SCULPFUN S9 Thick Sheet Cutting Test and Cutting Recommendations Laser Engraving Machine

Рет қаралды 131,953

Күн бұрын

Faster！But How Much Faster? SUCLPFUN S30 5W 10W 20W Laser Cutting Efficiency Comparison Test: • Faster！But How Much Fa...
👉Purchase the Machine on Sculpfun Official Website: bit.ly/3ZDXd1j👈
Acrylic cutting (speed: 100mm/min, power: 100%)
Plywood cutting (speed: 700mm/min, power: 100%)
Wood cutting (speed: 1000mm/min, power: 85%)
If the speed is too slow, the wood material will be scorched, which will reduce the cutting efficiency.
Thicker plate, lower focus position and higher cutting efficiency
In lightburn, copy multiple layers, 1-3 times per layer, to avoid wasting time by repeated cutting
The plate is cushioned by 1-2mm, which is convenient to observe the cutting condition of the plate
The plate has not been cut, do not move the plate and the laser head, do not modify the settings in the software that will affect the coordinates, you can cut along the original path again
With air assist, cutting efficiency can be improved.
Our company's air assist is being developed and designed, so stay tuned.
00:00 Start
00:26 Focus position
00:58 Acrylic cutting
02:46 Plywood cutting
04:19 Wood cutting
06:04 Raise the plank
06:49 Number of passes
09:41 Air assist
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Purchase links: (SCULPFUN S9)
👉Banggood (Global delivery): ban.ggood.vip/107tM
👉Aliexpress: sculpfun.aliexpress.com (Global delivery)
👉Amazon (Overseas warehouse Fast delivery ):www.amazon.com/s?k=sculpfun+s...
👉Amazon (For Europe): www.amazon.de/dp/B09YRPJN2D?r...
👉Amazon (For Europe): www.amazon.es/dp/B09YRPJN2D?re...
👉Amazon (For Europe): www.amazon.de/dp/B09MCYCFQP?r...
👉TOMTOP: www.tomtop.com/p-os5916us.html
👉Geek buying（EU）：www.geekbuying.com/item/Sculp...
👉Geek buying（US）：www.geekbuying.com/item/Sculp...
👉Alibaba.com (Low batch price ):szxiyang.en.alibaba.com/
👉NewEgg: www.newegg.com/p/288-00EY-000...
Purchase links: (SCULPFUN S9 laser module)
👉TOMTOP: www.tomtop.com/p-os5959.html
👉Banggood (Global delivery): www.banggood.com/search/sculp...
👉Aliexpress: sculpfun.aliexpress.com (Global delivery)
👉Amazon (Overseas warehouse Fast delivery ): mtw.so/616JFN
👉Alibaba.com (Low batch price ): szxiyang.en.alibaba.com/produ...
👉Geek buying（EU）：www.geekbuying.com/item/Sculp...
👉Geek buying（US）：www.geekbuying.com/item/Sculp...
---------------------------------------------------------------------------
👉Facebook： / sculpfunofficial
👉Facebook Official Group： / sculpfunusers
👉Instagram： / sculpfunofficial
👉Twitter: / sculpfuntech
👉TikTok: @Sculpfun & @sculpfunreal
👉Official Website: sculpfun.com/
-----------------------------------------------------------------------------------------
Other videos in my channel you might be interested in:
SUCLPFUN S30 5W 10W 20W Laser Cutting Efficiency Comparison Test：
• Faster！But How Much Fa...
SCULPFUN S10 10W:
• 10w | SCULPFUN S10 Hig...
Six Amazing Projects Using SCULPFUN S9 Laser, happy laser making at home:
• Six Amazing Projects U...
SCULPFUN S9 Thick Sheet Cutting Test and Cutting Recommendations:
• SCULPFUN S9 Thick Shee...
SCULPFUN S10 laser engraving machine Unpacking & Assembly Instruction:
• SCULPFUN S10 laser eng...
Three things you should know about air assist（For SCULPFUN S10）| Air Assist | 10w:
• Three things you shoul...
Air Assist | SCULPFUN S9 Air Assist Unpacking and Installation:
• Air Assist | SCULPFUN ...
Official SCULPFUN S9 Air Assist Nozzle HIgh Speed Air Assist and Great Upgrade for S9 laser:
• Air Assist | Official ...
#laserengraving
#lasercutter
#sculpfun
#laserengraver
#sculpfuns9
#laserengravingmachine

Пікірлер: 129

@Georges-MILLION 2 жыл бұрын

Très bonne démonstration du réglage à mi épaisseur ! Merci du conseil . Very good demonstration of the mid-thickness adjustment! Thanks for the advice .

@heichp 2 жыл бұрын

Great channel just what i needed

@Dancopymus 2 жыл бұрын

Very good! That's why I subscribed to your channel because you always present good things about Laser Sculpfun. I also believe that the maker of Sculpfun will study and launch some more powerful laser that cuts faster and with fewer passes. Thanks for the video.

@SCULPFUNReal 2 жыл бұрын

yeah，it will soon

@user-kt5ll7wg9f 2 жыл бұрын

I wanted to ask what software program you use and with what settings you cut acrylic because it doesn't work for me. Thank you!

@99bfrater98 2 жыл бұрын

Very good explaining video! thanks for made!

@SCULPFUNReal 2 жыл бұрын

you are welcome👻

@DonHugo 2 жыл бұрын

Great video, I hope we can get a library build for lightburn soon. It will just help for the ones setting everything for the first time

@SCULPFUNReal 2 жыл бұрын

Do you mean: are sculpting parameters recommended on different materials? I am already preparing the materials, after my own experiments, I will shoot and give the recommended engraving parameters of plywood, wood, bamboo, leather, acrylic, clear acrylic, glass, stainless steel, ceramics, denim.

@Dancopymus 2 жыл бұрын

@@SCULPFUNReal We eagerly await!

@meaningfultravelagency7716 2 жыл бұрын

@@SCULPFUNReal I would like to have that! Thank u in advance.

@barrymiller3609 2 жыл бұрын

Thank you for sharing, really great guide

@SCULPFUNReal 2 жыл бұрын

Thank you too, thank you for complimenting me🤪

@antecedentescuts7260 5 ай бұрын

Hola. Compre mi Sculpfun S9 hace una semana y solo he estado haciendo pruebas con materiales, y para hoy, el laser ha perdido potencia, utilizo Lightrburn para utilizarlo. ¿Cuál es el problema?

@lewy7601 2 жыл бұрын

At 0:42, that's new to me, I have been struggle to cut through the 9 mm MDF, is there any recommendation to cut it through?

@janee7995 Жыл бұрын

Does it cut red/Green/yellow -transparent acrylic I do know it wont cut clear transparant acralyc

@benjaminpastrana9662 2 жыл бұрын

excellent professional voiceover💪🏼 can you do a video demo cutting real leather and engraving? I wonder how many cuts are needed and how bad is the burning marks! thanks

@SCULPFUNReal 2 жыл бұрын

soon coming

@kimneurenberg5013 Жыл бұрын

Exactly what I was needing. My husband can only plane our wood down to 10mm. Ive just been sick over not being able to cut it. 😊 Thank u. Oh BTW, u might want to turn the music down a little. it blares in relation to the voice. Or, it could just be my phone.

@SCULPFUNReal Жыл бұрын

It is the newest video for the cutting test, you might be interested: kzfaq.info/get/bejne/jcCUkpOD18mcoYE.html

@indera6th Жыл бұрын

Hi there, what parameters to cut through 9mm mdf board

@daniper6731 Жыл бұрын

Can I use this for denim fabric

@rickhuang4478 2 жыл бұрын

colud it be able to add ccd camera for calibration and preview??

@eliasbustamante4973 2 жыл бұрын

Hola necesito saber el precio de estas máquinas

@Lyudmila157 Жыл бұрын

please write the speed and power parameters for cutting and engraving in the program grbl.

@reedg5417 2 жыл бұрын

Remember probably have to run it 75 times to get it to really cut. Advise, keep looking for a better unit for cutting.

@jrmfr9542 Жыл бұрын

Can make video for set up into the laptope3 how to engraving and cutting

@aidamusic3092 Жыл бұрын

My friend wants to ask. My laser machine can't connect to the computer. How do I fix it.

@salvadorcarmona7834 Жыл бұрын

Tengo la Sculpfun S9 y a veces mejor uso el Router CNC, no tiene caso tanta quemadera y pasadas pudiendo hacerlo hasta con segueta manual o con el router. Para lo que me encanta del laser es para detalles que serían casi imposibles con otra manera.

@esiuol360girl19 2 жыл бұрын

Does anyone know if they will cut EVA foam?

@carlosrios4203 Жыл бұрын

Hi,im from colombia,can u tellme if it can cut foami grueso

@FranciscoGaviria Жыл бұрын

Hi, when i use lightburn with my s9 no engraving fine but with laser grbl all is ok, why??

@wsparry1066 Жыл бұрын

Hi could you tell me were to get the test image please

@anonymous737 6 ай бұрын

How thick is the acrylic sheet in the tutorial?

@antoniof8488 2 жыл бұрын

Awesome video! What were the parameter did you use in Lightburn at 8:15 mark in the video? Thank you!

@SCULPFUNReal 2 жыл бұрын

Duplicate several layers. Two cuts per layer, 12mm/s, 100% power. Terminate the cut when it is observed that the cut is complete.

@haigosounds Жыл бұрын

@@SCULPFUNReal why duplicate layers?

@condor13 2 жыл бұрын

Using the laser at 100% power? Wouldn't that kill the laser much more faster? I had a 5.5W from sainsmart, used it to cut and engrave 4mm MDF and it died after 5-6 months.

@clarenceandclarkcantos9612 2 ай бұрын

Can laser engraved sclupfun s9 in gold plated? What are the setting?

@user-ke5gf9re8w 4 ай бұрын

А что за вторая программа на видио, где группируются объекты и разбиваются по слоям?

@bacsijancsi 2 жыл бұрын

Hmmm can you control the Y axis of the laser head??... that is tha only option which could help cut thicker material, to raise and lower to focus distance from tha material if you take it out that you cut you will never able to put it back on the right spot. Some CO lasers can do that but only the most expensive ones...

@SCULPFUNReal 2 жыл бұрын

As you said, we're making the Z axis move in the easiest and cheapest way , which is expensive if it's electrically controlled

@user-vi3em9ep9g Жыл бұрын

Test clear acrylic??

@bringUrTowel Жыл бұрын

Is that wood balsa, pine, or something else?

@danielfranco880 2 жыл бұрын

Quero comprar um desse, porém aqui no Brasil, me recomenda algum vendedor?

@SCULPFUNReal 2 жыл бұрын

Maybe you can try Alibaba , szxiyang.en.alibaba.com/

@yustygraficos8991 Жыл бұрын

Greetings, is it possible to cut transparent 3mm acrylic on this machine? how do you recommend me to do it?

@SCULPFUNReal Жыл бұрын

No, clear acrylic can't be cut with a diode laser. The diode laser uses visible light and it will pass thru the acrylic.

@julianne24601 Жыл бұрын

What if you cover the acrylic with tape or something?

@mrsolution2775 Күн бұрын

Can cut mobile Protector Glass??

@KoenvanDommelen 2 жыл бұрын

When will the official air assist kit be availible? And will you also make a official limit switch set?

@SCULPFUNReal 2 жыл бұрын

Soon coming within a month

@KoenvanDommelen 2 жыл бұрын

@@SCULPFUNReal Great, we are realy in need of a good limit switch set!

@SCULPFUNReal 2 жыл бұрын

@@KoenvanDommelen will come together，But now many people are accustomed to not having limit switches. What are the benefits of you needing limit switches?

@KoenvanDommelen 2 жыл бұрын

@@SCULPFUNReal I can't make repeatable work with the S9, because it will never home exactly to the same position. Always 1 or 2mm off. So they are really needed.

@javierpaz3248 Жыл бұрын

Hi there! I’ve been trying to cut 3mm white acrylic and nothing happens, not even a scratch on the acrylic. Could you help me pls? What am I doing wrong cuz the speed I use es 100 and laser power is 100.

@SCULPFUNReal Жыл бұрын

Diode lasers cannot cut clear acrylic. You can try painting your white acrylic to black.

@javierpaz3248 Жыл бұрын

@@SCULPFUNReal thanks for the answer! but the acrylic isn’t clear, it is white. Maybe it count as clear, I’m a actually new to this world and I’m loving it because the sculpfun 9 is great!

@SCULPFUNReal Жыл бұрын

@@javierpaz3248 facebook.com/groups/sculpfunusers Join us! There is a lot of discussion about acrylic in the group.😄

@asuadvlog6145 2 жыл бұрын

Hello! Please I have 10W Lazer engraving machine but it’s not engraving on steel 💔 can I replace the head with your s9 Lazer head? Will it work for it since it’s another brand?

@asuadvlog6145 2 жыл бұрын

Can the s9 Lazer engrave on 316L steel?

@SCULPFUNReal 2 жыл бұрын

I bought the most common stainless steel pendant available for laser engraving, I don't know the exact model. The S9 is engraved directly on it, which can leave a slightly yellowed black marks. The surface of the stainless steel is painted black with a marker and then engraved, which can leave very black marks.

@SCULPFUNReal 2 жыл бұрын

As long as the interface of the laser head is the same, it can be replaced. The fixing plate we provide can be installed on most of the engraving machines on the market. For details, you can consult our customer service.

@SCULPFUNReal 2 жыл бұрын

szxiyang.en.alibaba.com/product/1600425290276-910070808/SCULPFUN_S9_90w_effect_laser_module_laser_head_High_Precision_diode_module_best_price_laser_engraving_module.html?spm=a2700.shop_index.167003.3.62235430A2MbzK

@vidademau Жыл бұрын

Any advise on how to calibrate if the circles I'm cutting are not circles 😐

@SCULPFUNReal Жыл бұрын

Check the belt

@kipatly 2 жыл бұрын

what parameters did you use, for the acrylic

@SCULPFUNReal 2 жыл бұрын

speed: 100mm/min, power: 100%

@Bluefire-7700 2 жыл бұрын

Can you add video with cutting 10mm transparent acrilyc pls

@SCULPFUNReal 2 жыл бұрын

Diode blue laser can't cut transparent things

@douglaskitchen9311 6 ай бұрын

So, to be clear I can cut thru 6mm birch plywood with no problem? The number of passes will be unknown at this point.

@sabrinaholgar4687 Жыл бұрын

Puede ayudarme por que mi láser no corta ni graba desde los primeros segundos de detiene.

@SCULPFUNReal Жыл бұрын

you can ask support@sculpfun3d.com, or join facebook Group for help, Official Facebook Group: facebook.com/groups/538557960530958

@alejandrovargas2909 Жыл бұрын

How much continuous working time does the machine support?

@SCULPFUNReal Жыл бұрын

The estimated usage time is 15,000 hours. However, continuous use for a long time is not recommended. Long-term continuous use, the temperature of the laser will increase, which will affect the laser output, but the impact on the use is not obvious; it is recommended to take a 15-minute break for every 4 hours of work.

@willferrell3184 5 ай бұрын

utilizar potencia al 100% le acorta la vida al laser? pues eso tengo entendido. que es mejor mas pasadas a menor potencia que menos pasadas a la mayor potencia

@himanshurush9305 2 жыл бұрын

The software that we use in this machine come free with this machine or we have to pay extra for the software I want to buy one please reply??

@kwekuarthur4104 Жыл бұрын

The two popular softwares are LightBurn (paid) and laserGRBL,(free)

@titormentos3385 2 жыл бұрын

Hello. First of all, thaks and congratulations for the video. I only have one question. which is the best distance from the protective cover to the material to cut? Because in the video I can not know the measure. Thank you so much

@marcyvanbeaulieu5109 Жыл бұрын

Est-il possible d’installer le S10 directement à la place du S9?

@SCULPFUNReal Жыл бұрын

What do you mean?

@indera6th 2 жыл бұрын

can it cut material like pvc pipe?

@123bugness 2 жыл бұрын

Although polyvinyl chloride (PVC) can in fact be cut with laser, the thermal process produces hydrochloric acid and toxic fumes.

@kattekolakartheek9072 Жыл бұрын

Can s9 cut transparent acrylic sheet?

@user-hl9pi6lu1n Жыл бұрын

No diode laser can

@Bayezid81 Жыл бұрын

could also cut stainless steel foil (0.05-0.2mm) with it

@nofaarranger Жыл бұрын

Waoow

@keirantimson7893 2 жыл бұрын

What's the max engraving speed of the machine?

@SCULPFUNReal 2 жыл бұрын

around 3000mm/min

@barrymiller3609 2 жыл бұрын

Please can you do another video with 3mm MDF and 8mm Plywood, would help alot

@SCULPFUNReal 2 жыл бұрын

MDF is really hard for any laser, I have tried, Why not make a work with a plank like a basswood block? They are stronger than MDF and easy to cut, cheaper

@bacsijancsi 2 жыл бұрын

@@SCULPFUNReal My 50W Co2 laser cuts 3mm MDF (or HDF) about as fast as plywood about 12-13mm/sec (720-780mm/sec) 1 pass. I also have a Atomstack A5 pro which was fun to try BUT if you are serious with lasercutting (and it is a great hobby) you need I mean NEED a CO2 laser. All these Sculpfun Atomstack lasers are toys, good fun but sloooow and unreliable...

@SCULPFUNReal 2 жыл бұрын

@@bacsijancsi From SCULPFUN S10. Things will change

@bacsijancsi 2 жыл бұрын

@@SCULPFUNReal Really??? HOW?????? Even stronger diode laser????

@lewy7601 2 жыл бұрын

Hi Barry, for 3 mm MDF, I tried before it will cut through by this setting → 300mm/min, 100% power, 4 or 5 passes BUT I observe that MDF is different from manufacturer to manufacturer, it has different types too.

@i_wood_like 2 жыл бұрын

What is the power of the laser?

@SCULPFUNReal 2 жыл бұрын

5.5W laser power

@i_wood_like 2 жыл бұрын

@@SCULPFUNReal thx

@trendingvideos8901 2 жыл бұрын

Can you deliver this in India ?

@SCULPFUNReal 2 жыл бұрын

Yes, you can search on alibaba.com

@vdsmade Жыл бұрын

👷👍

@isblaka Жыл бұрын

Tbh it's the first time i heard how Laser Grbl is pronounced , so far I said the name in my head as Laser Gerbil like the tiny rodent :D

@user-hl9pi6lu1n Жыл бұрын

A colleague told me, now I'm not sure it is right,🤣

@SarbarMultimedia 2 жыл бұрын

Any comments I make are intended as educational and not critical. The picture of how a lens works is perfect for telescopes, microscopes, cameras etc that deal with non-coherent (uniform intensity) IMAGES. The laser beam (any wavelength) has distinct properties of coherence and a Gaussian INTENSITY distribution that sets it apart from normal light and what you imagine a lens to do is no longer true. The thing that damages material is light INTENSITY. If you have a 10 watt laser then the more you can focus the beam into a small spot the faster you will damage the material. The problem is that the most intense (damaging) part of the beam is at the center .and when you pass a laser beam through a lens, those rays that are closest to the lens axis will not refract and will pass through the lens unaffected towards infinity. Thus the most damaging part of the beam is focusing way beyond the manufacturers stated focal point . As you move further from the lens axis, the intensity of the laser beam decreases but the refraction within the lens begins to gradually concentrate the destructive intensity into a narrower focal zone. However, that focal zone will still not be the OPTICAL focal point but an INTENSITY focal point one or more millimeters beyond the manufacturer's specification. Setting the focal point into the material is VERY inefficient because the first point of contact that the beam makes with the material is much larger than the smallest (most damaging) spot size and cutting will be slow. You are running this cut 40 times to cut through 10mm material. That means on average you are penetrating only 0.25 mm per cut material and at a snail's pace of 1,7mm/s Can I suggest that you set the focus to achieve the thinnest cut line at 1.7mm/s and use that as your most efficient cutting focus. Set your cut repetition to 4 and then before proceeding with another 4 cuts drop your focus by 1mm That means that the material at the bottom of the cut will always be exposed to the most damaging (smallest) part of the beam (the intensity focus). Please understand this is not something from my imagination . I have spent hundreds of hours experimenting with lenses and various size laser beams and have huge amounts of documented evidence. Lenses and laser beams have many unexpected interactions that are outside the. boundaries of normal lens theory.. Finally different wavelengths of "light"can have dramatically different damage efficiencieson the same material. For example a 60 watt CO2 laser (10,600 nm) will cut 10mm acrylic in a single pass at about 6mm/s . So with 10 watts at 450nm let's assume a 17mm long cut. Thus at 1.7mm/s it will take 10 seconds for each pass. x 40 passes = 400 seconds to cut 10mm acrylic. With 10,600 wavelength light , it takes less than 3 seconds. OK so we are using 6 times as much power so divide 400 by six for an approximate equivalence and a 60 watt 450nm laser would take 67 seconds that is still 20 times less efficient material damage just because of the different wavelength. Best wishes to all readers and you will find so much out there to learn about this technology. Laser diodes are fun and cheap and give you a taste for what is further up the ladder when and if you have the time and money

@Monkey_Snot Жыл бұрын

Why does it cut in one direction and not both? Wouldn't your number of passes be cut in half if it cut both directions.

@CrisAnderson27 2 жыл бұрын

My Neje 2s max 40w/10w cut 12mm oak yesterday in 2 passes lol.

@TalkingGIJoe 2 жыл бұрын

You have 10watt versus 5.5watt

@CrisAnderson27 2 жыл бұрын

@TalkingGIJoe 40w input too. The S9 bills itself against the Neje all the time, also claiming "60w" power. I was just making the point for viewers that there was no comparison.

@Graeme758 2 жыл бұрын

Wow, 18 passes? But the Sculpfun advert on aliexpress says this has similar power to a 90w co2 laser. Load of bollocks. Wont be wasting money on this.

@SCULPFUNReal 2 жыл бұрын

Sorry he can't reach that cutting speed, but it's comparable in cutting thickness, it's much cheaper after all

@stixstudios3380 2 жыл бұрын

So, a 'slight' exaggeration I guess. 🤣

@SPS625 2 жыл бұрын

With no air assist and charing!

@SCULPFUNReal 2 жыл бұрын

Coming soon in SCULPFUN S10

@SPS625 2 жыл бұрын

@@SCULPFUNReal Do you have any estimate when It will be available?

@dusanbernath1891 6 ай бұрын

Yep, main S9 unit definitely cant cut through 15mm or less wood, it provides better performance comparing Chineese ones but im quite disappointed due to not possiblity to cut through at least 10mm wood .. I tried to setup same way so 1000mm/m and 85% power also tried to focus little bit less how the calibration cylinder height is - as in a video ... using 85% it starts to get really burned edges and after approx. 15 layers or maybe less stops cutting. So do not recommend it for cutting ... quite much money wasted ... :/

@dusanbernath1891 6 ай бұрын

And just from communication Dear Customer, Thanks for reaching Sculpfun. Sorry for the trouble. We have tested to cut the Cork board or cardboard ,but not the hard wood. The material is not the same . S9 can't cut hard wood. Best regards freya

@dusanbernath1891 6 ай бұрын

So its kind of scam that cost 200 it seems so.

@ProjectDoomsday Жыл бұрын

Good helpfull video but NEVER EVER AGAIN edit it that way. No music or at least on the same level throu entire video.

@tonyttiger5554 Жыл бұрын

Bs no it won't I have one

@SOS_MOVIE Жыл бұрын

Why you put this bad voices in the background.. it is very very very bad..

@SOS_MOVIE Жыл бұрын

You harm our ears..

@336mrk Жыл бұрын

Sculpfun has a rubbish and dishonest shipping service I ordered mine on the 5th December thinking I would get my machine shipped by DHL 16th December still waiting!!! AVOID AT ALL COSTS 👎🏼

@danielsantos8625 5 ай бұрын

Mine got to me within 4 days works great

@user-ov8qr6du4o Жыл бұрын

El link de compra de la misma máquina de grabado láser en el video: articulo.mercadolibre.com.mx/MLM-1589181095-maquina-de-grabado-laser-sculpfun-s9-rayo-ultra-delgado-_JM