Tricks for making small scratches in machined aluminum disapear!
Пікірлер: 57
@MrDavidkowalski117 жыл бұрын
I had scratched up my aluminum Graflex replica a tad while doing some work with it a few weeks ago, and I was seriously fretting it. Very happy with this method, thanks Custom Saber Shop!
@eddyboh2723 Жыл бұрын
Is there a way to remove the scratches from aluminum without eating the aluminum away? Because I woukd like to maintain the same thickness of the alloy and not reduce it
@thegardenofeatin59655 жыл бұрын
Don't use steel wool on aluminum. Bits of it break off and embed in the aluminum, and will eventually rust.
@JavierFernandez0111 ай бұрын
aw shit.
@HappyGirl7074 жыл бұрын
This looks great! I will head to Home Depot tomorrow!
@RowdyBush3 жыл бұрын
Nice video. Same thing apply for polished aluminum?
@donadams55283 жыл бұрын
I'm going to do this to my crome gary fisher bike.thank you very much!
@heatherevans29204 жыл бұрын
Looks very nice thank you
@Cosmowarrior697 жыл бұрын
I have one master series 2007 with little scratches can i try to repair it? the steel wool is type 00 the same that is used for wood? the sand paper is 1000 or 800? Sorry i'm Italian. I like your channel bye.
@boblafountaine95606 жыл бұрын
I don’t know about anybody else, but I can still see the scratch. Sorry, no reason to lie .
@bellaphone57196 жыл бұрын
Robert LaFountaine you must have 20/20 vision my friend
@AnimalExplorer5 жыл бұрын
@@bellaphone5719 I can actually still see the scratch myself too.
@whowatwhere79364 жыл бұрын
Same I see all de scratches more than the start
@simpleagain1 Жыл бұрын
@@bellaphone5719 -barely. You gotta look really hard to see it. No one will notice at a glance
@TheThomasHo8 жыл бұрын
My golf addicted, 3 year old toddler, recently took 3 of my golf clubs and started to swing them against our concrete driveway. As a result, the chrome heads were severely scratched. My club fitter/repairer said they cant save them. I then searched and found your video and followed your instructions to the dot, finally finished up with Autosol Chrome polish. The results were excellent, 95% back to the condition before my kid got hold of them, the Chrome finish is dulled, but extremely smooth and most importantly very playable. Thank you for your video.
@MadcowGenesis8 жыл бұрын
+thomas ho I'm so glad it helped! I have young kids too and know how it is.
@eddyboh2723 Жыл бұрын
@@MadcowGenesis Is there a way to remove the scratches from aluminum without eating the aluminum away? Because I woukd like to maintain the same thickness of the alloy and not reduce it
@rafiullah9858 Жыл бұрын
@@eddyboh2723no it is not possible but may with by some polish machine will happen to make it
@kiancabarle1237 жыл бұрын
can I do this on a yoyo?
@metalhead_199610 ай бұрын
what if you’re sanding on a level chrome metal plate? my goal is to make all the scratches disappear, since the metal doesn’t have a grain on it
@Wowwwzaaa5 жыл бұрын
Can I just use steel wool
@bradcornish42697 жыл бұрын
at the end the whole piece is just covered in scratches....
@lmm62303 жыл бұрын
True
@KretinzUnited3 жыл бұрын
Exactly
@simpleagain1 Жыл бұрын
Looked good to me
@Minadarling1195 ай бұрын
😂
@SirBJH6 ай бұрын
Does this work for dark burns?
@tetsushigoda22 Жыл бұрын
It seems better to use liquid compound of 3000 grit then 6000grit. 9000 will make it mirror polish.
@pikapat3217 жыл бұрын
My saber is the default finish, and has a few light scratches anything for that?
@MadcowGenesis7 жыл бұрын
The steel wool will work
@prudencemhlanga50027 жыл бұрын
what can i use to remove scratches from aluminium window
@JavierFernandez0111 ай бұрын
i used a screw. more scratches to make sure the 3 was illegible and give the steel wool a head start. then the steel wool until the middle was smooth. you can still see the other scratches but the 3 is definitely smoothed to blank polish. a nice sticker would look good over it now. its just a random blemish now. way better.
@telosfd2 жыл бұрын
Polishing paste maybe!
@sahinkarabulut30756 жыл бұрын
Hi, I would like to ask that how can repair a bit deep scratch from my bicycle fork leg? It is in yellow color. ( not exactly like gold color but, similar)
@eddyboh2723 Жыл бұрын
Is there a way to remove the scratches from aluminum without eating the aluminum away? Because I woukd like to maintain the same thickness of the alloy and not reduce it
@MadcowGenesis Жыл бұрын
These methods will not noticeably reduce thickness
@eddyboh2723 Жыл бұрын
@@MadcowGenesis But it does little by little
@roundhousetrainspotting8 жыл бұрын
How do you get scratches out of powdered effect aluminium? many thanks
@MadcowGenesis8 жыл бұрын
I'm not sure what you mean. If you mean powdercoated... there's not much you can do. Like wise if you mean media blasted or textured. Some people choose to go for a weathered look and add more scratches.
@roundhousetrainspotting8 жыл бұрын
+Rob Petkau yes I mean powdercoat and I don't want to weather it.
@MadcowGenesis8 жыл бұрын
Find a similarly coloured model paint?
@roundhousetrainspotting8 жыл бұрын
+Rob Petkau I'll try that thanks
@brendakhomo31673 жыл бұрын
hi, I have a silver bmx frame that has deep scratches so I have been trying to come with a way of removing the scratches do you perhaps have an idea of how I can do so
@MrKinkysloth3 жыл бұрын
Same boat as you
@petersrightbut82977 жыл бұрын
yea, now do the whole part.
@Faksnima Жыл бұрын
They were still observable.
@Whatsthevibe699 жыл бұрын
Rob??
@MadcowGenesis9 жыл бұрын
Yes??
@Whatsthevibe699 жыл бұрын
i've only been subbed to the tcss channel for the past 2 days, and i hadnt seen any other vids. but i noticed ur voice in this one, and then i watched a lot of the videos on this channel, and clued in, lol.
@rafiullah9858 Жыл бұрын
you did make a lot of more very small scratches which is by mechanical engineering is very harmful for metal and for other metal which produced iron dust which create a lot of resistance due to iron dust
@TheCustomSaberShop Жыл бұрын
Most of our parts are aluminum. Not iron.
@bmcarden87 Жыл бұрын
Should be titled how to ruin aluminum.
@Cosmowarrior697 жыл бұрын
I have one master series 2007 with little scratches can i try to repair it? the steel wool is type 00 the same that is used for wood? the sand paper is 1000 or 800? Sorry i'm Italian. I like your channel bye.
@MadcowGenesis7 жыл бұрын
You can try. Go slow, do little bits at a time to see how it's working
@prudencemhlanga50027 жыл бұрын
what can i use to remove scratches from aluminium window