SDG

Рет қаралды 15,599

Күн бұрын

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyp...
Aixun Website: aixuntech.com
Aixun H310D: s.click.aliexpress.com/e/_DdP...
Picoscope 5000 Series: www.picotech.com/oscilloscope...
Support the Channel with Patreon: / sdgelectronics
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made Solder: solderking.com/
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made solder available at Kaisertech:
UK JBC Distributor kaisertech.co.uk/ Discount Code: "SDG5"
----------------------------------------------------------------------------------------------------------------------
0:00 Introduction
1:24 PCBWay
1:55 What's in the box?
2:17 Handpiece Detail
3:30 Rework Nozzles
4:50 Handpiece Stand
5:49 Control Unit
8:09 Inside the Unit
13:16 GUI and Functionality
20:56 Firmware Update/Aixun Cloud
22:33 Calibration
24:32 Conclusions
----------------------------------------------------------------------------------------------------------------------
3D Printers:
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Artillery Genius at Banggood: bit.ly/32iG2dv
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M at Banggood: bit.ly/2YooVll
Geeetech A20M at AliExpress: bit.ly/3oBqo2I
Geeetech PLA+ Filament: amzn.to/3gelSX1
Ender 3 V2 at Banggood: bit.ly/36lN8Ny
Ender 3 V2 at AliExpress: bit.ly/3j1C2CO
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Aixun T420D On AliExpress: bit.ly/3cQXXhh
Aixun T3B on Aliexpress: bit.ly/3CHerj1
Aixun T3B on Aliexpress: bit.ly/3cDkWIY
Aixun T3A on Aliexpress: bit.ly/30LDcgG
AiXun T3A on Aliexpress: bit.ly/2VdRVhU
Yihua 853A Preheater: www.banggood.com/custlink/DGD...
Youyue 946C Hotplate at Banggood: bit.ly/2MuLwqM
Youyue 946C on AliExpress: bit.ly/374v3Tp
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.com/custlink/3KK...
AC Version: www.banggood.com/custlink/3GK...
T12 Iron Tips: www.banggood.com/custlink/3DG...
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
-------------------------------------------------------------------------------------------------
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectronics.co.uk/
-------------------------------------------------------------------------------------------------
#ElectronicsCreators

Пікірлер: 56

@ewaczor4528 11 ай бұрын

Finally one of the thinking manufacturers of soldering equipment that used rotary regulators read encoders for handling, temperature and air. I don't know why manufacturers gave up rotating adjustments that work quickly in favor of clicking on buttons where this adjustment time is difficult. Kudos to Aixun for the rotary adjustment. I'm getting rid of those push button hotair stations and buying an Aixun.

@ariewijaya1679 6 ай бұрын

But the quickest way to set temp and airflow is the calculator style button.

@strickos91 3 ай бұрын

The 26awg ground wire did not make avoid this product ?!

@Keiuran 2 ай бұрын

@@strickos91 Can it not be replaced?

@cdyoutoob 11 ай бұрын

Looks to me those nozzles are intended to face down in the stand. That would make it easy to insert one into the handpiece single handed. Shame they didn't ship some angled nozzles.

@brianwood5220 11 ай бұрын

Yes, I thought that about the nozzles facing down to install 😀

@dannyperry8070 2 ай бұрын

I purchased a JDI 863 from Ali. The issue is that I am in the US and max power I got out of it was about 450 watts. They did not make internal changes for 110v operation.

@davadoff 17 күн бұрын

Did you order a 110v version? You need to replace or modify the heater in the handle to a 120v one and it should work normally (assuming the internal wiring like shown in this video is not too thin).

@MrPolaris800crew 9 ай бұрын

in all honesty i think you are the best KZfaqr reviewer for us Electronic geeks, keep up the good work.

@bobweiram6321 11 ай бұрын

On most hot air stations, you switch the heating element from 220V to 120V and vice versa by wiring them in parallel or series.

@sdgelectronics 11 ай бұрын

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyping/ Aixun Website: aixuntech.com Aixun H310D: s.click.aliexpress.com/e/_DdPD4bT Picoscope 5000 Series: www.picotech.com/oscilloscope/5000/flexible-resolution-oscilloscope Support the Channel with Patreon: www.patreon.com/sdgelectronics

@ServiceRoom 11 ай бұрын

Хорошая станция тоже сегодня получил.

@th3drizzl378 11 ай бұрын

I love all my aixun stuff and i have Almost the entire lineup but this one didn't Impress me nearly as much as i hoped. in fact my modded best bet is back on my desk now VS this one. maybe with a little time it will get better and they need to release a proper 110v unit

@brianwood5220 11 ай бұрын

Nice little unit, but it could do with a few improvements mainly the things that you've mentioned. Such as, the short tube, and the lack of decent earthing. Overall though, it's a nice looking unit. One which I think Would fit well with my current equipment quite nicely. Thanks for sharing, Steve.

@hervedonner1864 8 ай бұрын

Thanks for all you do. Aixun just released a new T320 station, it would be amazing if you could have a look :)

@kml1699 8 ай бұрын

i had used couple to cheaper hot soldering station but QUICK 861DW is best for me had been using since 4 years no any issue. i am very happy with 861Dw

@TheEmbeddedHobbyist 11 ай бұрын

A[ways nice to see that all the hard work I put into getting equipment through the CE marking process, is not being copied by the overseas sellers. I'm surprised how many UK companies still chose to ignore the wrongly marked "ce" and pass it off as "CE", when will we see a UKAC clone marking.

@jeffrbake 26 күн бұрын

I use their soldering station, this seems like it may be the same value proposition

@dannyperry8070 2 ай бұрын

The JDI 863 Looks exactly the same just different colors.

@travisfrost6508 10 ай бұрын

There is no 110v version. I asked aixun and ordered this one anyway. Also for a 110v to 220/240v step up transformer

@bobweiram6321 10 ай бұрын

Take apart the handle and check the heater wiring. On some of them, you can rewire it from series (220V) to parallel (120V).

@espenhansen4791 10 ай бұрын

Seems like Aixun copied JDI 863, and installed their own software on it. Actually GUI from JDI looks better. But Aixun is good at firmware upgrade. So they may redesign the look soon.🙂

@hitechmaster69 11 ай бұрын

Hello dear, sorry, were you able to connect the bluetooth with the app? I've tried many ways, but the app downloaded and updated from the official aixun website just doesn't connect... You know how Can connect to pc and see it on big screen? Thanks for the explanations... 👍🏻🔝

@GenerationXT 11 ай бұрын

I like the handpiece, but there are simply too many bugs. The wire they used inside makes me question whether this unit is even capable of 1000 watts.

@hitechmaster69 11 ай бұрын

Hi dear, do you know why it doesn't connect with bluetooth to the pc? Please I need to understand how I can fix this. Thank you in advance.

@timturner7609 6 ай бұрын

5:25 turn it over. Tips go in the other way round so you can simply push them on

@phuang3 11 ай бұрын

What was the temperature and fan speed at 23:40? I'm interested in this hot air station.

@SuperRealhigh 11 ай бұрын

Can you please review Aixun p3208 power supply

@NicksStuff Ай бұрын

So the smart functions didn't really work. Have they improved since?

@HwAoRrDk 11 ай бұрын

20:21 Long press MENU to save what value?!? 😆

@VoeViking 5 ай бұрын

If it needs an app I don't want it.

@user-xb9qb1gn3w 10 ай бұрын

There is no 110v for this device. it only comes 220v

@TheFelix63 10 ай бұрын

It's not easy to replace that yellow ground wire, but assuming you replace it you void the warranty, so you should keep it as is

@Hi-Fi_Surgery 11 ай бұрын

Aixun H310D or Sugon 8650?

@LTronicaAssistec 11 ай бұрын

sugon 8650

@idr3aming_inc 3 ай бұрын

Most of sugon always faulty on sensor issue

@Keiuran 2 ай бұрын

Get the Atten

@williambohnney6560 11 ай бұрын

Axiun has horrible customer service, tried to contact them about issues with T3b handles, never responded.

@macakcat 11 ай бұрын

looks like the ac voltage is rms

@Manawyrm 11 ай бұрын

no, that 230V/240V figure we usually give over here is already RMS. our mains is 325V peak... so yeah, the reading is way off, I'm hoping it isn't using that for any kind of regulation.

@IanScottJohnston 11 ай бұрын

I think the nozzles store up the other way (per photos on the web) so that you can remove a nozzle as you had shown but then insert a new one even whilst hot. EDIT: Oh!.....@cdyoutoob beat me to it....:-)

@thomasleerriem6872 6 ай бұрын

Chinese device with WIFI. That's a red flag right there.

@antibrevity 11 ай бұрын

That's a seriously half-baked UI and it really detracts from AiXun's brand. They seem to want to build a name, but aren't paying attention to the details. There's just no excuse for not grounding properly or using proper gauges when they've otherwise gone to the trouble of tidying the wiring and it would seem a lot higher quality if they quieted the blower as other brands do. This is disappointing for the price. While the handpiece and stand are good enough, the base station and UI are just unfinished and bad; good intentions, poorly executed.

@davadoff 17 күн бұрын

They can’t be trusted to make anything with mains wiring. More or less all AliExpress manufacturers are like that.

@AbulKalam-ie2pf 10 ай бұрын

hello sir, I am from Bangladesh, I want to know about this hot gun. someone said it need to activation every year. it's right or wrong? can you answer me please.

@Hi-Fi_Surgery 11 ай бұрын

I'm little disappointed about the hardware build quality, expected linear power supply for the logic and fan

@jaro6985 11 ай бұрын

Zero benefit for a linear PSU here.

@Hi-Fi_Surgery 11 ай бұрын

@@jaro6985 durability

@JohnDoe-wb7ng Ай бұрын

@@Hi-Fi_Surgery please elaborate

@davadoff 17 күн бұрын

@@jaro6985 he probably means transformer based PSU.

@davadoff 17 күн бұрын

@@JohnDoe-wb7ng It makes sense to use a transformer. Since it doesn’t have to run the heater, it can be small and cheap. I wouldn’t trust those Chinese ‘homemade’ switchmode PSUs as far as I could throw them.