SCX24 Upgrades! Performance & Looks - Axial Brass & Tinker Time Cage!

Рет қаралды 6,064

Күн бұрын

Some Axial SCX24 brass upgrades go on the new Power Wagon along with an AWESOME Tinker Time RC Rear Cage and some shock mounting modifications!
Axial Brass Upgrades for the SCX24 and AX24: bit.ly/49hbgPz
Tinker Time Facebook: / tinkerer82
Furitek Starter Brushless System: furitek.com/collections/combo...
Pick up your new SCX24 Power Wagon here: bit.ly/3slrzLu
RCMCCA Website: www.rcmcca.org
RCMCCA Facebook: / rcmcca
RCMCCA FB Group: / rcmcca
#Axial #axialadventures #scx ‪@axialvideos‬ #TinkerTime #scx24 #minirc #rcrockbuggy #rcrockbouncer #rcrockcrawler #rccrawler #miniRC #rcrockcrawler #rockracer #rockbouncer #gofast #rcbuild #scaleaccessories #fcx24 #trx4m #FMS #furitek #furitekusa
Be sure to join this awesome Mini RC Discord Chat: / discord
Purchasing from these links may or may not help support the channel, just depends on the link! (But they are here for your convenience.)
We now have shirts and stuff! Find it all here: my-store-4267224.creator-spri...
0:00 Intro
2:09 Initial Weight Distribution
3:44 Axial Brass Knuckles
10:26 Removing Old Knuckles
12:20 Weighing Knuckles
13:46 Installing Knuckles
17:02 Brass Axial Diff Cover
23:40 COG Discussion
24:55 Axial Brass Hex Hubs
27:46 Wheel & Knuckle Weight Issue
31:39 Back to the Hex Hubs…
34:15 60/40 Weigh In
37:05 Tinker Time Cage
47:07 Some Weigh In & Discussion
52:33 Axial Brass Rear Link Truss
56:03 These Hex Hubs are NOT for us.
59:46 Final Weigh In & Thoughts
1:00:49 Moving Knuckle Weights Down
1:02:22 Relocating Shocks Lower
1:11:15 All Done!
1:14:02 Run It!
1:16:19 Final Thoughts
RC Gear:
JoeRopes Lanyard and RigRopes: www.joeropes.com/shop?TheShop...
Flysky Noble NB4 PRO: amzn.to/3ntJooM
Flysky Noble NB4: amzn.to/3ZsA4Pt
Ovonic X1 Charger: amzn.to/42TYF2j
Ovonic Mate1 Lipo Battery Charger: amzn.to/3JYPsgy
Bench Gear:
AMIR 28 IN 1 Cordless Mini Power Precision Electric Screwdriver Set: amzn.to/3VIAD6i
The Sickest FIELD BENCH EVER - Turtle Laboratories Portable Hobby Workstation Work Bench: turtlelaboratories.com/produc...
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Servo plug splitter: amzn.to/3Z7678j
Recording Gear:
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ
Camera Stand 4: amzn.to/36xhSib
70 LED Video Light with Adjustable Tripod Stand / Color Filters, Obeamiu 5600K USB Studio Lighting: amzn.to/3lK56Rq

Пікірлер: 54

@andrewrichey7374 4 ай бұрын

Looks pretty stinking freaking sweet with the cage in the back I like it, Yep we’re back watching 5:37 PM Thursday couldn’t finish watching the other day

@TheShopMiniRC 4 ай бұрын

Thanks for finishing

@justcrawling1916 4 ай бұрын

Very informative Ken

@TheShopMiniRC 4 ай бұрын

Glad it was helpful!

@MrsRabbit8 4 ай бұрын

IMO lowering the position of the lower shock mount in this way doesn't offer as good of geometry. A shock tower is a better option. I truly enjoy your videos, you're reminding me of things i forgot, and also teaching me new tricks. Excellent! Shared your channel with a friend. He's just getting into RC, and the detail you get into is top level. Maybe get better lighting for those tough spots, but overall you rock man!

@TheShopMiniRC 4 ай бұрын

Thanks a ton, and yes, there are many ways to change the shock mounting. I was trying to show without needing to buy new mounts. I also usually mention that leaning the shocks will give more axle travel/articulation but also makes your shocks less effective. I do need to figure out some lighting that will help from that angle. Thanks a ton for the share.

@andrewrichey7374 4 ай бұрын

Can’t wait to see it in action

@TheShopMiniRC 4 ай бұрын

;)

@rcmadnessminitruckclub Ай бұрын

I like the half cage. Just wish they made it a single cab. Then it would look killer.

@TheShopMiniRC Ай бұрын

Yeah, I get that, but I really like the 4 door

@alexarellano2541 4 ай бұрын

Great job 👏🏼 love the idea of the shock relocation gonna have to try it . These trucks sit to high when you upgrade. Thanks again

@TheShopMiniRC 4 ай бұрын

You bet! Thanks for watching.

@andrewrichey7374 4 ай бұрын

I really like it looks awesome, I have four each one different design of tinker tines cages plus the flatbed

@andrewrichey7374 4 ай бұрын

That was nice control on the down send

@TheShopMiniRC 4 ай бұрын

Indeed! driver did good.

@andrewrichey7374 4 ай бұрын

That looks pretty stinking freaking sweet dude, love it I have a couple of those tinker time beds cages whatever. Love the Tip and the shocks I see what you’re talking about well until next time peace and chicken grease 😁👋👋😎

@andrewrichey7374 4 ай бұрын

Yep will catch you later

@andrewrichey7374 5 ай бұрын

Awesome ken Just got my orange four-door power wagon love it, watching now 7:36 PM Wednesday

@TheShopMiniRC 5 ай бұрын

Huge thanks good sir!!! Any plans for your power wagon?

@KyleKick909 5 ай бұрын

I'm a newb to RC crawlers and it's way more difficult to mod these things then I was expecting. Especially those Phillips screws. Even something simple like reinstalling the front bumper to my FCX18 and losing the screw in the body over and over again and all the shaking in the world won't dislodge the screw from its hiding spot. I have bunch of parts arriving soon and I'm feeling discouraged to install them.

@TheShopMiniRC 5 ай бұрын

The fcx18 should be mostly 1.5mm hex heads. But yes, these are small and do require some patience. It’s very rewarding when done though.

@nunocarneiro464 5 ай бұрын

You need to do some yoga and meditation before working on these mate 😂 Don't worry you'll soon get used to it Just a tip , buy good tools or you'll be stripping hardware left and right

@gibsonlife573 4 ай бұрын

get easier as the further you get and it will become way more fun also

@KyleKick909 4 ай бұрын

Tonight I installed drive shafts, steering links, skid plates, and cute little red tow hooks. The front bumper screws ended up being the only real problem. That and the stock wheel nuts are a bit Too $hort and the beadlock bolts on the new brass wheels are in the way. I ordered longer nuts. I also just got some tools from Injora.

@TheShopMiniRC 4 ай бұрын

@@KyleKick909 niceeee I bet it looks awesome!!

@andrewrichey7374 4 ай бұрын

Yeah I was going to tell you Ken , But I didn’t wanna shorten the video 😁😁👍👍😎

@DoubleADay 5 ай бұрын

Looks good but I'm holding out for a better fitting bed. I mounted up the new Black Labels on my Power Wagon, choice

@TheShopMiniRC 5 ай бұрын

We need to get some black labels. Just soo many tires and they are like ice cream… flavor of the month.

@andrewrichey7374 4 ай бұрын

Yeah well only the first scratch hurts 😁👍👍😎

@TheShopMiniRC 4 ай бұрын

Facts.

@andrewrichey7374 4 ай бұрын

That there was upside down 😁😁

@gibsonlife573 4 ай бұрын

So with the worm gear have you ever experienced the feeling of push a truck and it roll with overdrive in it

@TheShopMiniRC 4 ай бұрын

Like when side hilling?

@OGKDOG104 5 ай бұрын

I hate those axel hubs!! The pins are too small and the little driver they give is sooo tiny. Can't do it. Lol Winning video, thanks!

@TheShopMiniRC 5 ай бұрын

They would be fine if they just used a larger hex!!!

@frozenphyro2302 5 ай бұрын

They should have used the .050in hex hardware instead of that tiny trash. Those current bolts strip way too easy.

@TheShopMiniRC 5 ай бұрын

@@frozenphyro2302 100%

@DadsRCGaragePNW 5 ай бұрын

So the stock wheels suck. The tires are great! The stamped steel wheels will work and clear the hangers. Only catch is the tsl tires are .93 not 1.0 so takes a lil doing to use the tires. You can also get the barrels to extended it and tap a hole for the screw pin if your really wanted

@TheShopMiniRC 5 ай бұрын

Great tips!

@AnyAssumptionBanter 4 ай бұрын

Loctite on carbon fiber? How about plumbers tape on some screwsm

@TheShopMiniRC 4 ай бұрын

I didn’t loctite anything to carbon fiber. lol. Only metal to metal. I don’t think there is any carbon fiber anywhere on this truck.

@AnyAssumptionBanter 4 ай бұрын

@@TheShopMiniRC sorry about that... i actually meant if loctite blue could be used on carbon fiber.

@TheShopMiniRC 4 ай бұрын

@@AnyAssumptionBanter ahh. Well honestly, I haven’t had any issues getting loctite on the carbon, but I’ve never used it with the intent to loctite it to the carbon. Usually to loctite to a nut on the other side.

@nunocarneiro464 5 ай бұрын

Good thing you did this with all axial parts , now i know to never buy them, stupid engineering, we can buy every part from everyone and everything works, they can't even make it work with their own wheels, those hex are good in the 1/10 but in the 1/24 what's the point ? Anyway that cage looks great, made the rig look a lot better

@TheShopMiniRC 4 ай бұрын

to be fair.. just about everybody changes out the wheels to aftermarket wheels.. and while these knuckle weights are labeled for the scx24 and ax24, i think they really made em for the AX

@cardboardcrawlersrc8805 4 ай бұрын

The only power wagon I’ve actually liked the looks of so far. In my opinion axial really misses the mark with that rig.

@TheShopMiniRC 4 ай бұрын

thanks my dude! We are loving this one!

@aladinsane5771 5 ай бұрын

if 0.9 feels like stripping, us a T5 - torex, it will work...

@aladinsane5771 5 ай бұрын

oh, 0.8 might be a T4 or even T3 , but with all those small hexes i rather use a Torex on them, it's just a better fit...

@TheShopMiniRC 5 ай бұрын

That’s a good tip. Would still just prefer they use a 1.3mm hex.

@aladinsane5771 4 ай бұрын

@@TheShopMiniRC to be honest, any hex under 2 mm u can use a torex for, most shops just don't have size 1 to 7 in stock, T5 to T8 can do most hex-screws on all my crawlers...

@TheShopMiniRC 4 ай бұрын

@@aladinsane5771 yeah, I’ve done it before. Was just frustrated with these.