Thank you, Danny, for the detailed video! You saved me $500. My G35 was giving out all steering wheel controls one by one, starting with cruise controls a few years ago. Didn't bother much until the horn gave out. Finally, replaced the clock spring and everything is working now. If someone is reading this, watch out when removing the T30 type bolts. Do not use power tools. They were so tight in my G35. I thought I could use my power tool. A big mistake. I stripped one of them. I had to use a bolt extractor to get it off.

Thank you thank you thank you dude! We were about to be charged over $1,100 for the diagnostic and box spring change. And that wasn’t even a guaranteed price 😢 Keep up the awesome and informative videos!

i was watching this after replacing mine because everything but my horn was working. figured out that the little ground wire is what i forgot to reconnect. thanks

Can't even tell you how much you've helped me with past fixes with your videos. You're awesome man, one of the few people who know how to make clear and detailed videos on fixes for common problems

Took 20 mins! Excellent! The shop I went to said 3-500$ minimum…. Doesn’t look that difficult to complete tbh! Thank you

Excellent video! I will say that if you don't want to buy the specialty tool to pull the steering wheel off, a few good tugs will do the trick to work it out. It's pretty sturdy so you won't really damage it.

Mechanics are like surgeons! 👏🏽👏🏽👏🏽👍🏽

Great video, very well done. I was able to do this in about an hour. Thanks much brother, you saved me time and money.

Thank you! I was able to replace the clockspring on a 2008 nissan rouge.

Thanks to you, just finished changing mine.

Thanks Danny, this video worked perfect, you're a lifesaver!

Great tutorial Followed through the whole way. I now have my horn and steering wheel controls. However there seems to be a problem with turning the car on now. It turns but don't think it's getting any spark. Fuel injection fuse is still good. Thinking it's got something to do with the car being stuck in security mode or something. Fx35 2006. Thank you

Looking at this I'm sure this is definitely the reason my horn isn't working.. Thank you for your video..

Thank you very much this fixed my airbag light..your the boss!!

Great video! I have this exact problem with my 2005 G35 sedan

Just changed the clock spring in my 2012 Nissan Sentra... seems to be a very common problem. The controls on the wheel were slowly giving out one by one and then the horn stopped working. Thanks for the tutorial, mine was a little different from yours but It was very easy to do and costed me $22 for the clock spring instead of having the dealer do it for $800

Very nice video I have a 05 g35 sedan 6MT black, hopefully this fixes my cruise control and volume control issue !

Your instructions are literally the best. Could you make a video on how to fix the G35 triptonic (manual mode for AT) it’s seems as if the reset doesn’t work, it may have something to do with the shifter itself. Thank you!

1:56 I been waiting for 2 weeks for discount Infiniti parts to actually ship my clock spring. I couldn’t get a reliable aftermarket solution ended up paying $170 for an oem one. I know it’s the problem but until I actually change it it’s nerve racking having 2 air bag lights on

Thank you bro✌🏼

best video instructions to fix something in my car, hope make some more for nissan's

Tyvm sir you save me $700 i spend $80 total part n tool less then 1hr tyvm again fix my honk n radio buttons

Keep up the good work

Great video. Thank you

I need help! Does a combo switch have a Clockspring accessory attached to it?

do you have a link for the clock spring?

Thanks for the how-to vid! My horn works now, but my airbag light is still flashing...looks like I'll have to check the airbag connections.

Anybody know if the 350z clockspring is the same one as the g35 clockspring?

Where did you find the part?

Where did you order part from

Can those bezel parts be adjusted without taking the steering wheel off? Staring at 8:25 on the video. Mine are misaligned and make steering slightly harder. ( Just services power steering fyi). 2003 Nissan Altima.

What's the NISSAN OEM part number?

U don’t need the puller tool. Just smack the wheel a few times

can i grab one from a parted out car?

Dude! I had this problem happen to me 3 months before you posted this video and lived with it, because I wasn't sure if it was my problem. My speed control doesn't turn on anymore, and my horn only honks when I turn it at least a full turn, and my horn does work because of my alarm, so that's all it is a clock spring?? Thanks, I knew it had something to do with that

What's the black plate for that you transferred to the new clock spring

By any chance would you have a Part number for the Clock Spring? 2005 Infiniti G35?

Can you give a link for the 2005 g35 coupe I heard they are different that 06

My horn randomly honks on it's own but not when the car is off and parked unless I move the steering wheel sometimes. I have a aftermarket steering wheel and horns. What could be the issue?

What is that black circle thing that you switched over to the other clock spring?

VDC and slip came on after replacing clock spring on my FX35. Any recommendations?

Where did you buy the clock spring from

Dealing with this right now and my torx screws seem to be stuck smh!

Hello, I recently had my clock screen changed,but didn't come with steering angle sensor, switch the old sensor with the new clock screen. Issue is the horn did work,but the steering was hard to turn,vdc, slip turned on,also when I make turns there is a roaring like sound underneath the car what can this be?

I changed the clockspring on my 08 Nissan Armada and IT WORKED. MY horn works again! I have a question though, at 11:11 in the video, the old clockspring has a connector that is not on the new one. This was the same on my old and new clockspring. Anyone know what that connector is for? I now have a wire that is not connected to anything in my assembly. Anyone know? Also, my SLIP light comes on and I get a grinding noise from my gas pedal along with a grinding kind of feeling. This stops when I turn off the VDC button. Anyone else have any info on that?

I did the same and my horn still doesn’t work, do I need to do a reset?

I have a Infiniti G35X sedan and the steering wheel buttons light up but don’t work anyone have a idea why?

hey can someone help me... i ended up taking out the clockspring but the position of it that i was suppose to mimic on the other one got messed up nd spun a couple times and i don't know what position it was on and i tried different ones and nothing same issue. is there any way i can reposition it to the same position i had before so everything can start to work again? HELP ASAP

sooo i did this and now my VDC off and SLIP lights are on ... help :(

Horn beeps with lock just not pressing it