Scx6 My Lousy Opinion

  Рет қаралды 7,314

Brokennib RC

Brokennib RC

Күн бұрын

My thoughts/experience with the Axial Scx6

Пікірлер: 32
@Antoniosp10
@Antoniosp10 Жыл бұрын
In my country the SCX6 is “Pay expensive and play alone”… But it is cool.
@slobaru7094
@slobaru7094 8 ай бұрын
mine goes to parties lol. kids of all ages love riding it but hate when i tell them they cant drive it.
@shuster1921
@shuster1921 3 ай бұрын
I drive mine to work, I get there late a lot but the insurance is really cheap,,,
@JasonGunn418
@JasonGunn418 24 күн бұрын
I crawled mine in dirt and mud. Never had any issues with steering or going up and over dirt hills. I just oversized all the accessories parts for the Scx3, and 3D printed them for my scx6. Even the front bumper with the two loop.
@slobaru7094
@slobaru7094 8 ай бұрын
really like your rundown on the scx6, wish this was out when i was looking at getting one 😂. now im all in over $2,600 in 1 rc truck (and not done) lol. they are amazing rcs, just worth more around $799.99 rtr for the parts it comes with, not $1099.99.
@CRAZYBUILD349
@CRAZYBUILD349 7 ай бұрын
just picked the honcho for $829 amain hobbies, it saved enuff to get a servo,!! Shift 1/5 servo,only one avabile
@brokennibrc1045
@brokennibrc1045 7 ай бұрын
Well, remember mine was a preorder, so I got hosed on the price, really. 😀 Nowadays you can get them a bit cheaper, and even a better deal used
@PatrickFugate-qk7ev
@PatrickFugate-qk7ev 5 ай бұрын
I bought mine a couple of weeks b4 Christmas..$825.00…I always wait for this stuff to go on sale..Just have to b patient..
@rowndo
@rowndo 7 ай бұрын
Just bought a honcho SCX6 and wanted to see what other people were doing with it. Great video sir. You did really interesting stuff to it. And yeah the servo gives a lot to desire. But one thing I would like to see is how you wired your steering servo to the additional battery separate from the esc/motor battery. you can make a short video and I would watch it. You gained a new subscriber. Cheers
@brokennibrc1045
@brokennibrc1045 7 ай бұрын
Thanks 👍 The wiring is rather simple, I just extended the power leads on the servo itself, but yeah, I'll try to put up a quick little video real soon.
@robpracht9303
@robpracht9303 7 ай бұрын
It is word the cash.. Some diy and a better servo and you are good.. And more upgrades always make it better..
@curtkelsey2136
@curtkelsey2136 4 ай бұрын
I really like your videos and the real-world view on the cars.
@kolasaRC
@kolasaRC Ай бұрын
❤❤❤❤❤Thanks for sharing, keep em coming, From Alberta Canada.
@bikeracr
@bikeracr 3 ай бұрын
very informative vid enjoyed it thank you.
@ShadeTree_RC
@ShadeTree_RC Жыл бұрын
nice rig man....200th subscriber btw 😁😁
@brokennibrc1045
@brokennibrc1045 Жыл бұрын
Sweet! Thanks 🙂
@sheldons4796
@sheldons4796 3 ай бұрын
Stumbled upon this channel and for the first video ive seen, Im hooked. Definitely sub worthy. Ive been looking at the scx6 for some time now and been hesitant because of the price. My lhs both the jeep and honcho are 1499.00 cdn rtr. Ive got 1/10, 1/18 and 1/24 crawlers but the large scale seems to interest me more. I really enjoyed the real life review and the explanations are awesome. Keep up the great vids.
@volvospede
@volvospede Жыл бұрын
That ”pitman arm” is actually panhard rod.
@rcarty419
@rcarty419 Ай бұрын
They are amazing and super fun!! Extremely capable. But mine sits……I go to my 1/10 1/18 I use few times a week….scx6 few times a year lol. Partially they are expensive to upgrade. Someday I’ll lower it and put it on some lcg chasis!
@brokennibrc1045
@brokennibrc1045 Ай бұрын
Been driving mine quite a lot this spring, great for lakeside hikes with a lot of sand, and perfect for snow runs! It comes with me to every group run, even with my 10th scale stuff
@CowboyRc743
@CowboyRc743 2 ай бұрын
I have 3 1:10 scale trucks, 9 trucks total. I just got back into rc after becoming unable to work again. I want one of these, just worried that I won't drive anything else.
@boduke9428
@boduke9428 10 ай бұрын
My 8s Outcast EXB is my only car that makes my SCX-6 feel easy to lug around.
@slobaru7094
@slobaru7094 8 ай бұрын
i use small tiedown straps around the rear axle and wear it like a backpack when i do break it.
@vb9300
@vb9300 6 ай бұрын
Im glad you have faith in Vitavon, they ripped me off 208.00.
@keldonator
@keldonator 2 ай бұрын
How so?
@vb9300
@vb9300 2 ай бұрын
@@keldonator bought a set of axle housings. The upper link mount broke 5 mins of use. Vitavon doesnt sell the bolt on replacement part and their customer service kept flagging my emails as spam. Never got the situation resolved so i ended up eating the 200.
@slobaru7094
@slobaru7094 8 ай бұрын
spektrum is not a good brand, but my scx6 is still rockin factory esc/motor after 6 months of missouri river running. the power button failed so i had to cut the power and ground for the switch out of the wiring loom and wire a waterproof switch in, but left the other comminication wires on to still have tuning functions with the factory power button. factory spektrum servo was a total joke. NSDRS-2500 V2 went in in less than a month. factory servo works great in my 1/5 scale boat though. shocks are really nice, dont leak down. panhard bar mounts need replaced asap with aluminum, same with the bar thanks to axials great rod end design there.
@DanBrando
@DanBrando 8 ай бұрын
Nice vid
@LRCR
@LRCR 7 ай бұрын
Thats Quite the review on the JLU SCX6 Jeep... So anyways ive just ordered the Trail Honcho Tan on sale HH and have noted that everyone is downing the Servo but I don't think any of them tried to Install a 6 amp/10 amp burst BEC to the Spectrum rated 6-8.4 volts for more power... Thats also been ordered. I also have seen enough Video's to understand the Foam inserts are really super soft for the weight of the stock configuration so I've got a set of Injora Dual Stage foam's coming too. Im learning as much as possible before I tear the truck apart for repairs or go $500+ on simple upgrades wheels, tires, servo's and chassis parts, however I'm almost certain that panhard mount can be braced with aome creative modeling, which Joe at Exocaged RC has done the double sheer lower brace but I'm thinking i can also do it for the top?? I'm really excited to get started on the SCX6 Trail Honcho mods and will try to do a video on what I've done and plan on doing as i continue to enjoy this Mammoth RC Machine... ✌🤠👍 HFLPRCing =Having Fun Laughing Playing and RCing 👍😎👍 AOAH =Association of Addicted Hobbiest 🙏 SSPH =Stay Safe and Play Healthy My Friend 🎊💯🎊
@brokennibrc1045
@brokennibrc1045 7 ай бұрын
Yes, you can DIY a lot of these mods yourself, but you can find a cheap shock/panhard mounts on Amazon, and can save you a little hassle in my opinion. Main thing is to have fun doing it!
@LRCR
@LRCR 7 ай бұрын
@@brokennibrc1045 Yes Sir, I've been looking at the aluminum shock tower's and found some budget friendly one's 👍😎👍 AOAH 🏁💯🏁
DX6 Rugged My Lousy Opinion
18:34
Brokennib RC
Рет қаралды 1,7 М.
Axial SCX6 Dach entfernen und erste Tuning Maßnahmen
18:11
RC Freunde Bayerwald
Рет қаралды 6 М.
LOVE LETTER - POPPY PLAYTIME CHAPTER 3 | GH'S ANIMATION
00:15
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 11 МЛН
Этот Пёс Кое-Что Наделал 😳
00:31
Глеб Рандалайнен
Рет қаралды 4 МЛН
HOW DID HE WIN? 😱
00:33
Topper Guild
Рет қаралды 45 МЛН
VRD Carbon Kit: My Lousy Opinion
15:20
Brokennib RC
Рет қаралды 3 М.
The 5 Must have Mods for the SCX6
9:15
Exocaged RC
Рет қаралды 19 М.
Finally got the huge SCX6!!!  Mods, Upgrades and First RC Run!
22:11
Ricky's Garage Vibes
Рет қаралды 9 М.
Huge SCX6 RC Crawler Gets a RIGIDITY Upgrade!
14:57
RC-TNT
Рет қаралды 8 М.
AXIAL 1/6 SCALE SCX6 HONCHO: UPDATE
6:28
ProNoobRC
Рет қаралды 7 М.
Running the upgraded scx6 honcho.
11:57
Soso NHRC
Рет қаралды 696
Scx6 Honcho Problems - Issues - Upgrades
14:22
BigHead RC
Рет қаралды 6 М.
R.C. Trail Crawling. Axial Scx6 Jeep trail crawling to Christie Falls.
12:08
RCIslandTrailCrawler
Рет қаралды 1,5 М.
Mustang Shelby GT500: The Ultimate Muscle Car
0:14
9EPIC
Рет қаралды 12 МЛН
все завёл и убежал #питбайк #dirtbike
0:25
Что делать, если тормоза отказали??? #факты
0:57
Время знаний
Рет қаралды 1 МЛН
😳 ВЫЖИВАЮ В ДРИФТ МАШИНЕ
0:39
Настя, это где?
Рет қаралды 2,3 МЛН