Screen - (Grizzly) - (Multi size boulder separator)

Рет қаралды 217,473

Jayaprakas Pv

9 жыл бұрын

With this screen different types of boulders can be separated by a single operation.

Пікірлер: 16

@Teddy_Bass 6 жыл бұрын

That is pretty cool. No engines, belts, or gearboxes

@thor4224 4 жыл бұрын

Jimminy Crickets get some water in that pit!!

@horseedbuildingcompany4236 4 жыл бұрын

Where can I get the drawings / sketches of this static Grizzly screen?

@johanandersson2165 6 жыл бұрын

what does Neptune has to do whit a rock separator ?

@wallsthunderman6032 6 жыл бұрын

Maybe this is what they are doing in Neptune lol

@rupamsharma5990 2 жыл бұрын

Mzah gan logaise dada

@sunilpatidar480 3 жыл бұрын

Gravity based

@joshwipf190 4 жыл бұрын

Very good going to Build one just like that what is the degrees of the grizzly Bars

@kaustoovmitra1260 3 жыл бұрын

Between 20-50° with the horizontal.

@bonks4395 6 ай бұрын

52* to 55* is optimal. 45* is too shallow and loads up rock, clay, vegetation. and 60* is too steep which causes material to slide too fast across screen carrying fines, causes excess wear upon metal surfaces, and reduces the footprint of the screen impact area. In this video they are using round river rock which yes can use the shallow angles, but if you are using angular rock, flat rock, clay, or rock/soil materials you for sure want to go for the 52-55 degree angle. Be sure to use the T profile bar so it won't clog up, round pipe and angle iron is a sure way to get clogged. Some people have success with square tubing set as a diamond on edge, but the T profile is better than all other shapes

@hamidmob3425 5 жыл бұрын

HOW can i have more detail about it? i would like to have one :)

@ultrasonicvibratingscreen8669 4 жыл бұрын

if you have any questions you can send email to me email:tujingli@gzvibratingscreen.com

@timdunk7278 8 жыл бұрын

You cut out how perfectly the first section of bars plugged up as the dump truck dropped its load onto it. Thumb down.

@jayaprakaspv 7 жыл бұрын

Dear Tim, Its load is not hitting directly to the bars, another strong base is preapreaded for receiving the material and provided with maximum slope for easy movement of material. Thank you for your itrest and comment.