I wasn't even anticipating you melting the brass. Extra bonus, and a second CHEERS from me. ;)

@Bodacious_Crustacious 2 жыл бұрын

I swear to God, Blacksmithing will be one of the most powerful skills to have during the apocalypse.

@marsguyphil 2 жыл бұрын

I like how there's no bit of brass TOO SMALL for D to recover, as long as he can do it by whacking the housing with a sledge.

@jonathannorthup5705 2 жыл бұрын

I wish I was a fraction as organized as u bud nice one! I'm a welder by trade so it was really cool seeing you break one down 👌

@sofiatgarcia3970 2 жыл бұрын

I appreciate that you always show us the boys. They obviously have a wonderful home!

@tothedmond5259 2 жыл бұрын

This guy's work, really gives me Friday vibes!

@blackburngaming8345 2 жыл бұрын

I love how when he hits the brass in the plastic one gets sent flying, and a glass object can be heard shattering.

@Speech_96 2 жыл бұрын

Love the "motor" and "glass breaking" moments

@caseydarrah 2 жыл бұрын

I'm starting to become convinced you're actually not human, BigStack. No mortal can back out rusted flathead screws like that without camming out.

@geo2cv6tron14 2 жыл бұрын

It's impressive the amount of different metals that can be found in a simple welding machine

@kennethberry3687 2 жыл бұрын

The boys are just enjoying the dog days of summer. Nice!

@vickysangani1302 2 жыл бұрын

wait is over, friday os here.. HAPPY HOLI TO ALL...

@BlackDogHair1 2 жыл бұрын

Interesting to see how far and lighter welders have become. Haven't seen a welder like that in a while.

@fendi_vex420 2 жыл бұрын

Another great video, love how much effort you put into the content🙃

@drinkintea1572 2 жыл бұрын

My bunny passed away last year, im happy that youtube reminds me that there're other bunnies that are happy too.

@marciabaldwin2506 2 жыл бұрын

Excellent video as always really enjoy watching them Thank you for the meltdown 😊

@ScrewyGirl 2 жыл бұрын

I think a good bit of the fun is taking things apart!

@davidpenta4274 2 жыл бұрын

Dont know why but i always wait for the ice block smash. Makes me laugh every time! Also great job on the vids! Keep up the great work!

@gabrielwohlffe8124 2 жыл бұрын

Always love seeing the wall of metal's. I swear, u probably got a quarter to half a million worth of relatively pure metal. Looking forward to when u make it to ur goal and can celebrate a huge milestone!

@mkhuntstreasure3192 2 жыл бұрын

You are becoming very artistic with photography-nice. Beautiful bars.

@617Pimpin 2 жыл бұрын

Its a pleasure to always watch your videos. I just got married and we are watching your videos. Keep up the great work.

@Anokaman 2 жыл бұрын

Thank you for keeping those wheels for later! You never disappoint sir!

@stephenkeefer3436 2 жыл бұрын

That’s a lot of melting without a BigSnack! Never realized how dirty a metal, brass is. Cheers

@ricplays5905 2 жыл бұрын

I don't know why but i find this really relaxing, I've seen a lot of your videos and i have to say i'm impressed, you don't miss a single upload! Well done!

@mikep8080 2 жыл бұрын

The best part and most relaxing part is unwrapping a million screws just to get to the goodies inside your Christmas box

@NeverEvil1 2 жыл бұрын

🐐 You are the GOAT, of melting. Had me on the edge of my seat waiting for the ice break, but the boys playing at the end made up for it.

@homeyshlitz 2 жыл бұрын

Alright BigD, you got way more out of this melt than you did off of last Friday's motor. I find it interesting that one of the aluminum ingots ended up with a good sized bump on it. Usually you get a depression on aluminum.

@voidwalker3919 2 жыл бұрын

I actually got a question, do you ever plan on doing something with a more precious metal, I'm sure over your time of melting salvage down you must've come across gold...silver...platinum, things like that. I'd honestly be really interested in a vid like that. Anyway this vid was amazing and really relaxing, I love watchin your vids before I go to sleep!

@schultheismatthius 2 жыл бұрын

Yes, he's come across some of these more precious metals, especially electronic melts. He keeps the metals safe somewhere but I don't know if it's worth it to melt it and possibly lose some weight or just keep it as it is and maybe sell it.

@rockwilder0 2 жыл бұрын

Trouble with recovering gold and other metals, is that there are a lot of chemical processes that are required for the extractions. So, might be a little out of his price/experience level to be able to do that. There are others on KZfaq that show how it's done. Seems pretty involved to me.

@Wilkidw 2 жыл бұрын

There's a video from probably last year where he melts a .999 silver bar.

@drugmonster6743 2 жыл бұрын

My favorite restoration channel

@kieranpickavance2584 2 жыл бұрын

Great sense of humour, calming and interesting content, now I'm hooked, happy day's, cheers 🍻

@Vbird003 2 жыл бұрын

When you ever decide to get new firebricks that's gotta be part of a video.

@Nobe_Oddy 2 жыл бұрын

CONGRATS ON THE 350 VIDS BRO!!! AND YOU KILLIN THOSE SUBS!!! I can't believe you're up to 1.2 Million ALREADY!!!! WOW!!!!

@captainjerk Жыл бұрын

Awesome project today buddy! Showed that welder who's boss! LOL Sweet bars from that welder! The copper and brass are my favorite, bit I still like the alli too! Toe socks! LOL Thanx for a great vid D!😁

@typhoon2245 2 жыл бұрын

I love the 'lets try to pry it off reasonably' approach...Ok, sledgehammer time.

@steambootboy4277 2 жыл бұрын

Best KZfaq Channel EVER! Doesn't care about subs only about his goal of 1t metal. Also he doesn't just show his projects he also shows his daily stuff like his cute dogs or how he relaxes. Keep doin it! You're doing it right!

@jonny9 2 жыл бұрын

I love watching your videos. You inspire me to want to do this so much. Thanks for all of the tips you share along the way. And I love how you include your babies.

@starlight4649 2 жыл бұрын

Hey again bigstackD I've been watching your videos for over a year now and I finally went out and built myself a set up that I can use, and it worked great! It's just 2 plant pots and some sand but I was able to make some Zinc aluminum alloy in it and Im going to try casting a custom axe out of it as soon as I can get something to make a mold out of Thanks for all the entertainment, These are all really great to watch and they definitely kept me from making any dumb mistakes while casting

@AwakenedBelngs 2 жыл бұрын

11:09 that ding was incredibly satisfying lol.

@thejake4145 2 жыл бұрын

I like to pull all nighters Thursday evening so I never miss an upload. I don't know if its just sad life or dedication to the view at this point

@tmn612 2 жыл бұрын

Definitely dedication 😂🍻

@matthewcalderon5797 2 жыл бұрын

I'm glad KZfaq recommendations brought me to your channel. Perfectly satisfying content for the end of my days lol

@marcuscato9083 2 жыл бұрын

Sure hope you mean the end of your workday.

@adboshop 2 жыл бұрын

"Careful brass extraction" - I like that... 🙂

@SollersScrappingandDiving 2 жыл бұрын

Loved it, my favourite was the copper bar even though it was a stubborn one! You should have an ewaste made 1M gift from me any day now dropping into your PO box, peefect for a cold beverage 😉better late than never 🙈 Thanks for another fab video, definitely the highlight of my Fridays!!

@clarencethompson88 2 жыл бұрын

That was probably the cleanest copper smelt I've seen you do, I don't think you even scooped and slag

@Gh3ttoboy 2 жыл бұрын

Yeah Copper wires tend to be pure copper no slag at all 99% of the time

@sowde3645 2 жыл бұрын

I like how he "carefully" extracts things

@snezyanuz8964 2 жыл бұрын

10:20 that worked surprisingly well lol

@Coins1969 2 жыл бұрын

You were like a surgeon when it comes to taking apart stuff.

@thomasvlaskampiii6850 2 жыл бұрын

I just find it amazing that out of that huge welder, only roughly 9% of it is not steel. That steel in that transformer must've been the vast majority of the weight

@Archiemonty 2 жыл бұрын

16:15 NICE! now you have two fire bricks and didn't have to pay a thing for the second one..

@studmail0 2 жыл бұрын

Your videos have me getting excited about wire lol. I saw all that on the beginning and though "oof gonna be a good one" just to have my hopes and dreams dashed when you said not for you haha. Great video as always

@garysmith4562 2 жыл бұрын

Really enjoy your videos. Thank you. Keep up the good work.

@taylorj4566 2 жыл бұрын

It is so satisfying when you don’t have to grind out the copper!!

@L3V1T8-84 2 жыл бұрын

Another great video, every single time you never disappoint. Have a great weekend.

@manwithanamethystheart 2 жыл бұрын

"I will carefully remove the brass from the plastic!" Smack!! 🤣

@172turtla 2 жыл бұрын

12 minutes until we see the boys??? They are looking cute. Good work on the welder. That thing has a lot of design and engineering, loved how you took it apart.As always great forging.

@butterybiscuit346 2 жыл бұрын

When the doggos lie down like that, it just makes me think of oven roasted chicken.

@barryballbag2361 2 жыл бұрын

Love the 10 mm socket is taped up to the extension bar !! Great video

@mrssrout 2 жыл бұрын

Just imagine the amount of valuable resources we throw away each day. This should be done in a scaled manner to recycle them. Great work.

@noormalik9761 2 жыл бұрын

i am completely addicted to your channel ever since i found it. Loads of best wishes from Pakistan!

@steveaubinofangers7391 2 жыл бұрын

I ran out of propane for the first time I was 3 minutes away from pour so next melt is a re remelt..... Froze up the last 4 pounds and pressure started dropping. I did however get one solid repour before that bar Soo still a good day. Also now I know my 30 lb propane tank weighs 50 lbs full and 20 empty. Can't wait for tomorrow's video.