Scx24 Winch Test! // Quick run test and how to install winch for mini crawlers!//

No video

Scx24 Winch Test! // Quick run test and how to install winch for mini crawlers!//

Рет қаралды 20,007

Күн бұрын

Quick install video for how to mod a cheap and simple winch for scx24's and other min crawler builds
Link to retractable “mini winch”
N1U 10 Pack Badge Reels Retractable with Swivel Alligator Clip - Retractable Badge Clips for Work - Retractable Badge Holders with Clip for Nurses - Durable Retractable ID Badge Clips in Bulk - N1U www.amazon.com...

Пікірлер: 126

@VetteWay2Fast 8 ай бұрын

Nice, those little retractable things have a ton of applications in RC. I used to attach them to the end of my dining room table and on the bottom of the eflite vapor for an "aircraft carrier launch catapult" lol. Was actually pretty fun flying around the room and having a string across the table and hook on the rear to catch the landing vapor as well.

@UpperLeftRC 8 ай бұрын

That’s an awesome idea! 😄👍🏻

@jeffreypursley1914 Жыл бұрын

Such a great idea and inexpensive to implement. Thanks for sharing.

@UpperLeftRC Жыл бұрын

Thanks for watching!

@chrisoverbey7232 2 жыл бұрын

I did the exact same winch but I used a necklace clasp for the hook. Hooks perfect on the d rings. It definitely works and worth doing.

@law7116 2 жыл бұрын

That's such a sweet hack I like that it doesn't pick the truck up it just helps a bit from flipping.

@Mikey1962 2 жыл бұрын

Fantastic idea and showing how to do it is just icing on the cake. Thanks.

@UpperLeftRC 2 жыл бұрын

Glad you enjoyed it 😄👍🏻

@jdsrcs8061 2 жыл бұрын

If he doesn't get back to you bro, I will give her a loving home!!!!🤘🤘🤘 What a cool place to mount it. I might have to order some.

@bmlkohs 2 жыл бұрын

I would say give the person another week and if there is still no response draw again. Also, I have to do this on mine! My wife is a nurse and has a ton of them sitting around the house.

@V8chump 2 жыл бұрын

Wow I’ve got these little retractable lanyards comin out my ears, what a good use for em! 🤣

@offgridrc245 2 жыл бұрын

That’s an awesome idea, An automatic winch! Thanks for the video 🤘

@law7116 2 жыл бұрын

Sweet I will try this and form my hook with a paper clip. Thanks

@AnthonyGonzalez-lw1ek 2 жыл бұрын

Hooray congrats 🎊🎉🍾

@luisgranados2545 2 жыл бұрын

Thanks for the hack just did this last night with the C10 you literally just stick it with a double ended adhesive under the hood make a small hole with the drill on the hood and boom took like 30 secs will try with my other axials

@UpperLeftRC 2 жыл бұрын

Glad it worked for you 😄👍🏻

@joekirk114 2 жыл бұрын

You did what for the c10 ?

@carolinakayakadventures270 2 жыл бұрын

Thanks for sharing this!!! I’ve seen other people do this but was a little skeptical as to how strong the spring was. I’ve been trying so hard to make a servo winch but they always wind up too heavy. Definitely gonna try this!!! Great video!!!

@UpperLeftRC 2 жыл бұрын

Yeah I was skeptical as well but they work so great I’m upset I didn’t do it sooner lol 👍🏻

@brandonreid4511 2 жыл бұрын

I literally use a heavy duty one for the rear winch on my 1/10 competition truck 👍 has saved me and alot of others behind me many times 💪

@brandonreid4511 2 жыл бұрын

You can actually get chain ones if you can find them! I had one when younger but unfortunately have lost it before I got into RC 👎 hahah

@DFDuck55 2 жыл бұрын

Nice! I had seen these retractable ID things used on 10th scale trucks, and it works well for them too. Gonna have to pick one up for my Deadbolt.

@chaddavis513 2 жыл бұрын

I was looking for a better place to install mine. I had it above my servo and it was not allowing my suspension to work its best so im going to try your advice in my C10. awesome video man!

@skribzonwhalz8007 2 жыл бұрын

I ran a slightly different setup on my C10, but this is definitely a mod worth adding to a build 🙌🏼💯 so much fun and surprisingly useful.

@joekirk114 2 жыл бұрын

What did you do for the c10 differently ?

@Ruckus_Crawler 2 жыл бұрын

That's awesome man, such a good idea!. Thanks for the video

@UpperLeftRC 2 жыл бұрын

Glad you enjoyed it!

@johnnyfearlesszrx 2 жыл бұрын

Great mod and video. Definitely the next mod on my SCX24 Jeep. Many thanks.

@3DRC 2 жыл бұрын

These work killer been using one for a while nice vid🤙

@DialupGaming 2 жыл бұрын

Congratulations!

@chadedwards5908 2 жыл бұрын

Awesome brother.

@jasonslezak150 2 жыл бұрын

Great video and very helpful took my winch setup from a 9.5 to a 12

@pedraza_rc1812 2 жыл бұрын

Yessir I use the same thing but I have it on the rear to pull people out 😂

@UpperLeftRC 2 жыл бұрын

Nice! Either end works lol

@markelms 2 жыл бұрын

Great tutorial.

@UpperLeftRC 2 жыл бұрын

Thanks 😄

@lylekehrer6159 2 жыл бұрын

I've seen this too, SoFlo RC he used cut out plastic for the hook. Never even thought about fish hooks. Like the idea! Maybe use pliers to smash the eye to narrow it, might work.

@Sean-nb4bn 2 жыл бұрын

Love it. Quick easy install, easy to use and it’s effective. Such a great cheap mod

@jkaimedia Жыл бұрын

Radical , I will recreate. thank you

@jdads100 2 жыл бұрын

Thank you for inspiring me to do this with the panda hobby tetra

@UpperLeftRC 2 жыл бұрын

Glad to help 👍🏻

@jdads100 2 жыл бұрын

@@UpperLeftRC this helped the tetra perform pretty well

@geraldwaid7314 2 жыл бұрын

Been thinking about getting one of those. Rcs an skoal apple. Hell yea

@alamanako 2 жыл бұрын

Sweet. Great video!

@Daniynad 2 жыл бұрын

Works as long as truck is not too heavy.

@stuckintrees4796 2 жыл бұрын

Awesome 👊thanks brother ✌️

@EZEfallout 2 жыл бұрын

Haha that's really clever 😄. Nice one 👍

@UpperLeftRC 2 жыл бұрын

Thanks 😄👍🏻

@Pswans509 2 жыл бұрын

Missed this that blows

@UpperLeftRC 2 жыл бұрын

All good buddy, check your comment on the live giveaway video

@arod19841984 2 жыл бұрын

Nice bro!! I have mine just clipped on the front. Gonna try your method! Looks clean!

@BraydenWolframe 2 жыл бұрын

Lol, this is the exact same thing I have my swipe card on for work. If it was just a bit bigger you could mount it on the back to look like a spare tire and route the cord through the frame. Maybe I'll open er up and 3d print a fake spare tire to hold it in

@bcochener 2 жыл бұрын

Nice little addition there!

@JaysensRCs 2 жыл бұрын

Nice!! That is sweet. Definitely going to get some. Great video. 😎

@GNCRC 2 жыл бұрын

Nice mod! Great video!

@andrewrichey7374 2 жыл бұрын

Wow that’s awesome, I’ll have to check went out appreciate you sharing

@jdads100 2 жыл бұрын

You should do this on each and every one of your trucks and do a tutorial for each truck's winch

@UpperLeftRC 2 жыл бұрын

I might just do that

@jdads100 2 жыл бұрын

@@UpperLeftRC If you do that I would like to be the first or one of the first to know

@mrbutchee1 2 жыл бұрын

Heck yeah, could probably use a really small servo too and double side tape it to the bottom of the servo tray too.

@ricardogarcia3599 Жыл бұрын

Guys you can get this off of Amazon granted im an employee now but definitely worth the free winch.

@chriscasterbassmaster Жыл бұрын

Great content. 👍

@UpperLeftRC Жыл бұрын

Thank you! 👍

@rossrc 2 жыл бұрын

well this is going to be a must for me! Thank you!

@UpperLeftRC 2 жыл бұрын

Happy to help, I’m sure you’ll enjoy the mod, it’s awesome! 🤘🏼

@liquidDiecast 2 жыл бұрын

You got a subscription for this one

@UpperLeftRC 2 жыл бұрын

Thanks! I’m glad you like the content 😄👍🏻

@piperazteca 2 жыл бұрын

That’s a really good idea thanks

@UpperLeftRC 2 жыл бұрын

Glad you like it :)

@matthewmahlik9113 2 жыл бұрын

Been looking for a hack like this, thank you brother

@UpperLeftRC 2 жыл бұрын

Anytime 😄👍🏻

@Nejrnrjrhrbrj 2 жыл бұрын

that is awesome keep the good work up

@doughboy0379 2 жыл бұрын

I saw a hack to add to this, a faux scale winch mounted on the front with a hole drilled through them and the line going through it

@SeamusMacMattain 2 жыл бұрын

Thanks for the info and tutorial! my Baby Avenger needs this... it is so top heavy with the diecast body and has an 18mm shorter than deadbolt stock wheelbase, it is a %^&*$&^%$ of a learning curve.... I just got some rocks cleaned and inside the house so I can finally start doing some filming again....

@UpperLeftRC 2 жыл бұрын

Nice! Can’t wait to see the content 🤘🏼😄

@zz-tama 2 жыл бұрын

Great winch work👍

@ka4172 2 жыл бұрын

This winches are work awesome my Wrangler climb and winch some incredibel obstacles ha ha.

@UpperLeftRC 2 жыл бұрын

Yeah these little winches are awesome 🤘🏼😄

@CCxRC 2 жыл бұрын

Great video! Nice hack! Made me want to try it.

@UpperLeftRC 2 жыл бұрын

Awesome! I hope it helps and thanks for the comment, I really enjoy your content and it’s cool to see you liked some of mine 🤘🏼😄

@abrahammagana2286 2 жыл бұрын

That is an awesome idea!

@rcplaytime 2 жыл бұрын

brilliant idea😀👌👍👍

@DerekLed 2 жыл бұрын

I dunno why I haven't added one yet 🤷‍♂️

@jhudaiedwin4119 2 жыл бұрын

i must try this

@projectrc4610 2 жыл бұрын

I did a video on using theses as a winch a few years ago they work good but the real micro winches are still better but they do work

@rekik66 2 жыл бұрын

🙌🙌🙌

@TR850 Жыл бұрын

Pretty amazing! Super simple but brilliant idea. Can you please comment on which bumper you are using on the deadbolt that is already designed tho route the string through it?

@UpperLeftRC Жыл бұрын

Yes it’s the hot racing bumper, I don’t have a part number for it anymore but you can find them on Amazon or also at local hobby shops probably, but for sure Amazon has them, they should be easy to find and I’ve seen other off brands that make small route through holes cut in them 😎👍🏻

@marcog7652 2 жыл бұрын

THIS IS AWESOME

@DoubleADay 2 жыл бұрын

I may try this after I get my new mofo rc bumper

@mjspeedrunrc6220 2 жыл бұрын

What wheels and tires. I'm digging the deep dish rims!

@MittenStateRC 2 жыл бұрын

🤘

@rcbuilder111 2 жыл бұрын

I used to have the same one but and then I Updated it to emax servo

@mrxkiilla2294 2 жыл бұрын

Genius

@UpperLeftRC 2 жыл бұрын

Thanks, I can’t take the credit for the idea but I tried to simplify it 😄👍🏻

@static_blocks5202 2 жыл бұрын

idk but i feel like this defeats the purpose of casual crawling. i would never use this but if you guys find enjoyment in it go for it!

@noedelacruz5910 2 жыл бұрын

Would you mind sharing the link for the wheels and tires you have in the Deadbolt please, thanks.

@UpperLeftRC 2 жыл бұрын

I got both the wheels and tires on eBay, here are two listing I found for both but look around for better prices on eBay or Amazon before you buy them just incase there are better deals 👍🏻 Wheels: www.ebay.com/itm/115043475813?epid=1678785423&hash=item1ac9202165:g:iW4AAOSwU0JhZhSz Tires: www.ebay.com/itm/402618393170?hash=item5dbded2252:g:jfMAAOSwTzpf4RZY

@noedelacruz5910 2 жыл бұрын

Awesome, thanks for sharing.

@andrejazz4235 2 жыл бұрын

it's better to use the n20 motor, it's smoother

@junelopez9520 Жыл бұрын

I'm a bit behind but where did you get your front bumper?

@UpperLeftRC Жыл бұрын

No problem, the bumper is “Hot Racing” brand and you can find it in Amazon 👍🏻

@batjr.jr.5272 2 жыл бұрын

Why not pinch the eyelit of the hook to make it retract?

@UpperLeftRC 2 жыл бұрын

I’ll give it a shot 👍🏻

@batjr.jr.5272 2 жыл бұрын

Cool let me know! G. L.

@batjr.jr.5272 2 жыл бұрын

@@UpperLeftRC ❤

@David-qc1dk 2 жыл бұрын

Can u link me to the lanyards that u used thanks

@philipkrogh3169 2 жыл бұрын

What parts from the scx24 also fit the element Enduro 24? I just got one and looking for good upgrades

@UpperLeftRC 2 жыл бұрын

I’m not sure, I know wheels and tires for scx24’s will fit the enduro, beyond that I don’t think there are many other parts that will crossover

@philipkrogh3169 2 жыл бұрын

@@UpperLeftRC ok thank you. My Enduro has a lean in the front to the right and I was thinking about trying some scx24 shocks

@brandonfloyd6321 2 жыл бұрын

Could a ring be glued on top of the servo an the string run through it to keep the double barrel shocks from over extending and letting the vehicle hump up and not climb like you made a video about? I forgot about them doing that and I bought a set and gonna have to make a limit strap.

@mariusskaiaa8900 2 жыл бұрын

Phkkhhkk